Jump to content

Having some Turtle problems


overwraith
 Share

Go to solution Solved by Mr-Protocol,

Recommended Posts

Ok, so I am trying to get this turtle to work on my computer, unfortunately I am working in a windows environment. This is the first time I plugged the turtle in, and I would like to reflash it. Unfortunately it appears that windows doesn't like the drivers associated with the turtle. The turtle is listed in device manager under "other devices", "USB 10/100" LAN correct? If so then I am actually getting a yellow exclamation mark next to the device.

The drivers for this device are not installed. (Code 28)

There is no driver selected for the device information set or element.


To find a driver for this device, click Update Driver.

One goes to update driver, and it doesn't accept a .bin file. Should I use the ducky flashing procedure to flash this? To complicate matters my router seems to use the default ip address that the lan turtle uses. I am a bit tired tonight. I will try to fix this mess tomorow. I just rebuilt my comptuer also, so I will probably have to get all that ducky firmware flashing software working correctly again. Some of this stuff has kinda taken back seat to other things that need doing.

Link to comment
Share on other sites

Yep, that fixed it. How necessary do you think it would be to reset the device to factory defaults? It did just come through the mail. I just hadn't plugged it in since I got it.

...

It seems that my password is no longer working. Probably a typo or something, but I guess I will have to reset anyway... Lan turtle is a good idea, it just seems like it's a little difficult to set up correctly...

Edited by overwraith
Link to comment
Share on other sites

I actually was able to connect to the login screen though. IDK. I will try a few things, perhaps even disconnect from my local net in order to get the reset procedure working. If all else fails, and I still don't have the thing working I will consider an RMA, but not before I exaust a few other alternatives. Your password set program does check input passwords to make sure they are the same right, for example if I typeed password, and pas$word while setting up the turtle?

Edited by overwraith
Link to comment
Share on other sites

I was able to set a password after your first post, so the password is set, it's just whenever I type that password in it tells me it is incorrect. So what probably just happened is that the password is set, and I accidentally mistyped something, or there's a bug in the password input program. So essentially now I am ssh-ing into it and I can't get past the login screen. So what I am wondering is if the login setup prompt is programmed correctly. IDK, It is a pretty wierd coincidence that I keep typing my password in and keep getting it wrong, considering I would have had to type it in incorrectly ***twice*** on the turtle setup screen in order to get this problem.

Edited by overwraith
Link to comment
Share on other sites

Ok, I can connect now. Password was probably too complex, but it was really wierd that it didn't work at all because typing twice is supposed to alert you if you didn't type it correctly. That's why people do it. It is to make sure you typed as intended.

Whoever thought of giving networking devices web pages for setup was pretty smart. It's cool that you can upload via a web control. How much other web stuff can we do with the turtle? Would it be possible to host a webpage during normal configuration procedures?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...