Jump to content

odeon

Active Members
  • Content Count

    69
  • Joined

  • Last visited

Everything posted by odeon

  1. Hi all this is NOT my skillset by any means but hopefully someone can help. I was going to hook my brand new pineapple VII to my new netgear ac2300 to take it for a spin BUT I ran an mtr test and got these results. My concern is what is happening between 10.16.0.1 and 174.xx.xxx.xx I have NO idea how to diagnose this. The layout is RCN cable to Arris SB8200 modem cat5e ( from netgear box) to netgear ac2300. All factory reset, no QOS or monitoring enabled. Strange thing is that if I turn OFF the vpn the block goes away and all is normal. not sure it's the ISP Rcn doing this. .|--
  2. now THAT is great thinking @Rkiver !!! I do wish I had even a single neuron 🙂 thanks so much GREAT help.
  3. Hi there I'm a hardwired advocate for some time now BUT am considering getting a boat, stop giggling!!! I have NO clue about hotspot tech and would like some ideas as to what other hak5 er's use in their day to day. Specifically what phones, what data plans and what mobile hotspot pucks are worth thinking about. Right now I'm looking at tmobile with a Nighthawk M1 hotspot hooked up to a netgear ac2300. ANY help would be appreciated.
  4. will do BUT the Ipad is gen 1 so... Right now NOTHING is working at all regarding xfinityWIFI hotspot. That's a HUGE problem for me as I refuse to have a home wifi set up, I only have wired to DHCP 192.168.1.nnn router. I can't hook this thing up to the internets so right now it's a $100 paperweight 🙂
  5. Hi @Hike thanks for the reply. I didn't think of that. Makes a LOT of sense that xfinity would pull a stunt like that. I'll do some sniffing around as well later on. Thanks for the link
  6. thank you so much @Foxtrot I'm having some difficulty with my new P7 set up and ANY help is very welcome.
  7. Hi again exec4 I'm getting WORSE. I am so sorry NOT to have done this analysis before. I have attached the basic output of dmesg ( USB ONLY) and ifconfig with before and after runs. I can't see it if it is there. thanks for the interest and if you have any other things I can try please advise. p7 ether.txt
  8. Hi all so I plugged my amazon basic usb ethernet into the P7 usb port and it's detected but not working? I plugged it into my router ( assigning dhcp 192.168.1.n range) BUT no lights. If I look in SETTINGS usb I see bus 001 device 005 vid/pid 0b95:1790 asix electronic corp AX88179 gigabit ethernet There are NO lights lit on the USB ethernet on the P7 BUT it works fine on my Lenovo X1 carbon. What am I missing here?
  9. Having all sorts of issues with setting up the p7 BUT this one is REALLY bugging me. Here's the situation 1 I start the P7 and log into the management page using a Pi3b+ wifi. 2 I scan for wifi's using the default wlan2 antenna and do NOT see the xfinity hotspot on the results list. 3 on the same table ( about 6 feet apart) is an IPAD which not only can SEE the xfinitywifi ap but can log into it and gets 10mbs download. So what is going on? why can't the P7 see the xfinitywifi when the IPAD can?
  10. Worked out GREAT, so far so good 🙂 your idea was really helpful. Thanks so much
  11. Hi exec4 GREAT idea and I completely missed that! thanks. Makes a LOT of sense and I should have spotted it. Tried hooking it to the POWERED hub and right now the blue light stays ON , thanks again for the assist. Odeon.
  12. HI there, I want to connect my new P7 to a WIRED lan but can't figure out how to do it. The setup is as follow: P7 usbC connected to powered hub for POWER p7 USB connected to AMAZON BASICS USB 3.0 gigabit ethernet adapter plugged into switch to router. Pi3 model 3 b+ ethernet port plugged into switch to router. I have successfully connected to the P7 from the pi via the web browser and updated the firmware by downloading via the ethernet on the Pi and UPloading to the P7 as per the EXCELLENT videos ( thanks Darren). I have set up the P7 with the ssid's password an
  13. Hi all just dug my old friend out of storage. I want to log into an xfinity hotspot with a user name and password BUT I don't know how to do it??? I'm running firmware 3.0 ( I think) I know how to select an AP but I don't know how to get the user and password entered??? thanks
  14. A great friend owns and operates a online tv station that MIGHT get hit by net neutrality throttling. I mentioned that you guys are the best when it comes to figuring out rational ways around things AND have products to sell. His normal audience is about 30,000 people ( I think) all of which would be interested in stuff you sell. let me know who to email so I can hook you guys up. I don't want to say the name of the company on this forum BUT you will know it when I send the email
  15. done all the usual reset to factory stuff. Power off dips 1u2d3d4u5up Power back on. wait for 15 minutes. dips to all UP then Power back on and configuration stays in memory???? the LED's are doing this all the time. I have flashed the beta 3 to firmware about a year ago? ANY ideas how to REALLY factory reset please? green on blue on red constantly flashing
  16. Hi all so I have tried several times to get recon working and it returns no results. It's populating the ssid list and when I run fern on another machine with a lesser antenna at the same location I see hundreds??? what am I doing wrong? thanks
  17. Hey Barry thanks for the reply AND I got the damn thing working. Seems it didn't like the wp6.sh on the PV for some reason. The MOMENT I used the wp5.sh I was back in business. with the wp6.sh it seemed to loop on the detection phase. I suppose because it wasn't using USB. Still it's working fine now. Thanks for all your GREAT help.
  18. downloaded wp6.sh made executable runs BUT think I have this wired up wrong? the pineV is connected on ETH0 via the rj45 the wlan0 is on an alpha awus036nha my PARROTOS pc is connected to xfinitywifi using wlan0 I boot into PARROTOS and connect to xfinitywifi and successfully browse to cnn.com to test it using the firefox browser. I run ./wp6.sh and take the guided option BUT don't really get which interface is for the INTERNET? is it ETH0 or Wlan0 the youtube videos I have found seem to have a different wp6.sh if someone can point me at a youtube that
  19. Hi all I seem to remember that the Pineapple V 's mac address can be changed everytime it boots up but I can't remember HOW? ALSO can I run wp6.sh against it? I loaded up the nano gui front end onto it and it seems to be working fine BUT not sure the difference between wp5.sh and wp6.ch? thanks all
  20. @datajumper thanks so much for taking the time, I'm going to try it out as soon as I reassemble the system. Great post really clear.
  21. check dip switches I THINK THEY ARE: default configuration up, up, up, up, up (from left to right) make sure you are flashing the unit properly BUT here is a prior thread that seems similar to yours https://www.wifipineapple.com/bugs/161
  22. Hi there I have an awus036nh and I wanted to change the country code on it. Is there some reason why the newer ones ( I bought it about 1 year ago, cannot have the country code changes in Parrot OS or Kali? I "thought" I used to be able to set the country code to GY or BO but it doesn't seem to work anymore. thanks for any help at all
  23. my suggestion go back to first principals. Solid Blue light means the unit is ready, it flashes for Wlan0 when traffic goes through it, green light is just to show power and the Red light is for Wlan1 Red - WLAN1 (RTL8187) (Antenna by dip switches) so check dip switches
×
×
  • Create New...