Jump to content

AlexWhitehouse_

Active Members
  • Posts

    9
  • Joined

  • Last visited

Everything posted by AlexWhitehouse_

  1. Currently i'm using the built in Wifi in my laptop connected to my router. The wp6.sh script crashes when I try enter the Wlan config.. I press enter and it just goes completely unresponsive and tries to use 100% CPU power and about 2.35GB of RAM even when the terminal is closed.. End up having to force quit the process running twice before it finally stops. Ifconfig before NANO: lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 options=3<RXCSUM,TXCSUM> inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 nd6 options=1<PERFORMNUD> gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=10b<RXCSUM,TXCSUM,VLAN_HWTAGGING,AV> ether c8:2a:14:17:3a:7d nd6 options=1<PERFORMNUD> media: autoselect (none) status: inactive en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether e4:ce:8f:0b:1d:80 inet6 fe80::e6ce:8fff:fe0b:1d80%en1 prefixlen 64 scopeid 0x5 inet 192.168.1.11 netmask 0xffffff00 broadcast 192.168.1.255 nd6 options=1<PERFORMNUD> media: autoselect status: active en2: flags=963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX> mtu 1500 options=60<TSO4,TSO6> ether d2:00:1c:bb:da:40 media: autoselect <full-duplex> status: inactive fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078 lladdr 70:cd:60:ff:fe:cb:bd:a4 nd6 options=1<PERFORMNUD> media: autoselect <full-duplex> status: inactive p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304 ether 06:ce:8f:0b:1d:80 media: autoselect status: inactive bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=63<RXCSUM,TXCSUM,TSO4,TSO6> ether ca:2a:14:71:de:00 Configuration: id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0 maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200 root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0 ipfilter disabled flags 0x2 member: en2 flags=3<LEARNING,DISCOVER> ifmaxaddr 0 port 6 priority 0 path cost 0 nd6 options=1<PERFORMNUD> media: <unknown type> status: inactive utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380 inet6 fe80::3998:7faa:2a09:9fdf%utun0 prefixlen 64 scopeid 0xa inet6 fdfc:7126:3072:2666:3998:7faa:2a09:9fdf prefixlen 64 nd6 options=1<PERFORMNUD> Ifconfig after NANO: lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 options=3<RXCSUM,TXCSUM> inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 nd6 options=1<PERFORMNUD> gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=10b<RXCSUM,TXCSUM,VLAN_HWTAGGING,AV> ether c8:2a:14:17:3a:7d nd6 options=1<PERFORMNUD> media: autoselect (none) status: inactive en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether e4:ce:8f:0b:1d:80 inet6 fe80::e6ce:8fff:fe0b:1d80%en1 prefixlen 64 scopeid 0x5 inet 192.168.1.11 netmask 0xffffff00 broadcast 192.168.1.255 nd6 options=1<PERFORMNUD> media: autoselect status: active en2: flags=963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX> mtu 1500 options=60<TSO4,TSO6> ether d2:00:1c:bb:da:40 media: autoselect <full-duplex> status: inactive fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078 lladdr 70:cd:60:ff:fe:cb:bd:a4 nd6 options=1<PERFORMNUD> media: autoselect <full-duplex> status: inactive p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304 ether 06:ce:8f:0b:1d:80 media: autoselect status: inactive bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=63<RXCSUM,TXCSUM,TSO4,TSO6> ether ca:2a:14:71:de:00 Configuration: id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0 maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200 root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0 ipfilter disabled flags 0x2 member: en2 flags=3<LEARNING,DISCOVER> ifmaxaddr 0 port 6 priority 0 path cost 0 nd6 options=1<PERFORMNUD> media: <unknown type> status: inactive utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380 inet6 fe80::3998:7faa:2a09:9fdf%utun0 prefixlen 64 scopeid 0xa inet6 fdfc:7126:3072:2666:3998:7faa:2a09:9fdf prefixlen 64 nd6 options=1<PERFORMNUD> en4: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=4<VLAN_MTU> ether 00:c0:ca:8d:7d:15 inet6 fe80::2c0:caff:fe8d:7d15%en4 prefixlen 64 scopeid 0xb inet 172.16.42.133 netmask 0xffffff00 broadcast 172.16.42.255 nd6 options=1<PERFORMNUD> media: autoselect (100baseTX <full-duplex,flow-control>) status: active
  2. At the moment I can use my internet fine via ethernet cable or over wifi. However when I connect the NANO I cannot connect to the internet, cannot use the wp6.sh script and cannot access the NANO over 172.16.42.1:1471.. netstat -nr pre NANO plugin: Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.1.1 UGSc 34 0 en1 127 127.0.0.1 UCS 0 0 lo0 127.0.0.1 127.0.0.1 UH 1 3425 lo0 169.254 link#5 UCS 0 0 en1 192.168.1 link#5 UCS 1 0 en1 192.168.1.1/32 link#5 UCS 1 0 en1 192.168.1.1 6c:b0:ce:20:a8:53 UHLWIir 37 159 en1 918 192.168.1.11/32 link#5 UCS 1 0 en1 192.168.1.255 ff:ff:ff:ff:ff:ff UHLWbI 0 2 en1 Internet6: Destination Gateway Flags Netif Expire ::1 ::1 UHL lo0 fdfc:7126:3072:2666::/64 fe80::3998:7faa:2a09:9fdf%utun0 Uc utun0 fdfc:7126:3072:2666:3998:7faa:2a09:9fdf link#10 UHL lo0 fe80::%lo0/64 fe80::1%lo0 UcI lo0 fe80::1%lo0 link#1 UHLI lo0 fe80::%en1/64 link#5 UCI en1 fe80::e6ce:8fff:fe0b:1d80%en1 e4:ce:8f:b:1d:80 UHLI lo0 fe80::%utun0/64 fe80::3998:7faa:2a09:9fdf%utun0 UcI utun0 fe80::3998:7faa:2a09:9fdf%utun0 link#10 UHLI lo0 ff01::%lo0/32 ::1 UmCI lo0 ff01::%en0/32 link#4 UmCI en0 ff01::%en1/32 link#5 UmCI en1 ff01::%utun0/32 fe80::3998:7faa:2a09:9fdf%utun0 UmCI utun0 ff02::%lo0/32 ::1 UmCI lo0 ff02::%en0/32 link#4 UmCI en0 ff02::%en1/32 link#5 UmCI en1 ff02::%utun0/32 fe80::3998:7faa:2a09:9fdf%utun0 UmCI utun0 netstat -nr after NANO plugin: Internet: Destination Gateway Flags Refs Use Netif Expire default 172.16.42.1 UGSc 6 0 en4 default 192.168.1.1 UGScI 10 0 en1 127 127.0.0.1 UCS 0 0 lo0 127.0.0.1 127.0.0.1 UH 1 3425 lo0 169.254 link#11 UCS 0 0 en4 169.254 link#5 UCSI 0 0 en1 172.16.42/24 link#11 UCS 1 0 en4 172.16.42.1/32 link#11 UCS 1 0 en4 172.16.42.1 0:c0:ca:80:7c:2d UHLWIir 7 78 en4 1200 172.16.42.133/32 link#11 UCS 1 0 en4 172.16.42.255 ff:ff:ff:ff:ff:ff UHLWbI 0 6 en4 192.168.1 link#5 UCS 1 0 en1 192.168.1.1/32 link#5 UCS 1 0 en1 192.168.1.1 6c:b0:ce:20:a8:53 UHLWIir 12 13 en1 1195 192.168.1.11/32 link#5 UCS 1 0 en1 192.168.1.255 ff:ff:ff:ff:ff:ff UHLWbI 0 10 en1 Internet6: Destination Gateway Flags Netif Expire ::1 ::1 UHL lo0 fdfc:7126:3072:2666::/64 fe80::3998:7faa:2a09:9fdf%utun0 Uc utun0 fdfc:7126:3072:2666:3998:7faa:2a09:9fdf link#10 UHL lo0 fe80::%lo0/64 fe80::1%lo0 UcI lo0 fe80::1%lo0 link#1 UHLI lo0 fe80::%en1/64 link#5 UCI en1 fe80::e6ce:8fff:fe0b:1d80%en1 e4:ce:8f:b:1d:80 UHLI lo0 fe80::%utun0/64 fe80::3998:7faa:2a09:9fdf%utun0 UcI utun0 fe80::3998:7faa:2a09:9fdf%utun0 link#10 UHLI lo0 fe80::%en4/64 link#11 UCI en4 fe80::2c0:caff:fe8d:7d15%en4 0:c0:ca:8d:7d:15 UHLI lo0 ff01::%lo0/32 ::1 UmCI lo0 ff01::%en0/32 link#4 UmCI en0 ff01::%en1/32 link#5 UmCI en1 ff01::%utun0/32 fe80::3998:7faa:2a09:9fdf%utun0 UmCI utun0 ff01::%en4/32 link#11 UmCI en4 ff02::%lo0/32 ::1 UmCI lo0 ff02::%en0/32 link#4 UmCI en0 ff02::%en1/32 link#5 UmCI en1 ff02::%utun0/32 fe80::3998:7faa:2a09:9fdf%utun0 UmCI utun0 ff02::%en4/32 link#11 UmCI en4 Any help would be much appreciated
  3. Ok worked out the problem, silly me I forgot i'd wiped my PI clean... Just needed to reinstall postgresql...
  4. /etc/init.d/postgresql: No such file or directory Getting this error when trying to start postgresql? Even "service postgresql start" gives the error message: Failed to start postgresql.service: Unit postgresql.service failed to load: No such file or directory. Any help?
×
×
  • Create New...