webdirector
-
Posts
121 -
Joined
-
Last visited
-
Days Won
2
Posts posted by webdirector
-
-
in The DMZ....
Thanks a million. to be honnest I do not know what did it but now it is working
Thanks a million !
If you ever are in Germnay I will pay you a beer ................. or two ;-)
-
Hello,
I have a powered USB HUB and I am afraid of destroying my pineapple with it.
The reason is if I have no power on pineapple and I connect the USB HUB that is plugged into mains I see the LED in Pineapple turn on.
I connect the back side of the hub, the part that usually connects to PC USB (not the front USB)
So I am surprised that there is power coming out. I am afraid if I connect the hub and the pineapple
to mains I will destroy the pineapple.
So is this normal? Can I just connect?
Thanks for help
-
here my log again:
00:05:43 Pineapple daemon.info pppd[4623]: Exit.
00:05:42 Pineapple local2.info chat[4627]: timeout set to 30 seconds
00:05:42 Pineapple local2.info chat[4627]: send (ATD*99***1#^M)
00:05:42 Pineapple local2.info chat[4627]: expect (OK)
00:05:42 Pineapple local2.info chat[4627]: expect (CONNECT)
00:05:42 Pineapple local2.info chat[4627]: ^M
00:05:42 Pineapple local2.info chat[4627]: ^M
00:05:42 Pineapple local2.info chat[4627]: OK
00:05:42 Pineapple local2.info chat[4627]: NO CARRIER
00:05:42 Pineapple local2.info chat[4627]: Failed (NO CARRIER)
00:05:42 Pineapple local2.info chat[4627]: ATD*99***1#^M^M
00:05:42 Pineapple local2.info chat[4627]: AT+CGDCONT=1,"IP","internet.eplus.de"^M^M
00:05:42 Pineapple local2.info chat[4627]: -- got it
00:05:42 Pineapple local2.info chat[4627]: -- failed
00:05:42 Pineapple daemon.err pppd[4623]: Connect script failed
00:05:41 Pineapple local2.info chat[4627]: timeout set to 10 seconds
00:05:41 Pineapple local2.info chat[4627]: send (ATE1^M)
00:05:41 Pineapple local2.info chat[4627]: send (AT+CGDCONT=1,"IP","internet.eplus.de"^M)
00:05:41 Pineapple local2.info chat[4627]: send (AT&F^M)
00:05:41 Pineapple local2.info chat[4627]: report (CONNECT)
00:05:41 Pineapple local2.info chat[4627]: expect (OK)
00:05:41 Pineapple local2.info chat[4627]: expect (OK)
00:05:41 Pineapple local2.info chat[4627]: abort on (NO CARRIER)
00:05:41 Pineapple local2.info chat[4627]: abort on (ERROR)
00:05:41 Pineapple local2.info chat[4627]: abort on (BUSY)
00:05:41 Pineapple local2.info chat[4627]: ^M
00:05:41 Pineapple local2.info chat[4627]: OK
00:05:41 Pineapple local2.info chat[4627]: OK
00:05:41 Pineapple local2.info chat[4627]: ATE1^M^M
00:05:41 Pineapple local2.info chat[4627]: AT&F^M^M
00:05:41 Pineapple local2.info chat[4627]: -- got it
00:05:41 Pineapple local2.info chat[4627]: -- got it
00:05:40 Pineapple kern.info kernel: [ 340.230000] Adding 2097148k swap on /dev/sdc2. Priority:-3 extents:1 across:2097148k
00:05:40 Pineapple daemon.notice pppd[4623]: pppd 2.4.5 started by root, uid 0
00:05:39 Pineapple user.notice usb-modeswitch: 1-1:1.6: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:05:39 Pineapple kern.warn kernel: [ 339.940000] EXT4-fs (sdc1): warning: maximal mount count reached, running e2fsck is recommended
00:05:39 Pineapple kern.info kernel: [ 339.980000] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
00:05:39 Pineapple kern.info kernel: [ 339.970000] EXT4-fs (sdc1): recovery complete
00:05:39 Pineapple kern.err kernel: [ 339.910000] EXT4-fs (sdc1): couldn't mount as ext2 due to feature incompatibilities
00:05:39 Pineapple kern.err kernel: [ 339.900000] EXT4-fs (sdc1): couldn't mount as ext3 due to feature incompatibilities
00:05:39 Pineapple daemon.info dnsmasq[1109]: using nameserver 8.8.8.8#53
00:05:39 Pineapple daemon.info dnsmasq[1109]: using local addresses only for domain lan
00:05:39 Pineapple daemon.info dnsmasq[1109]: reading /tmp/resolv.conf.auto
00:05:38 Pineapple user.notice usb-modeswitch: 1-1:1.5: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:05:38 Pineapple user.notice usb-modeswitch: 1-1:1.4: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:05:38 Pineapple user.notice usb-modeswitch: 1-1:1.3: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:05:38 Pineapple user.notice usb-modeswitch: 1-1:1.2: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:05:38 Pineapple kern.notice kernel: [ 338.220000] sd 32:0:0:0: [sdc] Attached SCSI removable disk
00:05:38 Pineapple kern.notice kernel: [ 338.190000] sd 32:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
00:05:38 Pineapple kern.notice kernel: [ 338.190000] sd 32:0:0:0: [sdc] Write Protect is off
00:05:38 Pineapple kern.notice kernel: [ 338.170000] sd 32:0:0:0: [sdc] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
00:05:38 Pineapple kern.notice kernel: [ 338.140000] sd 32:0:0:0: Attached scsi generic sg1 type 0
00:05:38 Pineapple kern.notice kernel: [ 338.130000] scsi 32:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
00:05:38 Pineapple kern.notice kernel: [ 338.120000] scsi 31:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
00:05:38 Pineapple kern.notice kernel: [ 338.120000] scsi 31:0:0:0: Attached scsi generic sg0 type 5
00:05:38 Pineapple kern.info kernel: [ 338.210000] sdc: sdc1 sdc2
00:05:38 Pineapple kern.debug kernel: [ 338.190000] sd 32:0:0:0: [sdc] Mode Sense: 0f 0e 00 00
00:05:37 Pineapple user.notice usb-modeswitch: 1-1:1.1: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:05:37 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:05:37 Pineapple kern.info kernel: [ 337.120000] scsi32 : usb-storage 1-1:1.6
00:05:37 Pineapple kern.info kernel: [ [337.120000] scsi31 : usb-storage 1-1:1.5
00:05:37 Pineapple kern.info kernel: [ 337.100000] usb 1-1: generic converter now attached to ttyUSB2
00:05:37 Pineapple kern.info kernel: [ 337.090000] usbserial_generic 1-1:1.4: generic converter detected
-
...... No that does not do anything.
Could I have a power problem ?
My setup is the 3G modem is connected directly in USB port of Pineapple and the Pineapple is powered by a 12V 2A power supply
any Ideas ?
Thanks
-
Hello,
yes it is SIMLOCK free. When I use the same 3 G modem with same card in my laptop it works fine
-
...... I had forgotten to put in the APN, Login and password.
............. sorry !
Now I see the 3G modem connects for few seconds. But it does not stay connected.
Here my Log:
00:06:03 Pineapple kern.alert kernel: [ 363.790000] Write-error on swap-device (8:0:80)
00:06:03 Pineapple kern.alert kernel: [ 363.750000] Write-error on swap-device (8:0:72)
00:06:03 Pineapple daemon.notice pppd[9929]: CHAP authentication succeeded
00:06:03 Pineapple daemon.info pppd[9929]: CHAP authentication succeeded
00:06:02 Pineapple daemon.notice pppd[9929]: Connect: 3g-wan2 /dev/ttyUSB0
00:06:02 Pineapple daemon.info pppd[9929]: Using interface 3g-wan2
00:06:02 Pineapple daemon.info pppd[9929]: Serial connection established.
00:06:01 Pineapple local2.info chat[9933]: timeout set to 30 seconds
00:06:01 Pineapple local2.info chat[9933]: timeout set to 10 seconds
00:06:01 Pineapple local2.info chat[9933]: send (ATE1^M)
00:06:01 Pineapple local2.info chat[9933]: send (ATD*99***1#^M)
00:06:01 Pineapple local2.info chat[9933]: send (AT+CGDCONT=1,"IP","internet.eplus.de"^M)
00:06:01 Pineapple local2.info chat[9933]: send (AT&F^M)
00:06:01 Pineapple local2.info chat[9933]: send ( ^M)
00:06:01 Pineapple local2.info chat[9933]: report (CONNECT)
00:06:01 Pineapple local2.info chat[9933]: expect (OK)
00:06:01 Pineapple local2.info chat[9933]: expect (OK)
00:06:01 Pineapple local2.info chat[9933]: expect (OK)
00:06:01 Pineapple local2.info chat[9933]: expect (CONNECT)
00:06:01 Pineapple local2.info chat[9933]: abort on (NO CARRIER)
00:06:01 Pineapple local2.info chat[9933]: abort on (ERROR)
00:06:01 Pineapple local2.info chat[9933]: abort on (BUSY)
00:06:01 Pineapple local2.info chat[9933]: ^M
00:06:01 Pineapple local2.info chat[9933]: ^M
00:06:01 Pineapple local2.info chat[9933]: ^M
00:06:01 Pineapple local2.info chat[9933]: OK
00:06:01 Pineapple local2.info chat[9933]: OK
00:06:01 Pineapple local2.info chat[9933]: OK
00:06:01 Pineapple local2.info chat[9933]: CONNECT
00:06:01 Pineapple local2.info chat[9933]: ATE1^M^M
00:06:01 Pineapple local2.info chat[9933]: ATD*99***1#^M^M
00:06:01 Pineapple local2.info chat[9933]: AT+CGDCONT=1,"IP","internet.eplus.de"^M^M
00:06:01 Pineapple local2.info chat[9933]: AT&F^M^M
00:06:01 Pineapple local2.info chat[9933]: -- got it
00:06:01 Pineapple local2.info chat[9933]: -- got it
00:06:01 Pineapple local2.info chat[9933]: -- got it
00:06:01 Pineapple local2.info chat[9933]: -- got it
00:06:00 Pineapple daemon.notice pppd[9929]: pppd 2.4.5 started by root, uid 0
00:05:59 Pineapple kern.info kernel: [ 359.710000] Adding 2097148k swap on /dev/sdl2. Priority:-12 extents:1 across:2097148k
00:05:59 Pineapple kern.info kernel: [ 359.450000] EXT4-fs (sdl1): recovery complete
00:05:59 Pineapple kern.info kernel: [ 359.450000] EXT4-fs (sdl1): mounted filesystem with ordered data mode. Opts: (null)
00:05:59 Pineapple kern.err kernel: [ 359.390000] EXT4-fs (sdl1): couldn't mount as ext2 due to feature incompatibilities
00:05:59 Pineapple kern.err kernel: [ 359.380000] EXT4-fs (sdl1): couldn't mount as ext3 due to feature incompatibilities
00:05:58 Pineapple user.notice usb-modeswitch: 1-1:1.6: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:05:58 Pineapple user.notice usb-modeswitch: 1-1:1.5: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:05:58 Pineapple user.notice usb-modeswitch: 1-1:1.4: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:05:58 Pineapple kern.notice kernel: [ 358.060000] sd 159:0:0:0: [sdl] Attached SCSI removable disk
00:05:58 Pineapple kern.notice kernel: [ 358.040000] sd 159:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
00:05:58 Pineapple kern.notice kernel: [ 358.030000] sd 159:0:0:0: [sdl] Write Protect is off
00:05:58 Pineapple kern.notice kernel: [ 358.030000] sd 159:0:0:0: [sdl] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
00:05:58 Pineapple kern.notice kernel: [ 358.020000] sd 159:0:0:0: Attached scsi generic sg1 type 0
00:05:58 Pineapple kern.notice kernel: [ 358.010000] scsi 159:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
00:05:58 Pineapple kern.notice kernel: [ 358.000000] scsi 158:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
00:05:58 Pineapple kern.notice kernel: [ 358.000000] scsi 158:0:0:0: Attached scsi generic sg0 type 5
00:05:58 Pineapple kern.info kernel: [ 358.060000] sdl: sdl1 sdl2
00:05:58 Pineapple kern.debug kernel: [ 358.040000] sd 159:0:0:0: [sdl] Mode Sense: 0f 0e 00 00
00:05:57 Pineapple user.notice usb-modeswitch: 1-1:1.3: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:05:57 Pineapple user.notice usb-modeswitch: 1-1:1.2: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:05:57 Pineapple user.notice usb-modeswitch: 1-1:1.1: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:05:57 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:05:56 Pineapple kern.info kernel: [ 357.000000] scsi159 : usb-storage 1-1:1.6
00:05:56 Pineapple kern.info kernel: [ 356.990000] scsi158 : usb-storage 1-1:1.5
00:05:56 Pineapple kern.info kernel: [ 356.980000] usbserial_generic 1-1:1.4: generic converter detected
00:05:56 Pineapple kern.info kernel: [ 356.980000] usb 1-1: generic converter now attached to ttyUSB2
00:05:56 Pineapple kern.info kernel: [ 356.970000] usbserial_generic 1-1:1.4: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
00:05:56 Pineapple kern.info kernel: [ 356.960000] usbserial_generic 1-1:1.4: The "generic" usb-serial driver is only for testing and one-off prototypes.
00:05:56 Pineapple kern.info kernel: [ 356.910000] usb 1-1: generic converter now attached to ttyUSB1
00:05:56 Pineapple kern.info kernel: [ 356.900000] usbserial_generic 1-1:1.3: generic converter detected
00:05:56 Pineapple kern.info kernel: [ 356.890000] usbserial_generic 1-1:1.3: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
00:05:56 Pineapple kern.info kernel: [ 356.880000] usbserial_generic 1-1:1.3: The "generic" usb-serial driver is only for testing and one-off prototypes.
00:05:56 Pineapple kern.info kernel: [ 356.870000] cdc_ether 1-1:1.1 wwan0: register 'cdc_ether' at usb-ehci-platform-1, Mobile Broadband Network Device, 02:50:f3:00:00:00
00:05:56 Pineapple kern.info kernel: [ 356.850000] usb 1-1: generic converter now attached to ttyUSB0
00:05:56 Pineapple kern.info kernel: [ 356.840000] usbserial_generic 1-1:1.0: generic converter detected
00:05:56 Pineapple kern.info kernel: [ 356.830000] usbserial_generic 1-1:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes.
00:05:56 Pineapple kern.info kernel: [ 356.830000] usbserial_generic 1-1:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
00:05:56 Pineapple kern.info kernel: [ 356.670000] usb 1-1: new high-speed USB device number 117 using ehci-platform
00:05:56 Pineapple kern.info kernel: [ 356.230000] usb 1-1: new high-speed USB device number 116 using ehci-platform
00:05:56 Pineapple kern.err kernel: [ 356.390000] hub 1-0:1.0: unable to enumerate USB device on port 1
00:05:55 Pineapple kern.info kernel: [ 355.790000] usb 1-1: new high-speed USB device number 115 using ehci-platform
00:05:55 Pineapple kern.info kernel: [ 355.350000] usb 1-1: new high-speed USB device number 114 using ehci-platform
00:05:55 Pineapple kern.err kernel: [ 355.950000] hub 1-0:1.0: unable to enumerate USB device on port 1
00:05:55 Pineapple kern.err kernel: [ 355.510000] hub 1-0:1.0: unable to enumerate USB device on port 1
00:05:55 Pineapple kern.err kernel: [ 355.070000] hub 1-0:1.0: unable to enumerate USB device on port 1
00:05:54 Pineapple kern.info kernel: [ 354.690000] usb 1-1: new high-speed USB device number 112 using ehci-platform
00:05:54 Pineapple kern.info kernel: [ 354.250000] usb 1-1: new high-speed USB device number 111 using ehci-platform
00:05:54 Pineapple kern.err kernel: [ 354.850000] hub 1-0:1.0: unable to enumerate USB device on port 1
00:05:54 Pineapple kern.err kernel: [ 354.410000] hub 1-0:1.0: unable to enumerate USB device on port 1
00:05:54 Pineapple daemon.notice netifd: Interface 'wan2' is now down
00:05:54 Pineapple daemon.info pppd[9509]: Exit.
00:05:54 Pineapple daemon.info dnsmasq[1113]: using nameserver 8.8.8.8#53
00:05:54 Pineapple daemon.info dnsmasq[1113]: using local addresses only for domain lan
00:05:54 Pineapple daemon.info dnsmasq[1113]: reading /tmp/resolv.conf.auto
00:05:53 Pineapple local2.info chat[9513]: timeout set to 10 seconds
00:05:53 Pineapple local2.info chat[9513]: send (AT&F^M)
00:05:53 Pineapple local2.info chat[9513]: report (CONNECT)
00:05:53 Pineapple local2.info chat[9513]: abort on (NO CARRIER)
00:05:53 Pineapple local2.info chat[9513]: abort on (ERROR)
00:05:53 Pineapple local2.info chat[9513]: abort on (BUSY)
00:05:53 Pineapple local2.info chat[9513]: -- write failed: Input/output error
00:05:53 Pineapple local2.err chat[9513]: Failed
00:05:53 Pineapple local2.err chat[9513]: Can't restore terminal parameters: Input/output error
00:05:53 Pineapple kern.warn kernel: [ 353.970000] Result: hostbyte=0x01 driverbyte=0x00
00:05:53 Pineapple kern.notice kernel: [ 353.950000] sd 153:0:0:0: [sdk] Synchronizing SCSI cache
00:05:53 Pineapple kern.info kernel: [ 353.970000] sd 153:0:0:0: [sdk]
00:05:53 Pineapple kern.info kernel: [ 353.940000] usbserial_generic 1-1:1.4: device disconnected
00:05:53 Pineapple kern.info kernel: [ 353.940000] generic ttyUSB2: generic converter now disconnected from ttyUSB2
00:05:53 Pineapple kern.info kernel: [ 353.930000] usbserial_generic 1-1:1.3: device disconnected
00:05:53 Pineapple kern.info kernel: [ 353.930000] generic ttyUSB1: generic converter now disconnected from ttyUSB1
00:05:53 Pineapple kern.info kernel: [ 353.910000] cdc_ether 1-1:1.1 wwan0: unregister 'cdc_ether' usb-ehci-platform-1, Mobile Broadband Network Device
00:05:53 Pineapple kern.info kernel: [ 353.900000] usbserial_generic 1-1:1.0: device disconnected
00:05:53 Pineapple kern.info kernel: [ 353.890000] usb 1-1: USB disconnect, device number 110
00:05:53 Pineapple kern.info kernel: [ 353.890000] generic ttyUSB0: generic converter now disconnected from ttyUSB0
00:05:53 Pineapple daemon.err pppd[9509]: Connect script failed
00:05:52 Pineapple daemon.notice pppd[9509]: pppd 2.4.5 started by root, uid 0
00:05:52 Pineapple daemon.info dnsmasq[1113]: using nameserver 8.8.8.8#53
00:05:52 Pineapple daemon.info dnsmasq[1113]: using local addresses only for domain lan
00:05:52 Pineapple daemon.info dnsmasq[1113]: reading /tmp/resolv.conf.auto
00:05:50 Pineapple daemon.notice netifd: Interface 'wan2' is now down
00:05:50 Pineapple daemon.info pppd[9418]: Exit.
00:05:49 Pineapple local2.info chat[9488]: alarm
00:05:49 Pineapple local2.info chat[9488]: Failed
00:05:49 Pineapple daemon.err pppd[9418]: Connect script failed
00:05:44 Pineapple local2.info chat[9488]: ~^?^C^@!^A-^@^D^X^Q~~^?^C^@!^A.^@^D|~~~^?^C^@!^A/^@^D $~~^?^C^@!^A0^@^Drk~~^?^C^@!^A1^@^D.1~~^?^C^@!^A2^@^DJ^~~^?^C^@!^A3^@
00:05:39 Pineapple local2.info chat[9488]: timeout set to 10 seconds
00:05:39 Pineapple local2.info chat[9488]: send (AT&F^M)
00:05:39 Pineapple local2.info chat[9488]: report (CONNECT)
00:05:39 Pineapple local2.info chat[9488]: expect (OK)
00:05:39 Pineapple local2.info chat[9488]: abort on (NO CARRIER)
00:05:39 Pineapple local2.info chat[9488]: abort on (ERROR)
00:05:39 Pineapple local2.info chat[9488]: abort on (BUSY)
00:05:39 Pineapple kern.info kernel: [ 339.430000] Adding 2097148k swap on /dev/sdk2. Priority:-11 extents:1 across:2097148k
00:05:39 Pineapple kern.info kernel: [ 339.120000] EXT4-fs (sdk1): recovery complete
00:05:39 Pineapple kern.info kernel: [ 339.120000] EXT4-fs (sdk1): mounted filesystem with ordered data mode. Opts: (null)
00:05:39 Pineapple kern.err kernel: [ 339.060000] EXT4-fs (sdk1): couldn't mount as ext2 due to feature incompatibilities
00:05:39 Pineapple kern.err kernel: [ 339.050000] EXT4-fs (sdk1): couldn't mount as ext3 due to feature incompatibilities
00:05:38 Pineapple user.notice usb-modeswitch: 1-1:1.6: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:05:38 Pineapple daemon.notice pppd[9418]: pppd 2.4.5 started by root, uid 0
00:05:38 Pineapple daemon.info dnsmasq[1113]: using nameserver 8.8.8.8#53
00:05:38 Pineapple daemon.info dnsmasq[1113]: using local addresses only for domain lan
00:05:38 Pineapple daemon.info dnsmasq[1113]: reading /tmp/resolv.conf.auto
00:05:37 Pineapple user.notice usb-modeswitch: 1-1:1.5: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:05:37 Pineapple user.notice usb-modeswitch: 1-1:1.4: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:05:37 Pineapple user.notice usb-modeswitch: 1-1:1.3: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:05:37 Pineapple user.notice usb-modeswitch: 1-1:1.2: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:05:37 Pineapple kern.notice kernel: [ 337.300000] sd 153:0:0:0: [sdk] Attached SCSI removable disk
00:05:37 Pineapple kern.notice kernel: [ 337.270000] sd 153:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
00:05:37 Pineapple kern.notice kernel: [ 337.270000] sd 153:0:0:0: [sdk] Write Protect is off
00:05:37 Pineapple kern.notice kernel: [ 337.260000] sd 153:0:0:0: [sdk] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
00:05:37 Pineapple kern.notice kernel: [ 337.250000] sd 153:0:0:0: Attached scsi generic sg1 type 0
00:05:37 Pineapple kern.notice kernel: [ 337.240000] scsi 153:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
00:05:37 Pineapple kern.notice kernel: [ 337.230000] scsi 152:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
00:05:37 Pineapple kern.notice kernel: [ 337.230000] scsi 152:0:0:0: Attached scsi generic sg0 type 5
00:05:37 Pineapple kern.info kernel: [ 337.300000] sdk: sdk1 sdk2
00:05:37 Pineapple kern.debug kernel: [ 337.270000] sd 153:0:0:0: [sdk] Mode Sense: 0f 0e 00 00
00:05:36 Pineapple user.notice usb-modeswitch: 1-1:1.1: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:05:36 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:05:36 Pineapple kern.info kernel: [ 336.230000] scsi153 : usb-storage 1-1:1.6
00:05:36 Pineapple kern.info kernel: [ 336.230000] scsi152 : usb-storage 1-1:1.5
00:05:36 Pineapple kern.info kernel: [ 336.200000] usb 1-1: generic converter now attached to ttyUSB2
00:05:36 Pineapple kern.info kernel: [ 336.190000] usbserial_generic 1-1:1.4: generic converter detected
00:05:36 Pineapple kern.info kernel: [ 336.180000] usbserial_generic 1-1:1.4: The "generic" usb-serial driver is only for testing and one-off prototypes.
00:05:36 Pineapple kern.info kernel: [ 336.180000] usbserial_generic 1-1:1.4: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
00:05:36 Pineapple kern.info kernel: [ 336.160000] usb 1-1: generic converter now attached to ttyUSB1
here my dmesg:
Execute: dmesg
[ 36.250000] tun: Universal TUN/TAP device driver, 1.6
[ 36.250000] tun: © 1999-2004 Max Krasnyansky
[ 36.520000] ip_tables: © 2000-2006 Netfilter Core Team
[ 36.760000] NET: Registered protocol family 24
[ 36.890000] nf_conntrack version 0.5.0 (458 buckets, 1832 max)
[ 37.130000] usb 1-1: new high-speed USB device number 3 using ehci-platform
[ 37.670000] scsi2 : usb-storage 1-1:1.0
[ 37.670000] scsi3 : usb-storage 1-1:1.1
[ 37.930000] usbcore: registered new interface driver ath9k_htc
[ 38.170000] usbcore: registered new interface driver usbserial
[ 38.180000] usbcore: registered new interface driver usbserial_generic
[ 38.180000] usbserial: USB Serial support registered for generic
[ 38.330000] usbcore: registered new interface driver cdc_ether
[ 38.440000] Error: Driver 'gpio-keys-polled' is already registered, aborting...
[ 38.570000] usbcore: registered new interface driver rndis_host
[ 38.710000] scsi 3:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 38.710000] sd 3:0:0:0: Attached scsi generic sg0 type 0
[ 38.720000] sd 3:0:0:0: [sda] Attached SCSI removable disk
[ 38.730000] scsi 2:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 38.740000] scsi 2:0:0:0: Attached scsi generic sg1 type 5
[ 42.540000] usb 1-1: USB disconnect, device number 3
[ 45.190000] device eth0 entered promiscuous mode
[ 46.710000] usb 1-1: new high-speed USB device number 4 using ehci-platform
[ 46.860000] cdc_ether 1-1:1.1 wwan0: register 'cdc_ether' at usb-ehci-platform-1, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 46.880000] scsi8 : usb-storage 1-1:1.5
[ 46.880000] scsi9 : usb-storage 1-1:1.6
[ 47.880000] scsi 8:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 47.890000] scsi 8:0:0:0: Attached scsi generic sg0 type 5
[ 47.890000] scsi 9:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 47.900000] sd 9:0:0:0: Attached scsi generic sg1 type 0
[ 47.910000] sd 9:0:0:0: [sda] Attached SCSI removable disk
[ 51.170000] device wlan0 entered promiscuous mode
[ 51.250000] br-lan: port 2(wlan0) entered forwarding state
[ 51.250000] br-lan: port 2(wlan0) entered forwarding state
[ 53.250000] br-lan: port 2(wlan0) entered forwarding state
[ 61.860000] device wlan0 left promiscuous mode
[ 61.860000] br-lan: port 2(wlan0) entered disabled state
[ 62.980000] device wlan0 entered promiscuous mode
[ 63.060000] br-lan: port 2(wlan0) entered forwarding state
[ 63.060000] br-lan: port 2(wlan0) entered forwarding state
[ 65.060000] br-lan: port 2(wlan0) entered forwarding state
[ 77.900000] usb 1-1: USB disconnect, device number 4
[ 77.910000] cdc_ether 1-1:1.1 wwan0: unregister 'cdc_ether' usb-ehci-platform-1, Mobile Broadband Network Device
[ 77.950000] usbserial: USB Serial deregistering driver generic
[ 77.960000] usbcore: deregistering interface driver usbserial_generic
[ 77.960000] usbcore: deregistering interface driver usbserial
[ 78.170000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 78.450000] usb 1-1: new high-speed USB device number 6 using ehci-platform
[ 78.610000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 78.890000] usb 1-1: new high-speed USB device number 7 using ehci-platform
[ 79.050000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 79.330000] usb 1-1: new high-speed USB device number 8 using ehci-platform
[ 79.490000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 79.710000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 79.990000] usb 1-1: new high-speed USB device number 10 using ehci-platform
[ 80.150000] cdc_ether 1-1:1.1 wwan0: register 'cdc_ether' at usb-ehci-platform-1, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 80.170000] scsi14 : usb-storage 1-1:1.5
[ 80.170000] scsi15 : usb-storage 1-1:1.6
[ 80.170000] usb 1-1: USB disconnect, device number 10
[ 80.180000] cdc_ether 1-1:1.1 wwan0: unregister 'cdc_ether' usb-ehci-platform-1, Mobile Broadband Network Device
[ 80.470000] usb 1-1: new high-speed USB device number 11 using ehci-platform
[ 80.630000] cdc_ether 1-1:1.1 wwan0: register 'cdc_ether' at usb-ehci-platform-1, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 80.670000] scsi20 : usb-storage 1-1:1.5
[ 80.720000] scsi21 : usb-storage 1-1:1.6
[ 80.720000] usb 1-1: USB disconnect, device number 11
[ 80.730000] cdc_ether 1-1:1.1 wwan0: unregister 'cdc_ether' usb-ehci-platform-1, Mobile Broadband Network Device
[ 80.970000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 81.020000] usbcore: registered new interface driver usbserial
[ 81.020000] usbcore: registered new interface driver usbserial_generic
[ 81.030000] usbserial: USB Serial support registered for generic
[ 81.250000] usb 1-1: new high-speed USB device number 13 using ehci-platform
[ 81.410000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 81.690000] usb 1-1: new high-speed USB device number 14 using ehci-platform
[ 81.840000] usbserial_generic 1-1:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 81.850000] usbserial_generic 1-1:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 81.860000] usbserial_generic 1-1:1.0: generic converter detected
[ 81.870000] usb 1-1: generic converter now attached to ttyUSB0
[ 81.880000] cdc_ether 1-1:1.1 wwan0: register 'cdc_ether' at usb-ehci-platform-1, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 81.900000] usbserial_generic 1-1:1.3: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 81.910000] usbserial_generic 1-1:1.3: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 81.910000] usbserial_generic 1-1:1.3: generic converter detected
[ 81.920000] usb 1-1: generic converter now attached to ttyUSB1
[ 81.940000] usbserial_generic 1-1:1.4: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 81.940000] usbserial_generic 1-1:1.4: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 81.950000] usbserial_generic 1-1:1.4: generic converter detected
[ 81.960000] usb 1-1: generic converter now attached to ttyUSB2
[ 81.990000] scsi26 : usb-storage 1-1:1.5
[ 81.990000] scsi27 : usb-storage 1-1:1.6
[ 82.960000] usb 1-1: USB disconnect, device number 14
[ 82.960000] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 82.970000] usbserial_generic 1-1:1.0: device disconnected
[ 82.970000] cdc_ether 1-1:1.1 wwan0: unregister 'cdc_ether' usb-ehci-platform-1, Mobile Broadband Network Device
[ 82.990000] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 83.000000] usbserial_generic 1-1:1.3: device disconnected
[ 83.000000] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[ 83.010000] usbserial_generic 1-1:1.4: device disconnected
[ 83.340000] usb 1-1: new high-speed USB device number 15 using ehci-platform
[ 83.500000] usbserial_generic 1-1:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 83.510000] usbserial_generic 1-1:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 83.520000] usbserial_generic 1-1:1.0: generic converter detected
[ 83.520000] usb 1-1: generic converter now attached to ttyUSB0
[ 83.580000] cdc_ether: probe of 1-1:1.1 failed with error -71
[ 83.580000] usbserial_generic 1-1:1.1: Generic device with no bulk out, not allowed.
[ 83.590000] usbserial_generic: probe of 1-1:1.1 failed with error -5
[ 83.610000] usbserial_generic 1-1:1.2: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 83.610000] usbserial_generic 1-1:1.2: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 83.620000] usbserial_generic 1-1:1.2: generic converter detected
[ 83.630000] usb 1-1: generic converter now attached to ttyUSB1
[ 83.650000] usbserial_generic 1-1:1.3: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 83.650000] usbserial_generic 1-1:1.3: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 83.660000] usbserial_generic 1-1:1.3: generic converter detected
[ 83.670000] usb 1-1: generic converter now attached to ttyUSB2
[ 83.680000] usbserial_generic 1-1:1.4: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 83.690000] usbserial_generic 1-1:1.4: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 83.700000] usbserial_generic 1-1:1.4: generic converter detected
[ 83.710000] usb 1-1: generic converter now attached to ttyUSB3
[ 83.750000] scsi33 : usb-storage 1-1:1.5
[ 83.780000] scsi34 : usb-storage 1-1:1.6
[ 83.790000] usb 1-1: USB disconnect, device number 15
[ 83.790000] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 83.800000] usbserial_generic 1-1:1.0: device disconnected
[ 83.800000] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 83.810000] usbserial_generic 1-1:1.2: device disconnected
[ 83.820000] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[ 83.820000] usbserial_generic 1-1:1.3: device disconnected
[ 83.830000] generic ttyUSB3: generic converter now disconnected from ttyUSB3
[ 83.840000] usbserial_generic 1-1:1.4: device disconnected
[ 84.070000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 84.350000] usb 1-1: new high-speed USB device number 17 using ehci-platform
[ 84.510000] usbserial_generic 1-1:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 84.510000] usbserial_generic 1-1:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 84.520000] usbserial_generic 1-1:1.0: generic converter detected
[ 84.530000] usb 1-1: generic converter now attached to ttyUSB0
[ 84.610000] cdc_ether: probe of 1-1:1.1 failed with error -71
[ 84.610000] usbserial_generic 1-1:1.1: Generic device with no bulk out, not allowed.
[ 84.620000] usbserial_generic: probe of 1-1:1.1 failed with error -5
[ 84.640000] usbserial_generic 1-1:1.2: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 84.650000] usbserial_generic 1-1:1.2: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 84.650000] usbserial_generic 1-1:1.2: generic converter detected
[ 84.660000] usb 1-1: generic converter now attached to ttyUSB1
[ 84.680000] usbserial_generic 1-1:1.3: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 84.680000] usbserial_generic 1-1:1.3: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 84.690000] usbserial_generic 1-1:1.3: generic converter detected
[ 84.700000] usb 1-1: generic converter now attached to ttyUSB2
[ 84.720000] usbserial_generic 1-1:1.4: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 84.720000] usbserial_generic 1-1:1.4: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 84.730000] usbserial_generic 1-1:1.4: generic converter detected
[ 84.740000] usb 1-1: generic converter now attached to ttyUSB3
[ 84.810000] scsi40 : usb-storage 1-1:1.5
[ 84.840000] scsi41 : usb-storage 1-1:1.6
[ 84.840000] usb 1-1: USB disconnect, device number 17
[ 84.850000] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 84.860000] usbserial_generic 1-1:1.0: device disconnected
[ 84.860000] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 84.870000] usbserial_generic 1-1:1.2: device disconnected
[ 84.870000] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[ 84.880000] usbserial_generic 1-1:1.3: device disconnected
[ 84.890000] generic ttyUSB3: generic converter now disconnected from ttyUSB3
[ 84.890000] usbserial_generic 1-1:1.4: device disconnected
[ 85.190000] usb 1-1: new high-speed USB device number 18 using ehci-platform
[ 85.350000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 85.630000] usb 1-1: new high-speed USB device number 19 using ehci-platform
[ 85.780000] usbserial_generic 1-1:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 85.790000] usbserial_generic 1-1:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 85.800000] usbserial_generic 1-1:1.0: generic converter detected
[ 85.810000] usb 1-1: generic converter now attached to ttyUSB0
[ 85.820000] cdc_ether 1-1:1.1 wwan0: register 'cdc_ether' at usb-ehci-platform-1, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 85.840000] usbserial_generic 1-1:1.3: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 85.850000] usbserial_generic 1-1:1.3: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 85.860000] usbserial_generic 1-1:1.3: generic converter detected
[ 85.860000] usb 1-1: generic converter now attached to ttyUSB1
[ 85.890000] usbserial_generic 1-1:1.4: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 85.900000] usbserial_generic 1-1:1.4: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 85.900000] usbserial_generic 1-1:1.4: generic converter detected
[ 85.910000] usb 1-1: generic converter now attached to ttyUSB2
[ 85.940000] scsi46 : usb-storage 1-1:1.5
[ 85.940000] scsi47 : usb-storage 1-1:1.6
[ 86.940000] scsi 46:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 86.940000] scsi 46:0:0:0: Attached scsi generic sg0 type 5
[ 86.950000] scsi 47:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 86.960000] sd 47:0:0:0: Attached scsi generic sg1 type 0
[ 86.970000] sd 47:0:0:0: [sda] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[ 86.970000] sd 47:0:0:0: [sda] Write Protect is off
[ 86.980000] sd 47:0:0:0: [sda] Mode Sense: 0f 0e 00 00
[ 86.990000] sd 47:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 87.010000] sda: sda1 sda2
[ 87.010000] sd 47:0:0:0: [sda] Attached SCSI removable disk
[ 101.840000] EXT4-fs (sda1): recovery complete
[ 101.840000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 102.220000] Adding 2097148k swap on /dev/sda2. Priority:-1 extents:1 across:2097148k
[ 107.180000] usb 1-1: USB disconnect, device number 19
[ 107.180000] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 107.190000] usbserial_generic 1-1:1.0: device disconnected
[ 107.190000] cdc_ether 1-1:1.1 wwan0: unregister 'cdc_ether' usb-ehci-platform-1, Mobile Broadband Network Device
[ 107.220000] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 107.220000] usbserial_generic 1-1:1.3: device disconnected
[ 107.230000] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[ 107.240000] usbserial_generic 1-1:1.4: device disconnected
[ 107.260000] sd 47:0:0:0: [sda] Synchronizing SCSI cache
[ 107.260000] sd 47:0:0:0: [sda]
[ 107.260000] Result: hostbyte=0x01 driverbyte=0x00
[ 107.560000] usb 1-1: new high-speed USB device number 20 using ehci-platform
[ 107.720000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 108.000000] usb 1-1: new high-speed USB device number 21 using ehci-platform
[ 108.160000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 108.440000] usb 1-1: new high-speed USB device number 22 using ehci-platform
[ 108.600000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 108.880000] usb 1-1: new high-speed USB device number 23 using ehci-platform
[ 109.040000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 109.320000] usb 1-1: new high-speed USB device number 24 using ehci-platform
[ 109.480000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 109.700000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 109.980000] usb 1-1: new high-speed USB device number 26 using ehci-platform
[ 110.580000] usb 1-1: device not accepting address 26, error -71
[ 110.640000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 110.920000] usb 1-1: new high-speed USB device number 28 using ehci-platform
[ 111.070000] usbserial_generic 1-1:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 111.080000] usbserial_generic 1-1:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 111.090000] usbserial_generic 1-1:1.0: generic converter detected
[ 111.100000] usb 1-1: generic converter now attached to ttyUSB0
[ 111.110000] cdc_ether 1-1:1.1 wwan0: register 'cdc_ether' at usb-ehci-platform-1, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 111.130000] usbserial_generic 1-1:1.3: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 111.140000] usbserial_generic 1-1:1.3: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 111.140000] usbserial_generic 1-1:1.3: generic converter detected
[ 111.150000] usb 1-1: generic converter now attached to ttyUSB1
[ 111.170000] usbserial_generic 1-1:1.4: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 111.170000] usbserial_generic 1-1:1.4: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 111.180000] usbserial_generic 1-1:1.4: generic converter detected
[ 111.190000] usb 1-1: generic converter now attached to ttyUSB2
[ 111.220000] scsi52 : usb-storage 1-1:1.5
[ 111.220000] scsi53 : usb-storage 1-1:1.6
[ 112.220000] scsi 52:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 112.220000] scsi 52:0:0:0: Attached scsi generic sg0 type 5
[ 112.230000] scsi 53:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 112.240000] sd 53:0:0:0: Attached scsi generic sg1 type 0
[ 112.250000] sd 53:0:0:0: [sdb] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[ 112.250000] sd 53:0:0:0: [sdb] Write Protect is off
[ 112.260000] sd 53:0:0:0: [sdb] Mode Sense: 0f 0e 00 00
[ 112.270000] sd 53:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 112.290000] sdb: sdb1 sdb2
[ 112.310000] sd 53:0:0:0: [sdb] Attached SCSI removable disk
[ 113.860000] EXT4-fs (sdb1): couldn't mount as ext3 due to feature incompatibilities
[ 113.880000] EXT4-fs (sdb1): couldn't mount as ext2 due to feature incompatibilities
[ 113.930000] EXT4-fs (sdb1): recovery complete
[ 113.930000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 114.180000] Adding 2097148k swap on /dev/sdb2. Priority:-2 extents:1 across:2097148k
[ 127.980000] usb 1-1: USB disconnect, device number 28
[ 127.980000] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 127.990000] usbserial_generic 1-1:1.0: device disconnected
[ 128.000000] cdc_ether 1-1:1.1 wwan0: unregister 'cdc_ether' usb-ehci-platform-1, Mobile Broadband Network Device
[ 128.020000] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 128.020000] usbserial_generic 1-1:1.3: device disconnected
[ 128.030000] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[ 128.030000] usbserial_generic 1-1:1.4: device disconnected
[ 128.040000] sd 53:0:0:0: [sdb] Synchronizing SCSI cache
[ 128.060000] sd 53:0:0:0: [sdb]
[ 128.060000] Result: hostbyte=0x01 driverbyte=0x00
[ 128.280000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 128.560000] usb 1-1: new high-speed USB device number 30 using ehci-platform
[ 128.720000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 129.000000] usb 1-1: new high-speed USB device number 31 using ehci-platform
[ 129.160000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 129.380000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 129.660000] usb 1-1: new high-speed USB device number 33 using ehci-platform
[ 129.820000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 130.100000] usb 1-1: new high-speed USB device number 34 using ehci-platform
[ 130.260000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 130.540000] usb 1-1: new high-speed USB device number 35 using ehci-platform
[ 130.690000] usbserial_generic 1-1:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 130.700000] usbserial_generic 1-1:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 130.710000] usbserial_generic 1-1:1.0: generic converter detected
[ 130.720000] usb 1-1: generic converter now attached to ttyUSB0
[ 130.740000] cdc_ether 1-1:1.1 wwan0: register 'cdc_ether' at usb-ehci-platform-1, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 130.760000] usbserial_generic 1-1:1.3: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 130.760000] usbserial_generic 1-1:1.3: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 130.770000] usbserial_generic 1-1:1.3: generic converter detected
[ 130.780000] usb 1-1: generic converter now attached to ttyUSB1
[ 130.810000] usbserial_generic 1-1:1.4: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 130.820000] usbserial_generic 1-1:1.4: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 130.820000] usbserial_generic 1-1:1.4: generic converter detected
[ 130.830000] usb 1-1: generic converter now attached to ttyUSB2
[ 130.860000] scsi58 : usb-storage 1-1:1.5
[ 130.870000] scsi59 : usb-storage 1-1:1.6
[ 131.860000] scsi 58:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 131.860000] scsi 58:0:0:0: Attached scsi generic sg0 type 5
[ 131.870000] scsi 59:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 131.880000] sd 59:0:0:0: Attached scsi generic sg1 type 0
[ 131.890000] sd 59:0:0:0: [sdc] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[ 131.910000] sd 59:0:0:0: [sdc] Write Protect is off
[ 131.910000] sd 59:0:0:0: [sdc] Mode Sense: 0f 0e 00 00
[ 131.910000] sd 59:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 131.930000] sdc: sdc1 sdc2
[ 131.940000] sd 59:0:0:0: [sdc] Attached SCSI removable disk
[ 133.200000] EXT4-fs (sdc1): couldn't mount as ext3 due to feature incompatibilities
[ 133.210000] EXT4-fs (sdc1): couldn't mount as ext2 due to feature incompatibilities
[ 133.270000] EXT4-fs (sdc1): recovery complete
[ 133.270000] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 133.540000] Adding 2097148k swap on /dev/sdc2. Priority:-3 extents:1 across:2097148k
[ 138.180000] usb 1-1: USB disconnect, device number 35
[ 138.190000] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 138.190000] usbserial_generic 1-1:1.0: device disconnected
[ 138.200000] cdc_ether 1-1:1.1 wwan0: unregister 'cdc_ether' usb-ehci-platform-1, Mobile Broadband Network Device
[ 138.230000] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 138.230000] usbserial_generic 1-1:1.3: device disconnected
[ 138.240000] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[ 138.240000] usbserial_generic 1-1:1.4: device disconnected
[ 138.260000] sd 59:0:0:0: [sdc] Synchronizing SCSI cache
[ 138.260000] sd 59:0:0:0: [sdc]
[ 138.260000] Result: hostbyte=0x01 driverbyte=0x00
[ 138.550000] usb 1-1: new high-speed USB device number 36 using ehci-platform
[ 138.710000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 138.990000] usb 1-1: new high-speed USB device number 37 using ehci-platform
[ 139.230000] usb 1-1: device descriptor read/all, error -71
[ 139.300000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 139.580000] usb 1-1: new high-speed USB device number 39 using ehci-platform
[ 139.740000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 140.020000] usb 1-1: new high-speed USB device number 40 using ehci-platform
[ 140.180000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 140.460000] usb 1-1: new high-speed USB device number 41 using ehci-platform
[ 140.620000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 140.900000] usb 1-1: new high-speed USB device number 42 using ehci-platform
[ 141.500000] usb 1-1: device not accepting address 42, error -71
[ 141.560000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 141.840000] usb 1-1: new high-speed USB device number 44 using ehci-platform
[ 141.990000] usbserial_generic 1-1:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 142.000000] usbserial_generic 1-1:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 142.010000] usbserial_generic 1-1:1.0: generic converter detected
[ 142.020000] usb 1-1: generic converter now attached to ttyUSB0
[ 142.030000] cdc_ether 1-1:1.1 wwan0: register 'cdc_ether' at usb-ehci-platform-1, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 142.050000] usbserial_generic 1-1:1.3: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 142.060000] usbserial_generic 1-1:1.3: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 142.060000] usbserial_generic 1-1:1.3: generic converter detected
[ 142.070000] usb 1-1: generic converter now attached to ttyUSB1
[ 142.090000] usbserial_generic 1-1:1.4: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 142.090000] usbserial_generic 1-1:1.4: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 142.100000] usbserial_generic 1-1:1.4: generic converter detected
[ 142.110000] usb 1-1: generic converter now attached to ttyUSB2
[ 142.130000] scsi64 : usb-storage 1-1:1.5
[ 142.130000] scsi65 : usb-storage 1-1:1.6
[ 143.130000] scsi 64:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 143.130000] scsi 64:0:0:0: Attached scsi generic sg0 type 5
[ 143.140000] scsi 65:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 143.150000] sd 65:0:0:0: Attached scsi generic sg1 type 0
[ 143.160000] sd 65:0:0:0: [sdd] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[ 143.160000] sd 65:0:0:0: [sdd] Write Protect is off
[ 143.170000] sd 65:0:0:0: [sdd] Mode Sense: 0f 0e 00 00
[ 143.180000] sd 65:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 143.200000] sdd: sdd1 sdd2
[ 143.210000] sd 65:0:0:0: [sdd] Attached SCSI removable disk
[ 144.800000] EXT4-fs (sdd1): couldn't mount as ext3 due to feature incompatibilities
[ 144.820000] EXT4-fs (sdd1): couldn't mount as ext2 due to feature incompatibilities
[ 144.870000] EXT4-fs (sdd1): recovery complete
[ 144.870000] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[ 145.130000] Adding 2097148k swap on /dev/sdd2. Priority:-4 extents:1 across:2097148k
[ 159.160000] usb 1-1: USB disconnect, device number 44
[ 159.160000] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 159.170000] usbserial_generic 1-1:1.0: device disconnected
[ 159.170000] cdc_ether 1-1:1.1 wwan0: unregister 'cdc_ether' usb-ehci-platform-1, Mobile Broadband Network Device
[ 159.200000] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 159.210000] usbserial_generic 1-1:1.3: device disconnected
[ 159.210000] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[ 159.220000] usbserial_generic 1-1:1.4: device disconnected
[ 159.240000] sd 65:0:0:0: [sdd] Synchronizing SCSI cache
[ 159.240000] sd 65:0:0:0: [sdd]
[ 159.240000] Result: hostbyte=0x01 driverbyte=0x00
[ 159.480000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 159.760000] usb 1-1: new high-speed USB device number 46 using ehci-platform
[ 159.920000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 160.200000] usb 1-1: new high-speed USB device number 47 using ehci-platform
[ 160.360000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 160.640000] usb 1-1: new high-speed USB device number 48 using ehci-platform
[ 160.800000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 161.080000] usb 1-1: new high-speed USB device number 49 using ehci-platform
[ 161.240000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 161.520000] usb 1-1: new high-speed USB device number 50 using ehci-platform
[ 161.680000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 161.960000] usb 1-1: new high-speed USB device number 51 using ehci-platform
[ 162.110000] usbserial_generic 1-1:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 162.120000] usbserial_generic 1-1:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 162.130000] usbserial_generic 1-1:1.0: generic converter detected
[ 162.140000] usb 1-1: generic converter now attached to ttyUSB0
[ 162.150000] cdc_ether 1-1:1.1 wwan0: register 'cdc_ether' at usb-ehci-platform-1, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 162.170000] usbserial_generic 1-1:1.3: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 162.180000] usbserial_generic 1-1:1.3: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 162.180000] usbserial_generic 1-1:1.3: generic converter detected
[ 162.190000] usb 1-1: generic converter now attached to ttyUSB1
[ 162.210000] usbserial_generic 1-1:1.4: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 162.210000] usbserial_generic 1-1:1.4: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 162.220000] usbserial_generic 1-1:1.4: generic converter detected
[ 162.230000] usb 1-1: generic converter now attached to ttyUSB2
[ 162.250000] scsi70 : usb-storage 1-1:1.5
[ 162.250000] scsi71 : usb-storage 1-1:1.6
[ 163.250000] scsi 70:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 163.250000] scsi 70:0:0:0: Attached scsi generic sg0 type 5
[ 163.260000] scsi 71:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 163.270000] sd 71:0:0:0: Attached scsi generic sg1 type 0
[ 163.280000] sd 71:0:0:0: [sde] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[ 163.300000] sd 71:0:0:0: [sde] Write Protect is off
[ 163.300000] sd 71:0:0:0: [sde] Mode Sense: 0f 0e 00 00
[ 163.300000] sd 71:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 163.320000] sde: sde1 sde2
[ 163.330000] sd 71:0:0:0: [sde] Attached SCSI removable disk
[ 164.590000] EXT4-fs (sde1): couldn't mount as ext3 due to feature incompatibilities
[ 164.600000] EXT4-fs (sde1): couldn't mount as ext2 due to feature incompatibilities
[ 164.660000] EXT4-fs (sde1): recovery complete
[ 164.660000] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
[ 164.910000] Adding 2097148k swap on /dev/sde2. Priority:-5 extents:1 across:2097148k
[ 170.190000] usb 1-1: USB disconnect, device number 51
[ 170.200000] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 170.200000] usbserial_generic 1-1:1.0: device disconnected
[ 170.210000] cdc_ether 1-1:1.1 wwan0: unregister 'cdc_ether' usb-ehci-platform-1, Mobile Broadband Network Device
[ 170.230000] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 170.230000] usbserial_generic 1-1:1.3: device disconnected
[ 170.240000] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[ 170.250000] usbserial_generic 1-1:1.4: device disconnected
[ 170.250000] sd 71:0:0:0: [sde] Synchronizing SCSI cache
[ 170.270000] sd 71:0:0:0: [sde]
[ 170.270000] Result: hostbyte=0x01 driverbyte=0x00
[ 170.550000] usb 1-1: new high-speed USB device number 52 using ehci-platform
[ 170.710000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 172.050000] Write-error on swap-device (8:0:8)
[ 174.510000] usb 1-1: new high-speed USB device number 53 using ehci-platform
[ 174.670000] scsi72 : usb-storage 1-1:1.0
[ 174.670000] scsi73 : usb-storage 1-1:1.1
[ 175.270000] usb 1-1: USB disconnect, device number 53
[ 179.440000] usb 1-1: new high-speed USB device number 54 using ehci-platform
[ 179.590000] usbserial_generic 1-1:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 179.600000] usbserial_generic 1-1:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 179.610000] usbserial_generic 1-1:1.0: generic converter detected
[ 179.620000] usb 1-1: generic converter now attached to ttyUSB0
[ 179.630000] cdc_ether 1-1:1.1 wwan0: register 'cdc_ether' at usb-ehci-platform-1, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 179.640000] usbserial_generic 1-1:1.3: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 179.650000] usbserial_generic 1-1:1.3: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 179.660000] usbserial_generic 1-1:1.3: generic converter detected
[ 179.670000] usb 1-1: generic converter now attached to ttyUSB1
[ 179.680000] usbserial_generic 1-1:1.4: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 179.690000] usbserial_generic 1-1:1.4: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 179.700000] usbserial_generic 1-1:1.4: generic converter detected
[ 179.700000] usb 1-1: generic converter now attached to ttyUSB2
[ 179.710000] scsi78 : usb-storage 1-1:1.5
[ 179.710000] scsi79 : usb-storage 1-1:1.6
[ 180.710000] scsi 78:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 180.710000] scsi 78:0:0:0: Attached scsi generic sg0 type 5
[ 180.720000] scsi 79:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 180.730000] sd 79:0:0:0: Attached scsi generic sg1 type 0
[ 180.740000] sd 79:0:0:0: [sdf] Attached SCSI removable disk
[ 186.060000] Write-error on swap-device (8:0:16)
[ 208.530000] usb 1-1: USB disconnect, device number 54
[ 208.530000] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 208.540000] usbserial_generic 1-1:1.0: device disconnected
[ 208.540000] cdc_ether 1-1:1.1 wwan0: unregister 'cdc_ether' usb-ehci-platform-1, Mobile Broadband Network Device
[ 208.570000] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 208.570000] usbserial_generic 1-1:1.3: device disconnected
[ 208.580000] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[ 208.580000] usbserial_generic 1-1:1.4: device disconnected
[ 208.880000] usb 1-1: new high-speed USB device number 55 using ehci-platform
[ 209.040000] usbserial_generic 1-1:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 209.040000] usbserial_generic 1-1:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 209.050000] usbserial_generic 1-1:1.0: generic converter detected
[ 209.060000] usb 1-1: generic converter now attached to ttyUSB0
[ 209.100000] cdc_ether: probe of 1-1:1.1 failed with error -71
[ 209.100000] usbserial_generic 1-1:1.1: Generic device with no bulk out, not allowed.
[ 209.110000] usbserial_generic: probe of 1-1:1.1 failed with error -5
[ 209.130000] usbserial_generic 1-1:1.2: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 209.130000] usbserial_generic 1-1:1.2: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 209.140000] usbserial_generic 1-1:1.2: generic converter detected
[ 209.150000] usb 1-1: generic converter now attached to ttyUSB1
[ 209.170000] usbserial_generic 1-1:1.3: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 209.170000] usbserial_generic 1-1:1.3: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 209.180000] usbserial_generic 1-1:1.3: generic converter detected
[ 209.190000] usb 1-1: generic converter now attached to ttyUSB2
[ 209.200000] usbserial_generic 1-1:1.4: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 209.210000] usbserial_generic 1-1:1.4: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 209.220000] usbserial_generic 1-1:1.4: generic converter detected
[ 209.220000] usb 1-1: generic converter now attached to ttyUSB3
[ 209.280000] scsi85 : usb-storage 1-1:1.5
[ 209.310000] scsi86 : usb-storage 1-1:1.6
[ 209.320000] usb 1-1: USB disconnect, device number 55
[ 209.320000] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 209.330000] usbserial_generic 1-1:1.0: device disconnected
[ 209.330000] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 209.340000] usbserial_generic 1-1:1.2: device disconnected
[ 209.350000] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[ 209.350000] usbserial_generic 1-1:1.3: device disconnected
[ 209.360000] generic ttyUSB3: generic converter now disconnected from ttyUSB3
[ 209.370000] usbserial_generic 1-1:1.4: device disconnected
[ 209.660000] usb 1-1: new high-speed USB device number 56 using ehci-platform
[ 209.820000] usbserial_generic 1-1:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 209.820000] usbserial_generic 1-1:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 209.830000] usbserial_generic 1-1:1.0: generic converter detected
[ 209.840000] usb 1-1: generic converter now attached to ttyUSB0
[ 209.860000] cdc_ether 1-1:1.1 wwan0: register 'cdc_ether' at usb-ehci-platform-1, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 209.870000] usbserial_generic 1-1:1.3: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 209.880000] usbserial_generic 1-1:1.3: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 209.890000] usbserial_generic 1-1:1.3: generic converter detected
[ 209.900000] usb 1-1: generic converter now attached to ttyUSB1
[ 209.920000] usbserial_generic 1-1:1.4: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 209.930000] usbserial_generic 1-1:1.4: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 209.940000] usbserial_generic 1-1:1.4: generic converter detected
[ 209.950000] usb 1-1: generic converter now attached to ttyUSB2
[ 209.970000] scsi91 : usb-storage 1-1:1.5
[ 209.990000] scsi92 : usb-storage 1-1:1.6
[ 210.980000] scsi 91:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 210.980000] scsi 91:0:0:0: Attached scsi generic sg0 type 5
[ 210.990000] scsi 92:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 211.000000] sd 92:0:0:0: Attached scsi generic sg1 type 0
[ 211.010000] sd 92:0:0:0: [sdf] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[ 211.010000] sd 92:0:0:0: [sdf] Write Protect is off
[ 211.020000] sd 92:0:0:0: [sdf] Mode Sense: 0f 0e 00 00
[ 211.030000] sd 92:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 211.050000] sdf: sdf1 sdf2
[ 211.060000] sd 92:0:0:0: [sdf] Attached SCSI removable disk
[ 216.060000] usb 1-1: USB disconnect, device number 56
[ 216.070000] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 216.070000] usbserial_generic 1-1:1.0: device disconnected
[ 216.080000] cdc_ether 1-1:1.1 wwan0: unregister 'cdc_ether' usb-ehci-platform-1, Mobile Broadband Network Device
[ 216.110000] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 216.110000] usbserial_generic 1-1:1.3: device disconnected
[ 216.120000] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[ 216.120000] usbserial_generic 1-1:1.4: device disconnected
[ 216.130000] sd 92:0:0:0: [sdf] Synchronizing SCSI cache
[ 216.160000] sd 92:0:0:0: [sdf]
[ 216.160000] Result: hostbyte=0x01 driverbyte=0x00
[ 216.440000] usb 1-1: new high-speed USB device number 57 using ehci-platform
[ 216.680000] usb 1-1: device descriptor read/all, error -71
[ 216.750000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 217.030000] usb 1-1: new high-speed USB device number 59 using ehci-platform
[ 217.090000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 217.370000] usb 1-1: new high-speed USB device number 60 using ehci-platform
[ 217.610000] usb 1-1: device descriptor read/all, error -71
[ 217.680000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 217.960000] usb 1-1: new high-speed USB device number 62 using ehci-platform
[ 218.120000] usbserial_generic 1-1:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 218.120000] usbserial_generic 1-1:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 218.130000] usbserial_generic 1-1:1.0: generic converter detected
[ 218.140000] usb 1-1: generic converter now attached to ttyUSB0
[ 218.180000] cdc_ether: probe of 1-1:1.1 failed with error -71
[ 218.180000] usbserial_generic 1-1:1.1: Generic device with no bulk out, not allowed.
[ 218.190000] usbserial_generic: probe of 1-1:1.1 failed with error -5
[ 218.210000] usbserial_generic 1-1:1.2: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 218.210000] usbserial_generic 1-1:1.2: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 218.220000] usbserial_generic 1-1:1.2: generic converter detected
[ 218.230000] usb 1-1: generic converter now attached to ttyUSB1
[ 218.240000] usbserial_generic 1-1:1.3: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 218.250000] usbserial_generic 1-1:1.3: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 218.260000] usbserial_generic 1-1:1.3: generic converter detected
[ 218.260000] usb 1-1: generic converter now attached to ttyUSB2
[ 218.280000] usbserial_generic 1-1:1.4: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 218.280000] usbserial_generic 1-1:1.4: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 218.290000] usbserial_generic 1-1:1.4: generic converter detected
[ 218.300000] usb 1-1: generic converter now attached to ttyUSB3
[ 218.360000] scsi98 : usb-storage 1-1:1.5
[ 218.400000] scsi99 : usb-storage 1-1:1.6
[ 218.400000] usb 1-1: USB disconnect, device number 62
[ 218.410000] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 218.410000] usbserial_generic 1-1:1.0: device disconnected
[ 218.420000] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 218.430000] usbserial_generic 1-1:1.2: device disconnected
[ 218.430000] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[ 218.440000] usbserial_generic 1-1:1.3: device disconnected
[ 218.440000] generic ttyUSB3: generic converter now disconnected from ttyUSB3
[ 218.450000] usbserial_generic 1-1:1.4: device disconnected
[ 218.690000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 218.970000] usb 1-1: new high-speed USB device number 64 using ehci-platform
[ 219.130000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 219.410000] usb 1-1: new high-speed USB device number 65 using ehci-platform
[ 219.570000] usbserial_generic 1-1:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 219.570000] usbserial_generic 1-1:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 219.580000] usbserial_generic 1-1:1.0: generic converter detected
[ 219.590000] usb 1-1: generic converter now attached to ttyUSB0
[ 219.610000] cdc_ether 1-1:1.1 wwan0: register 'cdc_ether' at usb-ehci-platform-1, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 219.630000] usbserial_generic 1-1:1.3: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 219.630000] usbserial_generic 1-1:1.3: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 219.640000] usbserial_generic 1-1:1.3: generic converter detected
[ 219.650000] usb 1-1: generic converter now attached to ttyUSB1
[ 219.670000] usbserial_generic 1-1:1.4: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 219.670000] usbserial_generic 1-1:1.4: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 219.680000] usbserial_generic 1-1:1.4: generic converter detected
[ 219.690000] usb 1-1: generic converter now attached to ttyUSB2
[ 219.720000] scsi104 : usb-storage 1-1:1.5
[ 219.720000] scsi105 : usb-storage 1-1:1.6
[ 220.720000] scsi 104:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 220.730000] scsi 104:0:0:0: Attached scsi generic sg0 type 5
[ 220.730000] scsi 105:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 220.740000] sd 105:0:0:0: Attached scsi generic sg1 type 0
[ 220.750000] sd 105:0:0:0: [sdf] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[ 220.770000] sd 105:0:0:0: [sdf] Write Protect is off
[ 220.770000] sd 105:0:0:0: [sdf] Mode Sense: 0f 0e 00 00
[ 220.770000] sd 105:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 220.790000] sdf: sdf1 sdf2
[ 220.800000] usb 1-1: USB disconnect, device number 65
[ 220.800000] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 220.810000] usbserial_generic 1-1:1.0: device disconnected
[ 220.820000] cdc_ether 1-1:1.1 wwan0: unregister 'cdc_ether' usb-ehci-platform-1, Mobile Broadband Network Device
[ 220.830000] sd 105:0:0:0: [sdf] Attached SCSI removable disk
[ 220.840000] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 220.840000] usbserial_generic 1-1:1.3: device disconnected
[ 220.850000] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[ 220.850000] usbserial_generic 1-1:1.4: device disconnected
[ 220.860000] sd 105:0:0:0: [sdf] Synchronizing SCSI cache
[ 220.870000] sd 105:0:0:0: [sdf]
[ 220.880000] Result: hostbyte=0x01 driverbyte=0x00
[ 221.180000] usb 1-1: new high-speed USB device number 66 using ehci-platform
[ 221.340000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 221.560000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 221.780000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 222.000000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 222.220000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 222.440000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 222.660000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 222.880000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 223.100000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 223.320000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 223.600000] usb 1-1: new high-speed USB device number 76 using ehci-platform
[ 224.200000] usb 1-1: device not accepting address 76, error -71
[ 224.260000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 224.480000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 224.760000] usb 1-1: new high-speed USB device number 79 using ehci-platform
[ 224.920000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 225.140000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 225.360000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 225.580000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 225.800000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 226.020000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 226.240000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 226.520000] usb 1-1: new high-speed USB device number 86 using ehci-platform
[ 226.680000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 226.960000] usb 1-1: new high-speed USB device number 87 using ehci-platform
[ 227.120000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 227.340000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 227.560000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 227.840000] usb 1-1: new high-speed USB device number 90 using ehci-platform
[ 228.000000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 228.220000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 228.440000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 228.660000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 228.880000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 229.100000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 229.380000] usb 1-1: new high-speed USB device number 96 using ehci-platform
[ 229.540000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 229.760000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 229.980000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 230.200000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 230.420000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 230.640000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 230.860000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 231.080000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 231.300000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 231.520000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 231.800000] usb 1-1: new high-speed USB device number 106 using ehci-platform
[ 231.960000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 232.240000] usb 1-1: new high-speed USB device number 107 using ehci-platform
[ 232.400000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 232.680000] usb 1-1: new high-speed USB device number 108 using ehci-platform
[ 232.840000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 233.060000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 233.280000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 233.560000] usb 1-1: new high-speed USB device number 111 using ehci-platform
[ 233.720000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 233.940000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 234.220000] usb 1-1: new high-speed USB device number 113 using ehci-platform
[ 234.380000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 234.660000] usb 1-1: new high-speed USB device number 114 using ehci-platform
[ 234.820000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 235.100000] usb 1-1: new high-speed USB device number 115 using ehci-platform
[ 235.700000] usb 1-1: device not accepting address 115, error -71
[ 235.760000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 235.980000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 236.200000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 236.420000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 236.640000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 236.860000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 237.080000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 237.300000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 237.520000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 237.740000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 238.020000] usb 1-1: new high-speed USB device number 126 using ehci-platform
[ 238.180000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 238.460000] usb 1-1: new high-speed USB device number 127 using ehci-platform
[ 238.620000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 238.900000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 239.060000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 239.340000] usb 1-1: new high-speed USB device number 3 using ehci-platform
[ 239.500000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 239.720000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 239.940000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 240.160000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 240.380000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 240.660000] usb 1-1: new high-speed USB device number 8 using ehci-platform
[ 240.820000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 241.040000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 241.260000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 241.480000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 241.700000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 241.920000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 242.200000] usb 1-1: new high-speed USB device number 14 using ehci-platform
[ 242.360000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 242.580000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 242.800000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 243.080000] usb 1-1: new high-speed USB device number 17 using ehci-platform
[ 243.240000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 243.520000] usb 1-1: new high-speed USB device number 18 using ehci-platform
[ 243.680000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 243.900000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 244.120000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 244.400000] usb 1-1: new high-speed USB device number 21 using ehci-platform
[ 244.560000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 244.840000] usb 1-1: new high-speed USB device number 22 using ehci-platform
[ 245.000000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 245.220000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 245.500000] usb 1-1: new high-speed USB device number 24 using ehci-platform
[ 245.660000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 245.940000] usb 1-1: new high-speed USB device number 25 using ehci-platform
[ 246.100000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 246.380000] usb 1-1: new high-speed USB device number 26 using ehci-platform
[ 246.540000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 246.760000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 246.980000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 247.200000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 247.420000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 247.700000] usb 1-1: new high-speed USB device number 31 using ehci-platform
[ 247.860000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 248.140000] usb 1-1: new high-speed USB device number 32 using ehci-platform
[ 248.300000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 248.520000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 248.800000] usb 1-1: new high-speed USB device number 34 using ehci-platform
[ 248.960000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 249.180000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 249.400000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 249.620000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 249.840000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 250.060000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 250.280000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 250.560000] usb 1-1: new high-speed USB device number 41 using ehci-platform
[ 250.720000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 251.000000] usb 1-1: new high-speed USB device number 42 using ehci-platform
[ 251.160000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 251.380000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 251.600000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 251.880000] usb 1-1: new high-speed USB device number 45 using ehci-platform
[ 252.040000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 252.320000] usb 1-1: new high-speed USB device number 46 using ehci-platform
[ 252.480000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 252.760000] usb 1-1: new high-speed USB device number 47 using ehci-platform
[ 252.920000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 253.200000] usb 1-1: new high-speed USB device number 48 using ehci-platform
[ 253.360000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 253.640000] usb 1-1: new high-speed USB device number 49 using ehci-platform
[ 254.240000] usb 1-1: device not accepting address 49, error -71
[ 254.300000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 254.520000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 254.800000] usb 1-1: new high-speed USB device number 52 using ehci-platform
[ 254.960000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 255.180000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 255.400000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 255.620000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 255.840000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 256.060000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 256.280000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 256.500000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 256.720000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 256.940000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 257.220000] usb 1-1: new high-speed USB device number 62 using ehci-platform
[ 257.380000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 257.660000] usb 1-1: new high-speed USB device number 63 using ehci-platform
[ 257.820000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 258.040000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 258.260000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 258.540000] usb 1-1: new high-speed USB device number 66 using ehci-platform
[ 258.700000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 258.920000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 259.140000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 259.360000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 259.580000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 259.800000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 260.080000] usb 1-1: new high-speed USB device number 72 using ehci-platform
[ 260.230000] usbserial_generic 1-1:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 260.240000] usbserial_generic 1-1:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 260.250000] usbserial_generic 1-1:1.0: generic converter detected
[ 260.260000] usb 1-1: generic converter now attached to ttyUSB0
[ 260.280000] cdc_ether 1-1:1.1 wwan0: register 'cdc_ether' at usb-ehci-platform-1, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 260.300000] usbserial_generic 1-1:1.3: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 260.310000] usbserial_generic 1-1:1.3: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 260.310000] usbserial_generic 1-1:1.3: generic converter detected
[ 260.320000] usb 1-1: generic converter now attached to ttyUSB1
[ 260.350000] usbserial_generic 1-1:1.4: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 260.360000] usbserial_generic 1-1:1.4: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 260.370000] usbserial_generic 1-1:1.4: generic converter detected
[ 260.370000] usb 1-1: generic converter now attached to ttyUSB2
[ 260.390000] scsi110 : usb-storage 1-1:1.5
[ 260.390000] scsi111 : usb-storage 1-1:1.6
[ 261.390000] scsi 110:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 261.390000] scsi 110:0:0:0: Attached scsi generic sg0 type 5
[ 261.400000] scsi 111:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 261.410000] sd 111:0:0:0: Attached scsi generic sg1 type 0
[ 261.420000] sd 111:0:0:0: [sdf] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[ 261.420000] sd 111:0:0:0: [sdf] Write Protect is off
[ 261.430000] sd 111:0:0:0: [sdf] Mode Sense: 0f 0e 00 00
[ 261.430000] sd 111:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 261.450000] sdf: sdf1 sdf2
[ 261.460000] sd 111:0:0:0: [sdf] Attached SCSI removable disk
[ 262.810000] EXT4-fs (sdf1): couldn't mount as ext3 due to feature incompatibilities
[ 262.820000] EXT4-fs (sdf1): couldn't mount as ext2 due to feature incompatibilities
[ 262.880000] EXT4-fs (sdf1): recovery complete
[ 262.880000] EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null)
[ 263.140000] Adding 2097148k swap on /dev/sdf2. Priority:-6 extents:1 across:2097148k
[ 266.130000] Write-error on swap-device (8:0:24)
[ 266.230000] Write-error on swap-device (8:0:32)
[ 266.230000] Write-error on swap-device (8:0:40)
[ 268.920000] usb 1-1: USB disconnect, device number 72
[ 268.920000] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 268.930000] usbserial_generic 1-1:1.0: device disconnected
[ 268.930000] cdc_ether 1-1:1.1 wwan0: unregister 'cdc_ether' usb-ehci-platform-1, Mobile Broadband Network Device
[ 268.960000] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 268.960000] usbserial_generic 1-1:1.3: device disconnected
[ 268.970000] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[ 268.980000] usbserial_generic 1-1:1.4: device disconnected
[ 269.000000] sd 111:0:0:0: [sdf] Synchronizing SCSI cache
[ 269.000000] sd 111:0:0:0: [sdf]
[ 269.000000] Result: hostbyte=0x01 driverbyte=0x00
[ 269.300000] usb 1-1: new high-speed USB device number 73 using ehci-platform
[ 269.460000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 269.740000] usb 1-1: new high-speed USB device number 74 using ehci-platform
[ 269.900000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 270.180000] usb 1-1: new high-speed USB device number 75 using ehci-platform
[ 270.420000] usb 1-1: device descriptor read/all, error -71
[ 270.490000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 270.770000] usb 1-1: new high-speed USB device number 77 using ehci-platform
[ 270.930000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 271.210000] usb 1-1: new high-speed USB device number 78 using ehci-platform
[ 271.370000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 271.650000] usb 1-1: new high-speed USB device number 79 using ehci-platform
[ 271.810000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 272.030000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 272.310000] usb 1-1: new high-speed USB device number 81 using ehci-platform
[ 272.470000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 272.750000] usb 1-1: new high-speed USB device number 82 using ehci-platform
[ 272.910000] usbserial_generic 1-1:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 272.910000] usbserial_generic 1-1:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 272.920000] usbserial_generic 1-1:1.0: generic converter detected
[ 272.930000] usb 1-1: generic converter now attached to ttyUSB0
[ 272.950000] cdc_ether 1-1:1.1 wwan0: register 'cdc_ether' at usb-ehci-platform-1, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 272.980000] usbserial_generic 1-1:1.3: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 272.990000] usbserial_generic 1-1:1.3: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 272.990000] usbserial_generic 1-1:1.3: generic converter detected
[ 273.000000] usb 1-1: generic converter now attached to ttyUSB1
[ 273.040000] usbserial_generic 1-1:1.4: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 273.050000] usbserial_generic 1-1:1.4: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 273.060000] usbserial_generic 1-1:1.4: generic converter detected
[ 273.070000] usb 1-1: generic converter now attached to ttyUSB2
[ 273.130000] scsi116 : usb-storage 1-1:1.5
[ 273.170000] scsi117 : usb-storage 1-1:1.6
[ 273.170000] usb 1-1: USB disconnect, device number 82
[ 273.170000] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 273.180000] usbserial_generic 1-1:1.0: device disconnected
[ 273.190000] cdc_ether 1-1:1.1 wwan0: unregister 'cdc_ether' usb-ehci-platform-1, Mobile Broadband Network Device
[ 273.210000] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 273.210000] usbserial_generic 1-1:1.3: device disconnected
[ 273.220000] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[ 273.220000] usbserial_generic 1-1:1.4: device disconnected
[ 273.310000] Write-error on swap-device (8:0:48)
[ 273.510000] usb 1-1: new high-speed USB device number 83 using ehci-platform
[ 273.660000] usbserial_generic 1-1:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 273.670000] usbserial_generic 1-1:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 273.680000] usbserial_generic 1-1:1.0: generic converter detected
[ 273.690000] usb 1-1: generic converter now attached to ttyUSB0
[ 273.710000] Write-error on swap-device (8:0:56)
[ 273.720000] cdc_ether 1-1:1.1 wwan0: register 'cdc_ether' at usb-ehci-platform-1, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 273.760000] usbserial_generic 1-1:1.3: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 273.760000] usbserial_generic 1-1:1.3: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 273.770000] usbserial_generic 1-1:1.3: generic converter detected
[ 273.780000] usb 1-1: generic converter now attached to ttyUSB1
[ 273.820000] usbserial_generic 1-1:1.4: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 273.820000] usbserial_generic 1-1:1.4: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 273.830000] usbserial_generic 1-1:1.4: generic converter detected
[ 273.840000] usb 1-1: generic converter now attached to ttyUSB2
[ 273.870000] scsi122 : usb-storage 1-1:1.5
[ 273.870000] scsi123 : usb-storage 1-1:1.6
[ 274.870000] scsi 122:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 274.870000] scsi 122:0:0:0: Attached scsi generic sg0 type 5
[ 274.880000] scsi 123:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 274.890000] sd 123:0:0:0: Attached scsi generic sg1 type 0
[ 274.920000] sd 123:0:0:0: [sdg] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[ 274.920000] sd 123:0:0:0: [sdg] Write Protect is off
[ 274.930000] sd 123:0:0:0: [sdg] Mode Sense: 0f 0e 00 00
[ 274.950000] sd 123:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 274.960000] sdg: sdg1 sdg2
[ 274.990000] sd 123:0:0:0: [sdg] Attached SCSI removable disk
[ 280.690000] EXT4-fs (sdg1): couldn't mount as ext3 due to feature incompatibilities
[ 280.700000] EXT4-fs (sdg1): couldn't mount as ext2 due to feature incompatibilities
[ 280.750000] EXT4-fs (sdg1): recovery complete
[ 280.760000] EXT4-fs (sdg1): mounted filesystem with ordered data mode. Opts: (null)
[ 280.970000] Adding 2097148k swap on /dev/sdg2. Priority:-7 extents:1 across:2097148k
[ 289.920000] usb 1-1: USB disconnect, device number 83
[ 289.920000] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 289.930000] usbserial_generic 1-1:1.0: device disconnected
[ 289.930000] cdc_ether 1-1:1.1 wwan0: unregister 'cdc_ether' usb-ehci-platform-1, Mobile Broadband Network Device
[ 289.960000] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 289.960000] usbserial_generic 1-1:1.3: device disconnected
[ 289.970000] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[ 289.970000] usbserial_generic 1-1:1.4: device disconnected
[ 289.980000] sd 123:0:0:0: [sdg] Synchronizing SCSI cache
[ 290.000000] sd 123:0:0:0: [sdg]
[ 290.000000] Result: hostbyte=0x01 driverbyte=0x00
[ 290.220000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 290.500000] usb 1-1: new high-speed USB device number 85 using ehci-platform
[ 290.660000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 290.880000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 291.160000] usb 1-1: new high-speed USB device number 87 using ehci-platform
[ 291.320000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 291.600000] usb 1-1: new high-speed USB device number 88 using ehci-platform
[ 291.760000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 292.040000] usb 1-1: new high-speed USB device number 89 using ehci-platform
[ 292.640000] usb 1-1: device not accepting address 89, error -71
[ 292.700000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 292.980000] usb 1-1: new high-speed USB device number 91 using ehci-platform
[ 293.130000] usbserial_generic 1-1:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 293.140000] usbserial_generic 1-1:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 293.150000] usbserial_generic 1-1:1.0: generic converter detected
[ 293.160000] usb 1-1: generic converter now attached to ttyUSB0
[ 293.170000] cdc_ether 1-1:1.1 wwan0: register 'cdc_ether' at usb-ehci-platform-1, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 293.190000] usbserial_generic 1-1:1.3: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 293.200000] usbserial_generic 1-1:1.3: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 293.200000] usbserial_generic 1-1:1.3: generic converter detected
[ 293.210000] usb 1-1: generic converter now attached to ttyUSB1
[ 293.230000] usbserial_generic 1-1:1.4: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 293.230000] usbserial_generic 1-1:1.4: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 293.240000] usbserial_generic 1-1:1.4: generic converter detected
[ 293.250000] usb 1-1: generic converter now attached to ttyUSB2
[ 293.270000] scsi128 : usb-storage 1-1:1.5
[ 293.270000] scsi129 : usb-storage 1-1:1.6
[ 294.270000] scsi 128:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 294.270000] scsi 128:0:0:0: Attached scsi generic sg0 type 5
[ 294.290000] scsi 129:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 294.290000] sd 129:0:0:0: Attached scsi generic sg1 type 0
[ 294.300000] sd 129:0:0:0: [sdh] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[ 294.320000] sd 129:0:0:0: [sdh] Write Protect is off
[ 294.320000] sd 129:0:0:0: [sdh] Mode Sense: 0f 0e 00 00
[ 294.320000] sd 129:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 294.340000] sdh: sdh1 sdh2
[ 294.350000] sd 129:0:0:0: [sdh] Attached SCSI removable disk
[ 295.730000] EXT4-fs (sdh1): couldn't mount as ext3 due to feature incompatibilities
[ 295.740000] EXT4-fs (sdh1): couldn't mount as ext2 due to feature incompatibilities
[ 295.800000] EXT4-fs (sdh1): recovery complete
[ 295.800000] EXT4-fs (sdh1): mounted filesystem with ordered data mode. Opts: (null)
[ 296.060000] Adding 2097148k swap on /dev/sdh2. Priority:-8 extents:1 across:2097148k
[ 300.920000] usb 1-1: USB disconnect, device number 91
[ 300.930000] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 300.930000] usbserial_generic 1-1:1.0: device disconnected
[ 300.940000] cdc_ether 1-1:1.1 wwan0: unregister 'cdc_ether' usb-ehci-platform-1, Mobile Broadband Network Device
[ 300.960000] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 300.960000] usbserial_generic 1-1:1.3: device disconnected
[ 300.970000] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[ 300.980000] usbserial_generic 1-1:1.4: device disconnected
[ 300.980000] sd 129:0:0:0: [sdh] Synchronizing SCSI cache
[ 301.000000] sd 129:0:0:0: [sdh]
[ 301.000000] Result: hostbyte=0x01 driverbyte=0x00
[ 301.280000] usb 1-1: new high-speed USB device number 92 using ehci-platform
[ 301.440000] usbserial_generic 1-1:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 301.440000] usbserial_generic 1-1:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 301.450000] usbserial_generic 1-1:1.0: generic converter detected
[ 301.460000] usb 1-1: generic converter now attached to ttyUSB0
[ 301.560000] cdc_ether 1-1:1.1 wwan0: register 'cdc_ether' at usb-ehci-platform-1, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 301.670000] usbserial_generic 1-1:1.3: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 301.680000] usbserial_generic 1-1:1.3: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 301.690000] usbserial_generic 1-1:1.3: generic converter detected
[ 301.700000] usb 1-1: generic converter now attached to ttyUSB1
[ 301.720000] usbserial_generic 1-1:1.4: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 301.720000] usbserial_generic 1-1:1.4: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 301.730000] usbserial_generic 1-1:1.4: generic converter detected
[ 301.740000] usb 1-1: generic converter now attached to ttyUSB2
[ 301.750000] scsi134 : usb-storage 1-1:1.5
[ 301.750000] scsi135 : usb-storage 1-1:1.6
[ 301.970000] usb 1-1: USB disconnect, device number 92
[ 301.970000] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 301.980000] usbserial_generic 1-1:1.0: device disconnected
[ 301.990000] cdc_ether 1-1:1.1 wwan0: unregister 'cdc_ether' usb-ehci-platform-1, Mobile Broadband Network Device
[ 302.010000] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 302.010000] usbserial_generic 1-1:1.3: device disconnected
[ 302.020000] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[ 302.030000] usbserial_generic 1-1:1.4: device disconnected
[ 302.370000] usb 1-1: new high-speed USB device number 93 using ehci-platform
[ 302.890000] usb 1-1: string descriptor 0 read error: -71
[ 302.920000] usb 1-1: can't set config #1, error -71
[ 302.930000] usb 1-1: USB disconnect, device number 93
[ 303.220000] usb 1-1: new high-speed USB device number 94 using ehci-platform
[ 303.580000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 303.860000] usb 1-1: new high-speed USB device number 95 using ehci-platform
[ 304.020000] usbserial_generic 1-1:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 304.030000] usbserial_generic 1-1:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 304.040000] usbserial_generic 1-1:1.0: generic converter detected
[ 304.050000] usb 1-1: generic converter now attached to ttyUSB0
[ 304.100000] cdc_ether 1-1:1.1 wwan0: register 'cdc_ether' at usb-ehci-platform-1, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 304.140000] usbserial_generic 1-1:1.3: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 304.140000] usbserial_generic 1-1:1.3: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 304.150000] usbserial_generic 1-1:1.3: generic converter detected
[ 304.160000] usb 1-1: generic converter now attached to ttyUSB1
[ 304.220000] usbserial_generic 1-1:1.4: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 304.220000] usbserial_generic 1-1:1.4: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 304.230000] usbserial_generic 1-1:1.4: generic converter detected
[ 304.240000] usb 1-1: generic converter now attached to ttyUSB2
[ 304.340000] scsi140 : usb-storage 1-1:1.5
[ 304.350000] scsi141 : usb-storage 1-1:1.6
[ 305.540000] scsi 140:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 305.540000] scsi 140:0:0:0: Attached scsi generic sg0 type 5
[ 305.550000] scsi 141:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 305.560000] sd 141:0:0:0: Attached scsi generic sg1 type 0
[ 305.640000] sd 141:0:0:0: [sdi] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[ 305.640000] sd 141:0:0:0: [sdi] Write Protect is off
[ 305.650000] sd 141:0:0:0: [sdi] Mode Sense: 0f 0e 00 00
[ 305.660000] sd 141:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 305.940000] sdi: sdi1 sdi2
[ 305.960000] sd 141:0:0:0: [sdi] Attached SCSI removable disk
[ 314.520000] EXT4-fs (sdi1): couldn't mount as ext3 due to feature incompatibilities
[ 314.530000] EXT4-fs (sdi1): couldn't mount as ext2 due to feature incompatibilities
[ 314.580000] EXT4-fs (sdi1): recovery complete
[ 314.590000] EXT4-fs (sdi1): mounted filesystem with ordered data mode. Opts: (null)
[ 314.890000] Adding 2097148k swap on /dev/sdi2. Priority:-9 extents:1 across:2097148k
[ 321.960000] usb 1-1: USB disconnect, device number 95
[ 321.960000] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 321.970000] usbserial_generic 1-1:1.0: device disconnected
[ 321.970000] cdc_ether 1-1:1.1 wwan0: unregister 'cdc_ether' usb-ehci-platform-1, Mobile Broadband Network Device
[ 322.000000] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 322.000000] usbserial_generic 1-1:1.3: device disconnected
[ 322.010000] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[ 322.020000] usbserial_generic 1-1:1.4: device disconnected
[ 322.030000] sd 141:0:0:0: [sdi] Synchronizing SCSI cache
[ 322.030000] sd 141:0:0:0: [sdi]
[ 322.030000] Result: hostbyte=0x01 driverbyte=0x00
[ 322.330000] usb 1-1: new high-speed USB device number 96 using ehci-platform
[ 322.490000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 322.710000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 322.990000] usb 1-1: new high-speed USB device number 98 using ehci-platform
[ 323.150000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 323.430000] usb 1-1: new high-speed USB device number 99 using ehci-platform
[ 323.590000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 323.870000] usb 1-1: new high-speed USB device number 100 using ehci-platform
[ 324.030000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 324.310000] usb 1-1: new high-speed USB device number 101 using ehci-platform
[ 324.470000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 324.750000] usb 1-1: new high-speed USB device number 102 using ehci-platform
[ 324.900000] usbserial_generic 1-1:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 324.910000] usbserial_generic 1-1:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 324.920000] usbserial_generic 1-1:1.0: generic converter detected
[ 324.930000] usb 1-1: generic converter now attached to ttyUSB0
[ 324.940000] cdc_ether 1-1:1.1 wwan0: register 'cdc_ether' at usb-ehci-platform-1, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 324.960000] usbserial_generic 1-1:1.3: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 324.970000] usbserial_generic 1-1:1.3: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 324.970000] usbserial_generic 1-1:1.3: generic converter detected
[ 324.980000] usb 1-1: generic converter now attached to ttyUSB1
[ 325.000000] usbserial_generic 1-1:1.4: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 325.000000] usbserial_generic 1-1:1.4: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
[ 325.010000] usbserial_generic 1-1:1.4: generic converter detected
[ 325.020000] usb 1-1: generic converter now attached to ttyUSB2
[ 325.040000] scsi146 : usb-storage 1-1:1.5
[ 325.040000] scsi147 : usb-storage 1-1:1.6
[ 326.090000] scsi 146:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 326.100000] scsi 146:0:0:0: Attached scsi generic sg0 type 5
[ 326.110000] scsi 147:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 326.120000] sd 147:0:0:0: Attached scsi generic sg1 type 0
[ 326.130000] sd 147:0:0:0: [sdj] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[ 326.130000] sd 147:0:0:0: [sdj] Write Protect is off
[ 326.140000] sd 147:0:0:0: [sdj] Mode Sense: 0f 0e 00 00
[ 326.140000] sd 147:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 326.170000] sdj: sdj1 sdj2
[ 326.190000] sd 147:0:0:0: [sdj] Attached SCSI removable disk
[ 327.930000] EXT4-fs (sdj1): couldn't mount as ext3 due to feature incompatibilities
[ 327.940000] EXT4-fs (sdj1): couldn't mount as ext2 due to feature incompatibilities
[ 328.000000] EXT4-fs (sdj1): recovery complete
[ 328.000000] EXT4-fs (sdj1): mounted filesystem with ordered data mode. Opts: (null)
[ 328.320000] Write-error on swap-device (8:0:64)
[ 328.320000] Adding 2097148k swap on /dev/sdj2. Priority:-10 extents:1 across:2097148k
[ 332.930000] usb 1-1: USB disconnect, device number 102
[ 332.940000] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[ 332.940000] usbserial_generic 1-1:1.0: device disconnected
[ 332.950000] cdc_ether 1-1:1.1 wwan0: unregister 'cdc_ether' usb-ehci-platform-1, Mobile Broadband Network Device
[ 332.960000] generic ttyUSB1: generic converter now disconnected from ttyUSB1
[ 332.970000] usbserial_generic 1-1:1.3: device disconnected
[ 332.980000] generic ttyUSB2: generic converter now disconnected from ttyUSB2
[ 332.980000] usbserial_generic 1-1:1.4: device disconnected
[ 332.990000] sd 147:0:0:0: [sdj] Synchronizing SCSI cache
[ 333.010000] sd 147:0:0:0: [sdj]
[ 333.010000] Result: hostbyte=0x01 driverbyte=0x00
[ 333.290000] usb 1-1: new high-speed USB device number 103 using ehci-platform
[ 333.450000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 333.670000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 333.950000] usb 1-1: new high-speed USB device number 105 using ehci-platform
[ 334.110000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 334.390000] usb 1-1: new high-speed USB device number 106 using ehci-platform
[ 334.550000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 334.770000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 335.050000] usb 1-1: new high-speed USB device number 108 using ehci-platform
[ 335.210000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 335.490000] usb 1-1: new high-speed USB device number 109 using ehci-platform
[ 335.650000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 335.930000] usb 1-1: new high-speed USB device number 110 using ehci-platform
[ 336.080000] usbserial_generic 1-1:1.0: The "generic" usb-serial driver is only for testing and one-off prototypes.
[ 336.090000] usbserial_generic 1-1:1.0: Tell linux-usb@vger.kernel.org to add your device to a proper driver.
any Ideas ?
Thanks for help
-
Hello,
I think I solved it.
I see that when I have 3 G enabled at boot. it does not seem wo work. If it is disabled it works.
just as info.
Rgds
-
Hello,
I am having problems to setup my 3 G Modem ( Huawei E173 )
I am running Mark IV 2.7.7
Thi is my log :
00:01:46 Pineapple daemon.info dnsmasq-dhcp[1100]: DHCPREQUEST(br-lan) 172.16.42.163 00:19:d2:29:c3:17
00:01:46 Pineapple daemon.info dnsmasq-dhcp[1100]: DHCPOFFER(br-lan) 172.16.42.163 00:19:d2:29:c3:17
00:01:46 Pineapple daemon.info dnsmasq-dhcp[1100]: DHCPDISCOVER(br-lan) 172.16.42.163 00:19:d2:29:c3:17
00:01:46 Pineapple daemon.info dnsmasq-dhcp[1100]: DHCPACK(br-lan) 172.16.42.163 00:19:d2:29:c3:17 bt
00:01:42 Pineapple daemon.info hostapd: wlan0: STA 00:19:d2:29:c3:17 IEEE 802.11: authenticated
00:01:42 Pineapple daemon.info hostapd: wlan0: STA 00:19:d2:29:c3:17 IEEE 802.11: associated (aid 1)
00:01:27 Pineapple kern.info kernel: [ 87.890000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
00:01:26 Pineapple user.notice usb-modeswitch: 1-1:1.6: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:01:26 Pineapple user.notice usb-modeswitch: 1-1:1.5: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:01:26 Pineapple user.notice usb-modeswitch: 1-1:1.4: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:01:26 Pineapple user.notice usb-modeswitch: 1-1:1.3: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:01:26 Pineapple user.notice usb-modeswitch: 1-1:1.2: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:01:25 Pineapple user.notice usb-modeswitch: 1-1:1.1: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:01:25 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:01:23 Pineapple user.notice usb-modeswitch: 1-1:1.6: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:01:23 Pineapple user.notice usb-modeswitch: 1-1:1.5: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:01:23 Pineapple user.notice usb-modeswitch: 1-1:1.4: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:01:23 Pineapple user.notice usb-modeswitch: 1-1:1.3: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:01:23 Pineapple user.notice usb-modeswitch: 1-1:1.2: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:01:23 Pineapple user.notice usb-modeswitch: 1-1:1.1: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:01:23 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:01:21 Pineapple kern.info kernel: [ 81.200000] Adding 2097148k swap on /dev/sda2. Priority:-1 extents:1 across:2097148k
00:01:20 Pineapple kern.notice kernel: [ 80.810000] sd 13:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
00:01:20 Pineapple kern.notice kernel: [ 80.790000] sd 13:0:0:0: [sda] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
00:01:20 Pineapple kern.info kernel: [ 80.890000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
00:01:20 Pineapple kern.info kernel: [ 80.880000] EXT4-fs (sda1): recovery complete
00:01:20 Pineapple kern.info kernel: [ 80.830000] sda: sda1 sda2
00:01:12 Pineapple user.notice usb-modeswitch: 1-1:1.1: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:01:05 Pineapple user.info sysinit: setting up led WLAN
00:01:05 Pineapple user.info sysinit: setting up led WAN
00:01:05 Pineapple user.info sysinit: setting up led USB
00:01:05 Pineapple user.info sysinit: setting up led LAN
00:01:05 Pineapple user.info sysinit: Selected interface 'wlan0'
00:01:05 Pineapple user.info sysini
my 3G is this
case "$MODEM" in
*12d1:1436*) echo "Huawei E173 detected. Attempting mode switch"
uci delete network.wan2
uci set network.wan2=interface
uci set network.wan2.ifname=ppp0
uci set network.wan2.proto=3g
uci set network.wan2.service=umts
uci set network.wan2.device=/dev/ttyUSB0
uci set network.wan2.apn=<>
uci set network.wan2.username=<>
uci set network.wan2.password=<>
uci set network.wan2.defaultroute=1
uci commit network
usb_modeswitch -v 12d1 -p 1436
sleep 10; rmmod usbserial
sleep 3; insmod usbserial vendor=0x12d1 product=0x1436
sleep 5; /etc/init.d/firewall disable; /etc/init.d/firewall stop
logger "3G: firewall stopped"
iptables -t nat -A POSTROUTING -s 172.16.42.0/24 -o 3g-wan2 -j MASQUERADE
iptables -A FORWARD -s 172.16.42.0/24 -o 3g-wan2 -j ACCEPT
iptables -A FORWARD -d 172.16.42.0/24 -m state --state ESTABLISHED,RELATED -i 3g-wan2 -j ACCEPT
;;
my Dmseg I have this:
Execute: dmesg
[ 0.000000] Linux version 3.7.6 (sebkinne@nimbus) (gcc version 4.6.4 20121210 (prerelease) (Linaro GCC 4.6-2012.12) ) #7 Sun Feb 10 23:47:40 GMT 2013
[ 0.000000] MyLoader: sysp=f0f0f0f0, boardp=f0f0f0f0, parts=f0f0f0f0
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[ 0.000000] SoC: Atheros AR9330 rev 1
[ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] On node 0 totalpages: 8192
[ 0.000000] free_area_init_node: node 0, pgdat 802c1d70, node_mem_map 81000000
[ 0.000000] Normal zone: 64 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 8128 pages, LIFO batch:0
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: board=HORNET-UB console=ttyATH0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 29112k/32768k available (2115k kernel code, 3656k reserved, 411k data, 224k init, 0k highmem)
[ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 512
[ 0.090000] NET: Registered protocol family 16
[ 0.090000] MIPS: machine is ALFA NETWORKS Hornet-UB
[ 0.550000] bio: create slab at 0
[ 0.550000] Switching to clocksource MIPS
[ 0.560000] NET: Registered protocol family 2
[ 0.560000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.570000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.570000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.580000] TCP: reno registered
[ 0.580000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.590000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.600000] NET: Registered protocol family 1
[ 0.600000] PCI: CLS 0 bytes, default 32
[ 0.620000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.620000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc.
[ 0.630000] msgmni has been set to 56
[ 0.640000] io scheduler noop registered
[ 0.640000] io scheduler deadline registered (default)
[ 0.640000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.650000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
[ 0.660000] console [ttyATH0] enabled, bootconsole disabled
[ 0.670000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[ 0.680000] m25p80 spi0.0: found mx25l6405d, expected m25p80
[ 0.680000] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
[ 0.690000] 7 cmdlinepart partitions found on MTD device spi0.0
[ 0.690000] Creating 7 MTD partitions on "spi0.0":
[ 0.700000] 0x000000000000-0x000000040000 : "u-boot"
[ 0.700000] 0x000000040000-0x000000050000 : "u-boot-env"
[ 0.710000] 0x000000050000-0x000000650000 : "rootfs"
[ 0.720000] mtd: partition "rootfs" set to be root filesystem
[ 0.720000] mtd: partition "rootfs_data" created automatically, ofs=540000, len=110000
[ 0.730000] 0x000000540000-0x000000650000 : "rootfs_data"
[ 0.740000] 0x000000650000-0x0000007e0000 : "kernel"
[ 0.740000] 0x0000007e0000-0x0000007f0000 : "nvram"
[ 0.750000] 0x0000007f0000-0x000000800000 : "art"
[ 0.750000] 0x000000050000-0x0000007e0000 : "firmware"
[ 0.780000] libphy: ag71xx_mdio: probed
[ 0.780000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[ 1.330000] eth0: Found an AR7240/AR9330 built-in switch
[ 2.370000] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[ 2.920000] ag71xx ag71xx.0 eth1: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[ 2.930000] TCP: cubic registered
[ 2.930000] NET: Registered protocol family 17
[ 2.940000] Bridge firewalling registered
[ 2.940000] 8021q: 802.1Q VLAN Support v1.8
[ 2.950000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 2.960000] Freeing unused kernel memory: 224k freed
[ 6.400000] Registered led device: alfa:blue:lan
[ 6.400000] Registered led device: alfa:blue:usb
[ 6.400000] Registered led device: alfa:blue:wan
[ 6.400000] Registered led device: alfa:blue:wlan
[ 6.400000] Registered led device: alfa:blue:wps
[ 9.720000] jffs2: notice: (460) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 15 of xref (0 dead, 5 orphan) found.
[ 10.730000] SCSI subsystem initialized
[ 11.030000] usbcore: registered new interface driver usbfs
[ 11.030000] usbcore: registered new interface driver hub
[ 11.040000] usbcore: registered new device driver usb
[ 11.650000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 11.660000] ehci-platform ehci-platform: Generic Platform EHCI Controller
[ 11.670000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 11.700000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 11.720000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 11.720000] hub 1-0:1.0: USB hub found
[ 11.720000] hub 1-0:1.0: 1 port detected
[ 11.840000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 11.960000] uhci_hcd: USB Universal Host Controller Interface driver
[ 12.070000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 12.080000] Initializing USB Mass Storage driver...
[ 12.090000] usbcore: registered new interface driver usb-storage
[ 12.090000] USB Mass Storage support registered.
[ 12.360000] usb 1-1: new high-speed USB device number 3 using ehci-platform
[ 12.960000] usb 1-1: device not accepting address 3, error -71
[ 13.020000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 13.300000] usb 1-1: new high-speed USB device number 5 using ehci-platform
[ 13.900000] usb 1-1: device not accepting address 5, error -71
[ 13.960000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 14.240000] usb 1-1: new high-speed USB device number 7 using ehci-platform
[ 14.390000] scsi0 : usb-storage 1-1:1.0
[ 14.400000] scsi1 : usb-storage 1-1:1.1
[ 15.390000] scsi 0:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 15.400000] scsi 1:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 15.410000] sd 1:0:0:0: [sda] Attached SCSI removable disk
[ 33.520000] Compat-drivers backport release: compat-drivers-2013-01-08-3
[ 33.520000] Backport based on wireless-testing.git master-2013-01-07
[ 33.530000] compat.git: wireless-testing.git
[ 33.650000] cfg80211: Calling CRDA to update world regulatory domain
[ 33.650000] cfg80211: World regulatory domain updated:
[ 33.660000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 33.660000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 33.670000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 33.680000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 33.690000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 33.690000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 35.050000] usbcore: registered new interface driver rt73usb
[ 35.190000] usbcore: registered new interface driver rtl8187
[ 35.230000] ath: EEPROM regdomain: 0x833a
[ 35.230000] ath: EEPROM indicates we should expect a country code
[ 35.230000] ath: doing EEPROM country->regdmn map search
[ 35.230000] ath: country maps to regdmn code: 0x37
[ 35.230000] ath: Country alpha2 being used: GB
[ 35.230000] ath: Regpair used: 0x37
[ 35.240000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 35.240000] Registered led device: ath9k-phy0
[ 35.240000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[ 35.260000] usbcore: registered new interface driver rt2800usb
[ 35.390000] cfg80211: Calling CRDA for country: GB
[ 35.390000] cfg80211: Regulatory domain changed to country: GB
[ 35.390000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 35.400000] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 35.410000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 35.420000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 35.420000] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 35.480000] Button Hotplug driver version 0.4.1
[ 35.670000] RPC: Registered named UNIX socket transport module.
[ 35.670000] RPC: Registered udp transport module.
[ 35.680000] RPC: Registered tcp transport module.
[ 35.680000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 36.040000] PPP generic driver version 2.4.2
[ 36.170000] tun: Universal TUN/TAP device driver, 1.6
[ 36.170000] tun: © 1999-2004 Max Krasnyansky
[ 36.440000] ip_tables: © 2000-2006 Netfilter Core Team
[ 36.680000] NET: Registered protocol family 24
[ 36.810000] nf_conntrack version 0.5.0 (458 buckets, 1832 max)
[ 37.820000] usbcore: registered new interface driver ath9k_htc
[ 38.070000] usbcore: registered new interface driver usbserial
[ 38.070000] usbcore: registered new interface driver usbserial_generic
[ 38.080000] usbserial: USB Serial support registered for generic
[ 38.220000] usbcore: registered new interface driver cdc_ether
[ 38.330000] Error: Driver 'gpio-keys-polled' is already registered, aborting...
[ 38.460000] usbcore: registered new interface driver rndis_host
[ 38.590000] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[ 38.590000] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 41.000000] sd 1:0:0:0: [sda] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[ 41.010000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 41.030000] sda: sda1 sda2
[ 42.460000] usb 1-1: USB disconnect, device number 7
[ 42.460000] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 42.480000] sd 1:0:0:0: [sda]
[ 42.490000] Result: hostbyte=0x01 driverbyte=0x00
[ 44.990000] device eth0 entered promiscuous mode
[ 46.620000] usb 1-1: new high-speed USB device number 8 using ehci-platform
[ 46.770000] cdc_ether 1-1:1.1 wwan0: register 'cdc_ether' at usb-ehci-platform-1, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 46.790000] scsi6 : usb-storage 1-1:1.5
[ 46.800000] scsi7 : usb-storage 1-1:1.6
[ 47.800000] scsi 6:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 47.800000] scsi 6:0:0:0: Attached scsi generic sg0 type 5
[ 47.810000] scsi 7:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 47.820000] sd 7:0:0:0: Attached scsi generic sg1 type 0
[ 47.830000] sd 7:0:0:0: [sda] Attached SCSI removable disk
[ 50.780000] device wlan0 entered promiscuous mode
[ 50.860000] br-lan: port 2(wlan0) entered forwarding state
[ 50.860000] br-lan: port 2(wlan0) entered forwarding state
[ 52.840000] usb 1-1: USB disconnect, device number 8
[ 52.850000] cdc_ether 1-1:1.1 wwan0: unregister 'cdc_ether' usb-ehci-platform-1, Mobile Broadband Network Device
[ 52.860000] br-lan: port 2(wlan0) entered forwarding state
[ 53.150000] usb 1-1: new high-speed USB device number 9 using ehci-platform
[ 53.750000] usb 1-1: device not accepting address 9, error -71
[ 53.810000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 54.140000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 54.810000] usb 1-1: new high-speed USB device number 12 using ehci-platform
[ 55.410000] usb 1-1: device not accepting address 12, error -71
[ 55.470000] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 55.750000] usb 1-1: new high-speed USB device number 14 using ehci-platform
[ 55.910000] cdc_ether 1-1:1.1 wwan0: register 'cdc_ether' at usb-ehci-platform-1, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 55.920000] scsi12 : usb-storage 1-1:1.5
[ 55.920000] scsi13 : usb-storage 1-1:1.6
[ 56.920000] scsi 12:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 56.920000] scsi 12:0:0:0: Attached scsi generic sg0 type 5
[ 56.930000] scsi 13:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 56.940000] sd 13:0:0:0: Attached scsi generic sg1 type 0
[ 56.950000] sd 13:0:0:0: [sda] Attached SCSI removable disk
[ 61.370000] device wlan0 left promiscuous mode
[ 61.370000] br-lan: port 2(wlan0) entered disabled state
[ 62.420000] device wlan0 entered promiscuous mode
[ 62.520000] br-lan: port 2(wlan0) entered forwarding state
[ 62.520000] br-lan: port 2(wlan0) entered forwarding state
[ 64.520000] br-lan: port 2(wlan0) entered forwarding state
[ 80.790000] sd 13:0:0:0: [sda] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB)
[ 80.810000] sd 13:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 80.830000] sda: sda1 sda2
[ 80.880000] EXT4-fs (sda1): recovery complete
[ 80.890000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 81.200000] Adding 2097148k swap on /dev/sda2. Priority:-1 extents:1 across:2097148k
[ 87.890000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Does anybody know what I am doing wrong ?
Thanks
-
Hello d1000 I am also using the same 3G modem as you and I am having the same issue as you.
could you post your FSTAB ?
Thanks
-
Thanks for the great work.
Now go drink Darren under the table tomorrow ;-)
-
Hi my Huawei E173 does not work anymore.
here the log:
00:54:31 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
00:54:30 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
00:54:30 Pineapple kern.notice kernel: [ 3270.540000] sd 51:0:0:0: [sda] Attached SCSI removable disk
00:54:30 Pineapple kern.notice kernel: [ 3270.520000] sd 51:0:0:0: Attached scsi generic sg1 type 0
00:54:30
Pineapple kern.notice kernel: [ 3270.520000] scsi 51:0:0:0:
Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
00:54:30
Pineapple kern.notice kernel: [ 3270.500000] scsi 50:0:0:0: CD-ROM
HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
00:54:30 Pineapple kern.notice kernel: [ 3270.500000] scsi 50:0:0:0: Attached scsi generic sg0 type 5
00:54:29 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
00:54:29 Pineapple user.notice usb-modeswitch: 1-1:1.0: Selecting /etc/usb_modeswitch.d/12d1:1446 for mode switching
00:54:29 Pineapple user.notice usb-modeswitch: 1-1:1.0: Manufacturer=HUAWEI_Technology Product=HUAWEI_Mobile Serial=?
00:54:29 Pineapple kern.info kernel: [ 3269.520000] scsi51 : usb-storage 1-1:1.1
00:54:29 Pineapple kern.info kernel: [ 3269.500000] scsi50 : usb-storage 1-1:1.0
00:54:29 Pineapple kern.info kernel: [ 3269.350000] usb 1-1: new high-speed USB device number 27 using ehci-platform
00:54:25 Pineapple user.notice usb-modeswitch: 1-1:1.1: Manufacturer=? Product=? Serial=?
00:54:25 Pineapple kern.info kernel: [ 3265.200000] usb 1-1: USB disconnect, device number 26
00:54:24 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
00:54:23 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
00:54:22 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
00:54:21 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
00:54:20 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
00:54:19 Pineapple user.notice usb-modeswitch: 1-1:1.0: Switching seemingly failed
00:54:19 Pineapple kern.notice kernel: [ 3259.310000] sd 49:0:0:0: [sda] Attached SCSI removable disk
00:54:19 Pineapple kern.notice kernel: [ 3259.300000] sd 49:0:0:0: Attached scsi generic sg1 type 0
00:54:19
Pineapple kern.notice kernel: [ 3259.290000] scsi 49:0:0:0:
Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2 -
Hello,
you need to bridge the two ethernet ports.
Have a look here how that is done:
http://www.irongeek....ge-ubuntu-linux
Rgds
-
Richy,
I would take one that has 12V output the "mAh " tells you the battery pack will last longer the bigger the number is.
I am saying to use the 12V as if you at one point want to use a 3G dongel they have an issue running on only 5V as the USB port usually have.
You can read some posts here in the forum were people had issues with only 5V with 3G dongles connected to the pineapple and the pinapple running on only 5V battery packs.
-
well what you need to do is connect the POE from the pineapple to any Lan port of the router. But your main problem is the IP setup you are having. this will not work.
You could put your home router on IP 172.16.42.42 or you will need to adjust the pineapple to the IP of your home network.
after that you should be good to go
/webdirector
-
Hello
Can you please post exact installtion instructions ?
Thanks
-
He is trying to flash the pineapple......
Have look at Seb firmware download page. Thi is from latest version for mark IV
( http://forums.hak5.org/index.php?showtopic=25753 )
4c476e1072b188c2b009d5c8f996faf2
Rgds
-
-
Oh Joy, Finally managed to get this to work on the Huawei E353, even dough it showed up as E398. I used the USB Mode_Switch for 12d1:1506, It runs smooth as silk, Thank you soo much guys for helping me sorting this out,
By the way, Just so nobody does the same F"#¤% i did the first 2 hours of trying, DO NOT USE BATTERY POWER before you get it up and running, Damn rookie mistake from my side . Also double and triple check the APN settings, Google is your friend
Hello Thetra,
Can you plase post what you put into the usb_modeswitch and what your 3g script is?
I have the same modem but i can not get it to work.
Thanks
-
Thx , i've found this one on Amazon UK http://www.amazon.co.uk/StarTech-feet-Barrel-Power-Cable/dp/B003MQO96U/ref=sr_1_6?ie=UTF8&qid=1334082007&sr=8-6 , is going to be ok for the pineapple?
Hello,
I also purchased the " M Barrel" the only thing putting me off a bit is the dimensions, mine said 0,9mm and your says "OD:5.50, ID: 2.10".
But the M barrel must be a standard and that fit into my Mark IV.
Rgds
-
Hello Kavenbert,
Thanks for the suggestion.
I tried out what you suggested and tried several variation of it but with no luck
But thanks for pointing this out
Rgds
-
I guess the issue is that the E398 are not supported as it is not in the list from Darren.
I guess Amazon got me. As said I ordered the E353 ( it also says that on package )but the pineapple recongnize it as teh E398.
So i Guess the lesson learned is not to buy the E353
I will buy a E173 as it seems to work for the others.
Thanks
-
I was just looking under Darrens list and I found this for E353
I am just wondering witch product ID I should use ? the 0f01 or the 14db or a mix ?
and also why is it when I do lsusb showing me the 1506 ?
#######################################################
# Huawei E353 (3.se)
#
# Contributor: Ulf Eklund
DefaultVendor= 0x12d1
DefaultProduct=0x1f01
TargetVendor= 0x12d1
TargetProduct= 0x14db
MessageContent="55534243123456780000000000000a11062000000000000100000000000000"
# Driver is cdc_ether
NoDriverLoading=1
-
in the above script, the line that says
uci set network.wan2.apn=gprs.swisscom.ch
should be
uci set network.wan2.apn=internet
yes I updated that ............. rebooted but it did not change anything
not working
-
Hello,
When I do the ls /dev/ttyUSB* I get the :
/dev/ttyUSB0
/dev/ttyUSB1
/dev/ttyUSB2
/dev/ttyUSB3
I am using o2 and the APN is "internet"
Rgds
USB HUB
in WiFi Pineapple Mark IV
Posted
Thanks for the info