Jump to content

tld75

Active Members
  • Content Count

    10
  • Joined

  • Last visited

About tld75

  • Rank
    Hackling

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hey so i managed to make it work on a fresh VM install of UBUNTU . What has strike me is that the order in which you connect the nano, there is a way for each OS. For my settings, i need to launch the vm with nano already connected, Ubuntu will default to this as main net card and wifi won't work, then run the script, unplug the nano on step 3, plug back in, wait until its stable then finalize wp6 script and all is back to normal and connection sharing works. all bulletins loading and all running smoothly. What's next :) ?!?!? Thanks
  2. More network infos from a script i have found and ran, gives more insights. IT looks like its due to lack of wireless manager ? or the right drivers for the card. but not sure ! https://pastebin.com/q3sAutEq
  3. Thanks so much for your help @Foxtrot. ifconfig -a https://pastebin.com/JXvwVdi3 route https://pastebin.com/J83i5VaJ iwonfig https://pastebin.com/GBUti9Cm After running script. https://pastebin.com/KQdbz6ph https://pastebin.com/ZG3jRL8m https://pastebin.com/RafVvdW5 the line saying no wireless extensions doesn't seem good, let me know what you thinkmit links back to (driver for the NIC ? config ? ...) Thanks
  4. I have tried this device on: - a Macbook with VirtualBox + Kali VM (running on the USB-C/eth interface, tried with one usb connected, 2, no changes)= fail - Ubuntu VM, worked better, script running but not internet connection with nano, no bulletins loading = fail - 1 yo chromebook and installed Crouton / Xubuntu - xfce, wp6 works and connects but then shuts down all internet interfaces and i have to restart machine = fail Will try and find a PC tomorrow at work and run another test but slowly starting to loose patience ... any one can give a hand here ? thanks
  5. ...So once i restart the machine all services are up again and i can connect to web and the nano, see below. But the bulletin stil do not load ..... xenial)toor@localhost:~$ (xenial)toor@localhost:~$ /sbin/ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:40 errors:0 dropped:0 overruns:0 frame:0 TX packets:40 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:3016 (3.0 KB) TX bytes:3016 (3.0 KB) wlan0 Link encap:Ethernet HWaddr 90:2e:1c:57:df:4b inet addr:192.168.0.14 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::922e:1cff:fe57:df4b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7728 errors:0 dropped:0 overruns:0 frame:0 TX packets:6121 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:6408070 (6.4 MB) TX bytes:1101455 (1.1 MB) (xenial)toor@localhost:~$ /sbin/ifconfig | grep wlan0 wlan0 Link encap:Ethernet HWaddr 90:2e:1c:57:df:4b (xenial)toor@localhost:~$ /sbin/ifconfig | grep eth0 eth0 Link encap:Ethernet HWaddr 00:c0:ca:91:b9:d0 (xenial)toor@localhost:~$ /sbin/ifconfig eth0 Link encap:Ethernet HWaddr 00:c0:ca:91:b9:d0 inet6 addr: fe80::2c0:caff:fe91:b9d0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3 errors:0 dropped:0 overruns:0 frame:0 TX packets:18 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:138 (138.0 B) TX bytes:2804 (2.8 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:40 errors:0 dropped:0 overruns:0 frame:0 TX packets:40 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:3016 (3.0 KB) TX bytes:3016 (3.0 KB) wlan0 Link encap:Ethernet HWaddr 90:2e:1c:57:df:4b inet addr:192.168.0.14 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::922e:1cff:fe57:df4b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7919 errors:0 dropped:0 overruns:0 frame:0 TX packets:6358 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:6432703 (6.4 MB) TX bytes:1138088 (1.1 MB) (xenial)toor@localhost:~$ ping yahoo.com PING yahoo.com (98.139.180.149) 56(84) bytes of data. 64 bytes from ir1.fp.vip.bf1.yahoo.com (98.139.180.149): icmp_seq=1 ttl=52 time=93.8 ms 64 bytes from ir1.fp.vip.bf1.yahoo.com (98.139.180.149): icmp_seq=2 ttl=52 time=90.7 ms 64 bytes from ir1.fp.vip.bf1.yahoo.com (98.139.180.149): icmp_seq=3 ttl=52 time=98.6 ms 64 bytes from ir1.fp.vip.bf1.yahoo.com (98.139.180.149): icmp_seq=4 ttl=52 time=91.2 ms 64 bytes from ir1.fp.vip.bf1.yahoo.com (98.139.180.149): icmp_seq=5 ttl=52 time=92.8 ms 64 bytes from ir1.fp.vip.bf1.yahoo.com (98.139.180.149): icmp_seq=6 ttl=52 time=215 ms 64 bytes from ir1.fp.vip.bf1.yahoo.com (98.139.180.149): icmp_seq=7 ttl=52 time=238 ms 64 bytes from ir1.fp.vip.bf1.yahoo.com (98.139.180.149): icmp_seq=8 ttl=52 time=98.3 ms 64 bytes from ir1.fp.vip.bf1.yahoo.com (98.139.180.149): icmp_seq=9 ttl=52 time=180 ms 64 bytes from ir1.fp.vip.bf1.yahoo.com (98.139.180.149): icmp_seq=10 ttl=52 time=203 ms ^C --- yahoo.com ping statistics --- 10 packets transmitted, 10 received, 0% packet loss, time 9013ms rtt min/avg/max/mdev = 90.735/140.488/238.854/58.189 ms (xenial)toor@localhost:~$ wget wifipineapple.com/nano URL transformed to HTTPS due to an HSTS policy --2017-10-01 01:40:42-- https://wifipineapple.com/nano Resolving wifipineapple.com (wifipineapple.com)... 216.239.38.21, 216.239.32.21, 216.239.34.21, ... Connecting to wifipineapple.com (wifipineapple.com)|216.239.38.21|:443... connected. HTTP request sent, awaiting response... 302 Found Location: /pages/setup#nano [following] URL transformed to HTTPS due to an HSTS policy --2017-10-01 01:40:43-- https://wifipineapple.com/pages/setup Connecting to wifipineapple.com (wifipineapple.com)|216.239.38.21|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 25448 (25K) [text/html] Saving to: 'nano' nano 100%[============================================================>] 24.85K --.-KB/s in 0.02s 2017-10-01 01:40:43 (1.40 MB/s) - 'nano' saved [25448/25448] (xenial)toor@localhost:~$
  6. THanks @Foxtrot, forcing the root mode did the trick but then i run into another another issue, no internet traffic at all on either interfaces. that's the whole process i follow when launching the script, the running ifconfig, .... Any ideas ? thanks a lot. (xenial)toor@localhost:~$ sudo passwd -u root [sudo] password for toor: passwd: password expiry information changed. (xenial)toor@localhost:~$ sudo ./wp6.sh ___ __ ___ __ __ ___ | | | |__ | |__) | |\ | |__ /\ |__) |__) | |__ |/\| | | | | | | \| |___ /~~\ | | |___ |___ v6.5 Saved Settings: Share Internet connection from wlan0 to WiFi Pineapple at eth0 through default gateway 192.168.0.1 [C]onnect using saved settings [G]uided setup (recommended) [M]anual setup [A]dvanced IP settings [Q]uit Step 1 of 3: Select Default Gateway Default gateway reported as 192.168.0.1 Use the above reported default gateway? [Y/n]? y Step 2 of 3: Select Internet Interface Internet interface reported as wlan0 Use the above reported Internet interface? [Y/n]? y Step 3 of 3: Select WiFi Pineapple Interface Please connect the WiFi Pineapple to this computer. .........[Checking] Detected WiFi Pineapple on interface eth0 Use the above detected WiFi Pineapple interface? [Y/n]? y Settings saved. Saved Settings: Share Internet connection from wlan0 to WiFi Pineapple at eth0 through default gateway 192.168.0.1 [C]onnect using saved settings [G]uided setup (recommended) [M]anual setup [A]dvanced IP settings [Q]uit Detecting WiFi Pineapple...........found. _ . ___ \||/ ( _ )_ <--> [___] <--> ,<><>, (_ _(_ ,) \___\ '<><>' Browse to http://172.16.42.1:1471 (xenial)toor@localhost:~$ /sbin/ifconfig eth0 Link encap:Ethernet HWaddr 00:c0:ca:91:b9:d0 inet addr:172.16.42.236 Bcast:172.16.42.255 Mask:255.255.255.0 inet6 addr: fe80::2c0:caff:fe91:b9d0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:20 errors:0 dropped:0 overruns:0 frame:0 TX packets:30 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1978 (1.9 KB) TX bytes:4624 (4.6 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:48 errors:0 dropped:0 overruns:0 frame:0 TX packets:48 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:3764 (3.7 KB) TX bytes:3764 (3.7 KB) wlan0 Link encap:Ethernet HWaddr 90:2e:1c:57:df:4b inet addr:192.168.0.14 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::922e:1cff:fe57:df4b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:20446 errors:0 dropped:0 overruns:0 frame:0 TX packets:11199 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:23703561 (23.7 MB) TX bytes:2050182 (2.0 MB) (xenial)toor@localhost:~$ /sbin/ifconfig | grep eth0 eth0 Link encap:Ethernet HWaddr 00:c0:ca:91:b9:d0 (xenial)toor@localhost:~$ /sbin/ifconfig | grep wlan0 wlan0 Link encap:Ethernet HWaddr 90:2e:1c:57:df:4b (xenial)toor@localhost:~$ ping yahoo.com ping: unknown host yahoo.
  7. the routes look correct: (xenial)toor@localhost:~$ ip route default via 192.168.0.1 dev wlan0 172.16.42.0/24 dev eth0 proto kernel scope link src 172.16.42.236 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.14 (xenial)toor@localhost:~$ I am baffled by why its not working ..... ANyone can shed lights here ? thanks a lot. T.
  8. I am on linux Xubuntu on a chromebook and all is configured fine, but in the end i get an error from teh script about iptable ( ./wp6.sh: line 282: iptables: command not found) The shared connection does not want to work, gutted, i thought it would be easier, anyone has similar config and had made it run ? keep on trying ... Network Config after wp6.sh: (xenial)toor@localhost:~$ ./wp6.sh This WiFi Pineapple Connection script requires root. [sudo] password for toor: _ ___ _______ ____ _ __ | | / (_) ____(_) / __ \(_)___ ___ ____ _____ ____ / /__ | | /| / / / /_ / / / /_/ / / __ \/ _ \/ __ '/ __ \/ __ \/ / _ \ | |/ |/ / / __/ / / / ____/ / / / / __/ /_/ / /_/ / /_/ / / __/ |__/|__/_/_/ /_/ /_/ /_/_/ /_/\___/\__,_/ .___/ .___/_/\___/ /_/ /_/ v6.5 Saved Settings: Share Internet connection from wlan0 to WiFi Pineapple at eth0 through default gateway 192.168.0.1 [C]onnect using saved settings [G]uided setup (recommended) [M]anual setup [A]dvanced IP settings [Q]uit Detecting WiFi Pineapple......found. _ . ___ \||/ ( _ )_ <--> [___] <--> ,<><>, (_ _(_ ,) \___\ '<><>' ./wp6.sh: line 282: iptables: command not found ./wp6.sh: line 283: iptables: command not found ./wp6.sh: line 284: iptables: command not found ./wp6.sh: line 285: iptables: command not found ./wp6.sh: line 286: iptables: command not found Browse to http://172.16.42.1:1471 Network: (xenial)toor@localhost:~$ /sbin/ifconfig eth0 Link encap:Ethernet HWaddr 00:c0:ca:91:b9:d0 inet addr:172.16.42.42 Bcast:172.16.42.255 Mask:255.255.255.0 inet6 addr: fe80::2c0:caff:fe91:b9d0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1643 errors:0 dropped:0 overruns:0 frame:0 TX packets:1410 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:557653 (557.6 KB) TX bytes:411311 (411.3 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:148 errors:0 dropped:0 overruns:0 frame:0 TX packets:148 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:10948 (10.9 KB) TX bytes:10948 (10.9 KB) wlan0 Link encap:Ethernet HWaddr 90:2e:1c:57:df:4b inet addr:192.168.0.14 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::922e:1cff:fe57:df4b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:611232 errors:0 dropped:0 overruns:0 frame:0 TX packets:131110 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:838063398 (838.0 MB) TX bytes:18508899 (18.5 MB) (xenial)toor@localhost:~$
  9. Defo doing something wrong, need expert advice. Running Ubuntu VM via VirtualBox on tops of MAcOS10.12 on a Macbook. Here is the config i get after runnign the script. thanks for any help. toor@toor-VirtualBox:~$ ifconfig -a enp0s3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 10.0.2.15 netmask 255.255.255.0 broadcast 10.0.2.255 inet6 fe80::cdb8:2205:198d:ce05 prefixlen 64 scopeid 0x20<link> ether 08:00:27:12:10:66 txqueuelen 1000 (Ethernet) RX packets 10097 bytes 9924744 (9.9 MB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 5378 bytes 586306 (586.3 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 enx00c0ca91b9d0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 172.16.42.236 netmask 255.255.255.0 broadcast 172.16.42.255 inet6 fe80::a8e8:d79b:98a7:b8fc prefixlen 64 scopeid 0x20<link> ether 00:c0:ca:91:b9:d0 txqueuelen 1000 (Ethernet) RX packets 382 bytes 84186 (84.1 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 402 bytes 120686 (120.6 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 519 bytes 37923 (37.9 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 519 bytes 37923 (37.9 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 toor@toor-VirtualBox:~$ ifconfig | grep en enp0s3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::cdb8:2205:198d:ce05 prefixlen 64 scopeid 0x20<link> ether 08:00:27:12:10:66 txqueuelen 1000 (Ethernet) enx00c0ca91b9d0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::a8e8:d79b:98a7:b8fc prefixlen 64 scopeid 0x20<link> ether 00:c0:ca:91:b9:d0 txqueuelen 1000 (Ethernet) inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) toor@toor-VirtualBox:~$ ifconfig | grep eth ether 08:00:27:12:10:66 txqueuelen 1000 (Ethernet) ether 00:c0:ca:91:b9:d0 txqueuelen 1000 (Ethernet)
×
×
  • Create New...