Protagonist Posted April 15, 2012 Share Posted April 15, 2012 (edited) 100% packet loss after quickstart...cannot ping it if my life depended on it, after playin with it more, i see it wont auto connect via eth0 like my router does. so im guessing i have to connect to it manually, i tried: ifconfig eth0 172.16.42.42 (i think thats the one..although have tried 172.16.42.1 in desperation) still not luck when i run ./wp4.sh so main thing is..i cant even recognize/connect/ping pineapple? ....its probably something very simple im missing like and an eth0 config ...please reserve judgement still learning linux :$ that or i cannot connect because pineapple faulty? let me know..thanx p.s have also flashed it, upgraded frimware hoping to get somewhere..but i didnt Edited April 15, 2012 by Protagonist Quote Link to comment Share on other sites More sharing options...
Protagonist Posted April 17, 2012 Share Posted April 17, 2012 anyone have any ideas? cant seem to ping, however it should be possible because Ubuntu picks it up straight away. Just have difficulty in BT5 in vbox. also is there any advantage to running this through BT5? Quote Link to comment Share on other sites More sharing options...
barry99705 Posted April 17, 2012 Share Posted April 17, 2012 anyone have any ideas? cant seem to ping, however it should be possible because Ubuntu picks it up straight away. Just have difficulty in BT5 in vbox. also is there any advantage to running this through BT5? Only if you want to use some of the tools already in BT5. Quote Link to comment Share on other sites More sharing options...
Protagonist Posted April 22, 2012 Share Posted April 22, 2012 update* still cannot connect/ping the pineapple within backtrack5r2 vbox thru ethernet. however seems to detect pineapple automatically within ubuntu. can anyone help or have any ideas? please read above for deatails.. i.e 100% packet lost after quickstart Quote Link to comment Share on other sites More sharing options...
abxy007 Posted April 22, 2012 Share Posted April 22, 2012 First, thanks you (everyone on this thread) for your help....i finally got it configured, at least 1/2 way. I am running windows 7 and VMWARE workstation (backtrack5r2). I cleared the cache in firefox, checked the firmware of the pineapple (it's 1.1.1), pinged the shit outta the pineapple (see printout below) but I cant go to the login page (it works fine in windows7). This is the output i get.... root@bt:~# wget wifipineapple.com/wp4.sh; chmod +x wp4.sh; ./wp4.sh; firefox http://172.16.42.1/pineapple & --2012-04-22 00:10:16-- http://wifipineapple.com/wp4.sh Resolving wifipineapple.com... 69.163.250.20 Connecting to wifipineapple.com|69.163.250.20|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 3217 (3.1K) [application/x-sh] Saving to: `wp4.sh' 100%[======================================>] 3,217 --.-K/s in 0.03s 2012-04-22 00:10:17 (118 KB/s) - `wp4.sh' saved [3217/3217] [1]+ Done firefox http://172.16.42.1/pineapple Input Pineapple Netmask [or ENTER for 255.255.255.0]: Input Pineapple Network [or ENTER for 172.16.42.0/24]: Input Interface between PC and Pineapple [or ENTER for eth0]: Input Interface between PC and Internet [or ENTER for wlan0]: Input Internet Gateway [or ENTER for 192.168.1.1]: Input IP Address of Host PC [or ENTER for 172.16.42.42]: 172.16.42.1 Input IP Address of Pineapple [or ENTER for 172.16.42.1]: Pineapple connected to: eth0 Internet connection from: wlan0 Internet connection gateway: 192.168.1.1 Host Computer IP: 172.16.42.1 Pineapple IP: 172.16.42.1 Network: 172.16.42.0/24 Netmask: 255.255.255.0 IP Forwarding enabled. /proc/sys/net/ipv4/ip_forward set to 1 iptables chains and rules cleared IP Forwarding Enabled Default route removed Pineapple Default Gateway Configured PING 172.16.42.1 (172.16.42.1) 56(84) bytes of data. 64 bytes from 172.16.42.1: icmp_seq=1 ttl=64 time=0.072 ms 64 bytes from 172.16.42.1: icmp_seq=2 ttl=64 time=0.041 ms 64 bytes from 172.16.42.1: icmp_seq=3 ttl=64 time=0.042 ms --- 172.16.42.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.041/0.051/0.072/0.016 ms ICS configuration successful. Browse to http://172.16.42.1/pineapple -- Happy Hacking! [1] 14031 root@bt:~# NOTE: child process received `Goodbye', closing down root@bt:~# What am I doing wrong? Thanks again!! Quote Link to comment Share on other sites More sharing options...
barry99705 Posted April 23, 2012 Share Posted April 23, 2012 First, thanks you (everyone on this thread) for your help....i finally got it configured, at least 1/2 way. I am running windows 7 and VMWARE workstation (backtrack5r2). I cleared the cache in firefox, checked the firmware of the pineapple (it's 1.1.1), pinged the shit outta the pineapple (see printout below) but I cant go to the login page (it works fine in windows7). This is the output i get.... root@bt:~# wget wifipineapple.com/wp4.sh; chmod +x wp4.sh; ./wp4.sh; firefox http://172.16.42.1/pineapple & --2012-04-22 00:10:16-- http://wifipineapple.com/wp4.sh Resolving wifipineapple.com... 69.163.250.20 Connecting to wifipineapple.com|69.163.250.20|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 3217 (3.1K) [application/x-sh] Saving to: `wp4.sh' 100%[======================================>] 3,217 --.-K/s in 0.03s 2012-04-22 00:10:17 (118 KB/s) - `wp4.sh' saved [3217/3217] [1]+ Done firefox http://172.16.42.1/pineapple Input Pineapple Netmask [or ENTER for 255.255.255.0]: Input Pineapple Network [or ENTER for 172.16.42.0/24]: Input Interface between PC and Pineapple [or ENTER for eth0]: Input Interface between PC and Internet [or ENTER for wlan0]: Input Internet Gateway [or ENTER for 192.168.1.1]: Input IP Address of Host PC [or ENTER for 172.16.42.42]: 172.16.42.42 Input IP Address of Pineapple [or ENTER for 172.16.42.1]: Pineapple connected to: eth0 Internet connection from: wlan0 Internet connection gateway: 192.168.1.1 Host Computer IP: 172.16.42.1 Pineapple IP: 172.16.42.1 Network: 172.16.42.0/24 Netmask: 255.255.255.0 IP Forwarding enabled. /proc/sys/net/ipv4/ip_forward set to 1 iptables chains and rules cleared IP Forwarding Enabled Default route removed Pineapple Default Gateway Configured PING 172.16.42.1 (172.16.42.1) 56(84) bytes of data. 64 bytes from 172.16.42.1: icmp_seq=1 ttl=64 time=0.072 ms 64 bytes from 172.16.42.1: icmp_seq=2 ttl=64 time=0.041 ms 64 bytes from 172.16.42.1: icmp_seq=3 ttl=64 time=0.042 ms --- 172.16.42.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.041/0.051/0.072/0.016 ms ICS configuration successful. Browse to http://172.16.42.1/pineapple -- Happy Hacking! [1] 14031 root@bt:~# NOTE: child process received `Goodbye', closing down root@bt:~# What am I doing wrong? Thanks again!! You're doing it wrong... ;) I fixed what you should be inputting above in red. You need to make your laptop's ethernet address 172.16.42.42. Quote Link to comment Share on other sites More sharing options...
Mr-Protocol Posted April 23, 2012 Share Posted April 23, 2012 Should just use the defaults. Enter all the way through. Quote Link to comment Share on other sites More sharing options...
abxy007 Posted April 25, 2012 Share Posted April 25, 2012 You're doing it wrong... ;) I fixed what you should be inputting above in red. You need to make your laptop's ethernet address 172.16.42.42. Thanks..I took your advice and this is what i got..(keep in mind running backtrack5r2 on VMstation, wlan0 = alfa 36h connected to my router via wifi and the network settings in vmware are disconnected).I also tried entering all defaults (just keep hitting enter all the way down) and it still gives me the same results....100% packet loss...help please!! wget wifipineapple.com/wp4.sh; chmod +x wp4.sh; ./wp4.sh; firefox http://172.16.42.1/pineapple & --2012-04-25 16:16:24-- http://wifipineapple.com/wp4.sh Resolving wifipineapple.com... 69.163.250.20 Connecting to wifipineapple.com|69.163.250.20|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 3217 (3.1K) [application/x-sh] Saving to: `wp4.sh' 100%[======================================>] 3,217 --.-K/s in 0.003s 2012-04-25 16:16:24 (1.20 MB/s) - `wp4.sh' saved [3217/3217] Input Pineapple Netmask [or ENTER for 255.255.255.0]: Input Pineapple Network [or ENTER for 172.16.42.0/24]: Input Interface between PC and Pineapple [or ENTER for eth0]: Input Interface between PC and Internet [or ENTER for wlan0]: Input Internet Gateway [or ENTER for 192.168.1.1]: Input IP Address of Host PC [or ENTER for 172.16.42.42]: 172.16.42.42 Input IP Address of Pineapple [or ENTER for 172.16.42.1]: Pineapple connected to: eth0 Internet connection from: wlan0 Internet connection gateway: 192.168.1.1 Host Computer IP: 172.16.42.42 Pineapple IP: 172.16.42.1 Network: 172.16.42.0/24 Netmask: 255.255.255.0 IP Forwarding enabled. /proc/sys/net/ipv4/ip_forward set to 1 iptables chains and rules cleared IP Forwarding Enabled Default route removed Pineapple Default Gateway Configured PING 172.16.42.1 (172.16.42.1) 56(84) bytes of data. From 172.16.42.42 icmp_seq=1 Destination Host Unreachable From 172.16.42.42 icmp_seq=2 Destination Host Unreachable From 172.16.42.42 icmp_seq=3 Destination Host Unreachable --- 172.16.42.1 ping statistics --- 3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 1999ms , pipe 3 Browse to http://172.16.42.1/pineapple -- Happy Hacking! [1] 6874 Quote Link to comment Share on other sites More sharing options...
mreidiv Posted April 25, 2012 Share Posted April 25, 2012 (edited) Thanks..I took your advice and this is what i got..(keep in mind running backtrack5r2 on VMstation, wlan0 = alfa 36h connected to my router via wifi and the network settings in vmware are disconnected).I also tried entering all defaults (just keep hitting enter all the way down) and it still gives me the same results....100% packet loss...help please!! wget wifipineapple.com/wp4.sh; chmod +x wp4.sh; ./wp4.sh; firefox http://172.16.42.1/pineapple & --2012-04-25 16:16:24-- http://wifipineapple.com/wp4.sh Resolving wifipineapple.com... 69.163.250.20 Connecting to wifipineapple.com|69.163.250.20|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 3217 (3.1K) [application/x-sh] Saving to: `wp4.sh' 100%[======================================>] 3,217 --.-K/s in 0.003s 2012-04-25 16:16:24 (1.20 MB/s) - `wp4.sh' saved [3217/3217] Input Pineapple Netmask [or ENTER for 255.255.255.0]: Input Pineapple Network [or ENTER for 172.16.42.0/24]: Input Interface between PC and Pineapple [or ENTER for eth0]: Input Interface between PC and Internet [or ENTER for wlan0]: Input Internet Gateway [or ENTER for 192.168.1.1]: Input IP Address of Host PC [or ENTER for 172.16.42.42]: 172.16.42.42 Input IP Address of Pineapple [or ENTER for 172.16.42.1]: Pineapple connected to: eth0 Internet connection from: wlan0 Internet connection gateway: 192.168.1.1 Host Computer IP: 172.16.42.42 Pineapple IP: 172.16.42.1 Network: 172.16.42.0/24 Netmask: 255.255.255.0 IP Forwarding enabled. /proc/sys/net/ipv4/ip_forward set to 1 iptables chains and rules cleared IP Forwarding Enabled Default route removed Pineapple Default Gateway Configured PING 172.16.42.1 (172.16.42.1) 56(84) bytes of data. From 172.16.42.42 icmp_seq=1 Destination Host Unreachable From 172.16.42.42 icmp_seq=2 Destination Host Unreachable From 172.16.42.42 icmp_seq=3 Destination Host Unreachable --- 172.16.42.1 ping statistics --- 3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 1999ms , pipe 3 Browse to http://172.16.42.1/pineapple -- Happy Hacking! [1] 6874 did you make your own vm or download the one from backtrack? check you network connections in your vm settings are you Nat, bridged etc. also you do not need to run the full command "wget wifipineapple.com/wp4.sh; chmod +x wp4.sh; ./wp4.sh; firefox http://172.16.42.1/pineapple & --2012-04-25 16:16:24-- http://wifipineapple.com/wp4.sh" if you have ran it once all ready you should have a copy of the file wp4.sh now some where so all you need to do is find it and issue sh wp4.sh Edited April 25, 2012 by mreidiv Quote Link to comment Share on other sites More sharing options...
abxy007 Posted April 25, 2012 Share Posted April 25, 2012 did you make your own vm or download the one from backtrack? check you network connections in your vm settings are you Nat, bridged etc. also you do not need to run the full command "wget wifipineapple.com/wp4.sh; chmod +x wp4.sh; ./wp4.sh; firefox http://172.16.42.1/pineapple & --2012-04-25 16:16:24-- http://wifipineapple.com/wp4.sh" if you have ran it once all ready you should have a copy of the file wp4.sh now some where so all you need to do is find it and issue sh wp4.sh Thanks for the quick response 1 Running VMware Workstation 8.0.2 - downloaded from their website (wmware.com or whatever the hell it is) 2 Network settings in Vmware? I tried both (bridged)(Replicate Physical network connection state box not checked) and disconnected (meaning I used my wlan0 (alfa36h card) to connect to my home network 3 The wp4.sh file is in my root folder. I notice the more you run the command, the more files it produces (meaning wp4.sh-1, wp4.sh-2 etc.) so i would just delete them and start over fresh. Quote Link to comment Share on other sites More sharing options...
mreidiv Posted April 27, 2012 Share Posted April 27, 2012 Thanks for the quick response 1 Running VMware Workstation 8.0.2 - downloaded from their website (wmware.com or whatever the hell it is) 2 Network settings in Vmware? I tried both (bridged)(Replicate Physical network connection state box not checked) and disconnected (meaning I used my wlan0 (alfa36h card) to connect to my home network 3 The wp4.sh file is in my root folder. I notice the more you run the command, the more files it produces (meaning wp4.sh-1, wp4.sh-2 etc.) so i would just delete them and start over fresh. In response to your answers 1. I was asking if you downloaded your Backtrack vm from Backtrack's website or if you made it your self? 2. You VM settings on the network settings should be NAT 3. Quit running the full command "wget wifipineapple.com/wp4.sh; chmod +x wp4.sh; ./wp4.sh; firefox http://172.16.42.1/pineapple & --2012-04-25 16:16:24-- http://wifipineapple.com/wp4.sh" You only need to run this command form your root folder "sh wp4.sh" without quotes. That is why you keep getting duplicates. [wget wifipineapple.com/wp4.sh] Downloads the script to you computer [chmod +x wp4.sh] Sets executable permissions to the script you downloaded in the previous part of the command. [./wp4.sh] Starts the command [firefox http://172.16.42.1/pineapple] Opens firefox to the pineapples web gui [http://wifipineapple.com/wp4.sh] references where to download the script from SO... What you need to do is st the network setting in you backtrack vm to NAT Make sure you are connected to the network in the vm so you can access the internet and your pineapple is fully loaded move to the root folder where your wp4.sh script is and issue sh wp4.sh Now for the questions i have. 1 where is you pineapple connected to for internet. [wireless, Ethernet]? 2 where is you computer connected for internet. Quote Link to comment Share on other sites More sharing options...
abxy007 Posted April 28, 2012 Share Posted April 28, 2012 (edited) Never-mind.....GOT it working in Backtrack 5r2 and in windows 7. I just simply downloaded a fresh copy of the Backtrack 5 and the first time, hit enter for the defaults during setup and bam!!! Im in. Again thanks guys for all your help!!! On to dns spoofing... Side Note: Is is better to run the pineapple in WIndows 7 and do my wiresharking (and other stuff) in backtrack or keep it all on the same OS? Basically, what is the best setup? Thanks again guys for all the help (and especially being patient!!! Edited April 28, 2012 by abxy007 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.