hardcoded

I'm having some trouble returning results on firmware 1.0.1 - the module seems to capture a few URLs but will stop shortly after. I've connected my iPhone to the open access point I created and browsed a few different sites. Any troubleshooting tips would be appreciated.

I'm having the same problem: root@Pineapple:/sd/modules/SSLsplit# opkg install sslsplit Unknown package 'sslsplit'. Collected errors: * opkg_install_cmd: Cannot install package sslsplit. root@Pineapple:/sd/modules/SSLsplit# I manually checked all the dependencies just to be certain and all of the openssl dependencies are installed properly.

I was able to get a hold of support and they're sending me a new Nano.

I've tried two different SD cards and one USB stick, I continually get write errors on storage that prevent anything from working via web UI. I used a brand new SD card for this test. I did a full firmware reset (nano_factory.bin) and then upgraded to 1.1.3 via UI. I popped in the new SD card and used the format option from the interface. I installed a few modules and was up and running. Suddenly the device stops accepting clients and recon will no longer work. I checked the logs and see the write error. This has happened with 2 different SD cards (different manufacturers) and a USB stick. Please advise.