4xle Posted June 18, 2023 Share Posted June 18, 2023 Hi, I had recently both a Wi Fi pineapple. I was successfully able to flash the device once. After a few days of tinkering, the device firmware got corrupted out of the blue. I followed the factory reset instructions in the official documentation and followed by the normal setup procedure. However when i get to the flashing firmware part in the normal setup i run into one of the two error. - The flashing of the firmware never goes through and the led shows steady red (1/10) - The uploading the firmware (upgrade-2.1.3,upgrade-2.1.2) automatically or manually i get "Upgrade filesum mismatch" Could you help me resolve this issue. P.S. I have checked the file hashes. They are fine. Best, Akhil Link to comment Share on other sites More sharing options...
DramaKing Posted June 18, 2023 Share Posted June 18, 2023 Contact support. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.