Jump to content

unideb50

Active Members
  • Content Count

    14
  • Joined

  • Last visited

About unideb50

  • Rank
    Hackling

Recent Profile Visitors

1,066 profile views
  1. Hi does someone know how may I configure the mobile broadband settings. because it is not connecting. the information that provided me the ISP is as follows Interface Name: ttyUSB0 Protocol: ppp Service: Device: 12d1:1506 APN: ba.amx Username: clarogprs Password: clarogprs999 Default Route: ppp redial: 1 Peer DNS: 0 DNS: 8.8.8.8 Keepalive: 1 pppd options: the information in bold was entered by me, since the ISP only gave me the APN, username and pass, My modem is a Bus 001 Device 006: ID 12d1:1506 Huawei Technologies Co., Ltd. Modem/Networkcard and
  2. ok thanks!! I will let you know what came from the readings. quick question: how much time do I need to leave the panel under the sun before starting to take readings on the voltage, since I dont have a private place with direct sunlight and I will have to go to the street to make the measurement.
  3. you panel is smaller, will you useit only to power the pinapple or would you add also a batter and a charger controller in the mix?
  4. am i connecing it right. circle is the solar panel, the middle goes to the battery and the plug goes to the pineapple? pics of the charger controller.
  5. Hi Im also doing something similar. pics of equipment
  6. Hi Ettercap is no longer working. As soon I hit the start the process stops. how can i find out what is not working without reflashing it. Im seeing the following errors when I try to download previous captures ettercap log_1389567143.log [January 12 2014 22:52:25] Listening on eth0... (Ethernet) eth0 -> 00:13:37:XXXXXXXX invalid invalid SSL dissection needs a valid 'redir_command_on' script in the etter.conf file Privileges dropped to UID 65534 GID 65534... 28 plugins 39 protocol dissectors 53 ports monitored 7587 mac vendor fingerprint 1698 tcp OS fin
  7. using a SLA battery? something like this. http://www.ebay.com/itm/New-Genuine-UB12220-40696-AGM-12V-22AH-12-Volt-22-Amp-Sealed-Lead-Acid-Battery-/190952081823?pt=US_Rechargeable_Batteries&hash=item2c75a1899f is there any hazard using that kind of battery outside?
  8. Hi thanks for the reply I'm trying to have a second 3g stick as backup in case the first connection is down. I searched and it look that I could manage the connection with wvdial. have someone tried it? -------------- update root@Pineapple:/sd# ls infusions lost+found tmp usr wvdial-1.60 wvdialpkg root@Pineapple:/sd# cd wvdialpkg/ root@Pineapple:/sd/wvdialpkg# ls libuniconf4.6_4.6.1-7_mips.deb libwvstreams4.6-base_4.6.1-7_mips.deb libwvstreams4.6-extras_4.6.1-7_mips.deb wvdial_1.61-4.1_mips.deb root@Pineapple:/sd/wvdialpkg# opkg install libwvstreams4.6-base_4.6.1-7_
  9. Hi I just wanted to post that after setting up my MARK V. And messing around for a week until I understood how to configure. It worked. SSLSTRIP is working fine, dnsspoof too. My question is I cant find an infusion for aircrack-ng. Can I install it from the terminal window? Can I install it to the SDCard? Would it work two 3G sticks attached to the pineapple? I will post later some screens of it.
  10. Hi can someone please tell me where can I look for the information on each field please? I will write what I think please correct me if I'm wrong. Interface Name: anything or wlan0, eth0??? Protocol: 3g or ppp0? Service:umts? Device: 12d1:1436 or Huawei Technologies Co., Ltd. ?? APN: ba.amx Username: ctigprs Password: ctigprs999 Default Route:1? ppp redial:1 Peer DNS:0 DNS:8.8.8.8 Keepalive:1 pppd options: here is a copy of my log Bus 001 Device 008: ID 12d1:1506 Huawei Technologies Co., Ltd. Modem/Networkcard Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass
  11. Hi Sir Haxalot thanx for sharing that numbers. I'm going to run also some test with different antennas to see if that differs the power drain. I mena with two 14dbi panel, giving the device more capability to detect more signals thus making it to to pobably work at a full load the processor. This are only asumptions. I bought the markV and the external battery from the shop. the antenas from ebay. and also Im planning to try to expand the autonomy with a small solar panel. I bought this small panel to start testing the autonomy. but has not yet arrived. http://www.ebay.com/itm/16079134517
  12. Hi I just got mine two days ago. I'm onto a similar project. Mine involves replacing the pelican case with other outdoor box, replace both antennas with a 14 dbi panel. yes i know they are directional antennas, this is already taken in consideration. So. using the batter shipped with the pelican case I will also addd a charge controller plus a 3G modem. have you done any measures yet? related on how much the device consumes? do you know where can we ask?
×
×
  • Create New...