TicToc Posted November 1, 2019 Posted November 1, 2019 Hi all, After receiving my Bash Bunny and after reading docs on this forum and in others, I started playing with it and found it awesome. Needing to play with Metasploit I decided to update my firmware to the latest one (From 1.0 to 1.6) I followed exactly what was described and used bunny updater, but after many tries, BB want update and stay on firmware 1.0_xxx I decided to follow the Unbrick guide in this forum ( https://forums.hak5.org/topic/42048-ultimate-bash-bunny-unbricking-guide/) to reset my BB and start from scratch. After doing Step 4 and Step 5 (it means changing the switch position) my bash bunny completed the operation but when I did the step 7 (unplug and re-plug) my BB now stay in solid green state and does not do anything other. I tried many manipulations, nothing worked for me. Can you please help. Thanks a lot Regards
PurpleTeam Posted November 5, 2019 Posted November 5, 2019 @TicToc Does it stay solid green after doing a factory reset, too? It does for me.
TicToc Posted November 5, 2019 Author Posted November 5, 2019 Hi @PurpleTeam Yes, after a factory reset. I cannot anymore do any factory reset or upgrade, ... because when i plug it to the usb port its light up green and stay green all the time. it does not flash up (red and blue) or change the color.
PurpleTeam Posted November 7, 2019 Posted November 7, 2019 I ended up doing the following steps below: 1. Reformat the Bash Bunny. 2. Do a factory reset: https://docs.hak5.org/hc/en-us/articles/360023739914-Factory-Reset. 3. Download the ch_fw_1.6_305.tar.gz firmware - or whatever firmware version you need - from: https://downloads.hak5.org/bunny.  Put the tar.gz on the Bash Bunny, but don't unzip the file. 4. Safely eject the Bash Bunny and let the firmware update complete. 5. Once this has been completed, you can download and copy over the Bash Bunny payloads from GitHub (https://github.com/hak5/bashbunny-payloads) and/or install the .deb tools like Impacket, Responder, etc. (https://forums.hak5.org/topic/40971-info-tools).
TicToc Posted November 7, 2019 Author Posted November 7, 2019 Hi @PurpleTeam I cannot do the step 1 and step 2 because as i explained bash bunny stay in solid green, So plug it and unplug it 3 times after green light turns off does not work ( >>> it never turns off, always stay solid green <<<) Â
TicToc Posted November 19, 2019 Author Posted November 19, 2019 Any help will be appreciated. it hurts a lot to throw this key regarding its price 😞 Thx
Irukandji Posted November 19, 2019 Posted November 19, 2019 Have you tried the irc or discord servers? https://shop.hak5.org/pages/community
Recommended Posts
Archived
This topic is now archived and is closed to further replies.