FedoraBlues Posted February 21, 2018 Share Posted February 21, 2018 Usually, after enough time and effort and reading, it is possible to solve a problem with Google's help. Not this time. My shiny new MVI has reconed, collected a Client, got the OUI of a MAC address, but I can never get the test connection to the bullitins or the modules or update to work. Could this be why? https://github.com/denartha/Fedora-WiFiPineapple-script It doesn't seem so because I'm on Fedora 27 alreadly. Any thoughts or suggestions? Here is some output: WiFi Pineapple detected. Please disconnect the WiFi Pineapple from this computer and press any key to continue with guided setup. Step 1 of 3: Select Default Gateway Default gateway reported as 192.168.6.4 Use the above reported default gateway? [Y/n]? y Step 2 of 3: Select Internet Interface Internet interface reported as eth0 Use the above reported Internet interface? [Y/n]? y Step 3 of 3: Select WiFi Pineapple Interface Please connect the WiFi Pineapple to this computer. ......[Checking] Detected WiFi Pineapple on interface eth1 Use the above detected WiFi Pineapple interface? [Y/n]? y Settings saved. gfedora@localhost ~]$ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default gateway 0.0.0.0 UG 100 0 0 eth0 default gateway 0.0.0.0 UG 20100 0 0 eth1 172.16.42.0 0.0.0.0 255.255.255.0 U 101 0 0 eth1 192.168.6.0 0.0.0.0 255.255.255.0 U 100 0 0 eth0 [gfedora@localhost ~]$ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.6.4 0.0.0.0 UG 100 0 0 eth0 0.0.0.0 172.16.42.1 0.0.0.0 UG 20100 0 0 eth1 172.16.42.0 0.0.0.0 255.255.255.0 U 101 0 0 eth1 192.168.6.0 0.0.0.0 255.255.255.0 U 100 0 0 eth0 [gfedora@localhost ~]$ [14430.491963] FINAL_REJECT: IN=eth0 OUT= MAC=01:00:5e:00:00:01:68:1c:a2:06:22:e9:08:00 SRC=192.168.6.4 DS T=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [14515.585196] FINAL_REJECT: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:c0:ca:8f:a4:b9:08:00 SRC=0.0.0.0 DST=22 4.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [14543.801715] FINAL_REJECT: IN=eth1 OUT= MAC= SRC=172.16.42.210 DST=255.255.255.255 LEN=1054 TOS=0x00 PRE C=0x00 TTL=64 ID=36031 DF PROTO=UDP SPT=1716 DPT=1716 LEN=1034 [14543.813753] FINAL_REJECT: IN=eth0 OUT= MAC= SRC=192.168.6.100 DST=224.0.0.252 LEN=51 TOS=0x00 PREC=0x00 TTL=255 ID=33379 PROTO=UDP SPT=5355 DPT=5355 LEN=31 [14544.076050] FINAL_REJECT: IN=eth0 OUT= MAC= SRC=192.168.6.100 DST=224.0.0.252 LEN=51 TOS=0x00 PREC=0x00 TTL=255 ID=33461 PROTO=UDP SPT=5355 DPT=5355 LEN=31 [14544.326076] FINAL_REJECT: IN=eth0 OUT= MAC= SRC=192.168.6.100 DST=224.0.0.252 LEN=51 TOS=0x00 PREC=0x00 TTL=255 ID=33612 PROTO=UDP SPT=5355 DPT=5355 LEN=31 [14545.076110] FINAL_REJECT: IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:6d0d:24c1:8ba4:e9bb DST=ff02:0000:0 000:0000:0000:0000:0001:0003 LEN=71 TC=0 HOPLIMIT=255 FLOWLBL=180497 PROTO=UDP SPT=5355 DPT=5355 LEN=31 [14545.326116] FINAL_REJECT: IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:6d0d:24c1:8ba4:e9bb DST=ff02:0000:0 000:0000:0000:0000:0001:0003 LEN=71 TC=0 HOPLIMIT=255 FLOWLBL=180497 PROTO=UDP SPT=5355 DPT=5355 LEN=31 [14545.500751] FINAL_REJECT: IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:6d0d:24c1:8ba4:e9bb DST=ff02:0000:0 000:0000:0000:0000:0001:0003 LEN=71 TC=0 HOPLIMIT=255 FLOWLBL=180497 PROTO=UDP SPT=5355 DPT=5355 LEN=31 [14549.493956] FINAL_REJECT: IN=eth1 OUT= MAC= SRC=172.16.42.210 DST=255.255.255.255 LEN=1054 TOS=0x00 PRE C=0x00 TTL=64 ID=37983 DF PROTO=UDP SPT=1716 DPT=1716 LEN=1034 [14555.481451] FINAL_REJECT: IN=eth0 OUT= MAC=01:00:5e:00:00:01:68:1c:a2:06:22:e9:08:00 SRC=192.168.6.4 DS T=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 [14641.030551] FINAL_REJECT: IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:c0:ca:8f:a4:b9:08:00 SRC=0.0.0.0 DST=22 4.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [14680.471091] FINAL_REJECT: IN=eth0 OUT= MAC=01:00:5e:00:00:01:68:1c:a2:06:22:e9:08:00 SRC=192.168.6.4 DS -Any help much appriciated.--- Atheros AR9271 Rev:1 [ 26.100000] device eth0 entered promiscuous mode [ 29.920000] eth0: link up (100Mbps/Full duplex) [ 30.810000] br-lan: port 1 (eth0) entered forwarding state [ 30.810000] br-lan: port 1(eth0) entered forwarding state [ 32.740000] device wlan0 entered promiscuous mode [ 32.810000] br-lan: port 1(eth0) entered forwarding state [ 32.940000] br-lan: port 2(wlan0) entered forwarding state [ 32.940000] br-lan: port 2(wlan0) entered forwarding state [ 33.000000] device wlan0-1 entered promiscuous mode [ 33.000000] br-lan: port 3(wlan0-1) entered forwarding state [ 33.010000] br-lan: port 3(wlan0-1) entered forwarding state [ 33.890000] br-lan: port 3(wlan0-1) entered disabled state [ 34.940000] br-lan: port 2(wlan0) entered forwarding state [ 35.480000] br-lan: port 3(wlan0-1) entered forwarding state [ 35.480000] br-lan: port 3(wlan0-1) entered forwarding state [ 37.480000] br-lan: port 3(wlan0-1) entered forwarding state Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.