WiFiJuice
-
Posts
62 -
Joined
-
Days Won
1
Posts posted by WiFiJuice
-
-
-
This videos are for the LAN Turtle (actually the best ones from Darren I seen), however I find them essential for setting up AutoSSH. Everyone on this forum should check them out:
and-
1
-
-
Maybe you're not the only one with a WiFi Pineapple in your area :)
-
Hi, my Wifi Long Range Booster from the Hakshop doesn't work. I get a better strength using Wifite and Alfa wireless card without the long range WiFi booster. The RX and Power LED are lighten up, the TX is off. There is an option "--tx TX" on Wifite. Do I have to specify the strenght for it to work? I tried the command "wifite --mac --tx 30" but it still doesn't work. Is it broken or do I have to do anything else?
-
It's because you have the module Occupineapple on as stated above. Happened to me too before. Provide it with a list of BSSIDs (BSSID is the MAC address, not the SSID name) and it will broadcast only thoes. Otherwise it will spam with non sense characters. I simple deleted that module and it went back to normal. I didn't know I could provide it with a list then. Now I know :)
-
Should the 2 microUSB go to the 2 Pineapple Juice 15000s and the regular USB to the Macbook? And what if I want to use the Ethernet cable? I don't have any AC so I have to use 2 batteries. There's no video explaining and it doesn't work.
I don't have a Mac so no good way to test but this thread from the NANO forums may be helpful:
https://forums.hak5.org/index.php?/topic/37483-ics-on-a-mac-a-future-resilient-howto/
-
How much are you willing to pay for it :-P ?
Lol :) I rather pay you for 1 hour consultation over Skype... DM pls.
-
Using the -i parameter you can specify the device, instead of letting it scan for one. Try that, see what happens.
Tried it, it can't find wlan0 or wlan1 since my NANO gets the eth1 interface...
-
For some reason i cant get wifite to work. when i type wifite it says:
[ + ] scanning for wireless devices...
[ ! ] no wireless interfaces were found.
[ ! ] you need to plug in a wifi device or install drivers.
Does anyone know what i can do to fix this ?
I have exactly the same problem!
It works with the Alfa-dongle but not with the Pineapple NANO. I'm using VMware and Kali Linux. The wp6.sh gives my NANO : eth1. I don't think that Wifite understands that this is in fact a Wifi interface. How do I change it to wlan1 since the Wifite is so stupid?
-
@AlfaAlfa: Sorry but I did not use any of your code, I just started from scratch to build it.
@WiFiJuice: the submission process is not ready yet, that's why there is a little delay before the module is available as bored369 said. It will be available soon.
I'm working on a module to capture handshakes but it will be a separated module.
Ok this is really a SUPER LIKE if you can make a module to capture a handshake. I'm learning Wifite right now and it's really cool! Using a Alfa since my NANO doesn't work with VMware + Kali + Wifite (Interface not found error), but the Alfa USB-dongle does.
-
How do I make wp6.sh (latest update) give my Pineapple wlan0 or wlan1 instead of eth1? Wifite is so stupid so it doesn't understand that I have connected a WiFi interface otherwise. And as I understand it the Pineapple is not able to capturing the WiFi handshake by its own and Wifite is needed... I have a feeling that this question will remain unanswered and right now I really feel I wasted my money on both the NANO and the TETRA since non of them can crack the WiFi passwords and that's what I tough they could do!
Update to the latest version of the script
wget www.wifipineapple.com/wp6.sh chmod wp6.sh +x sudo ./wp6.sh
The new version contains error handling for the issues with overzealous network managers. The guided mode plays nice with 'em and uses iproute2 instead of ifconfig for more consistent results. Will look like this:▄ ▄ ▄█ ▄████ ▄█ █ ▄▄ ▄█ ▄ ▄███▄ ██ █ ▄▄ █ ▄▄ █ ▄███▄ █ █ ██ █▀ ▀ ██ █ █ ██ █ █▀ ▀ █ █ █ █ █ █ █ █▀ ▀ █ ▄ █ ██ █▀▀ ██ █▀▀▀ ██ ██ █ ██▄▄ █▄▄█ █▀▀▀ █▀▀▀ █ ██▄▄ █ █ █ ▐█ █ ▐█ █ ▐█ █ █ █ █▄ ▄▀ █ █ █ █ ███▄ █▄ ▄ █ █ █ ▐ █ ▐ █ ▐ █ █ █ ▀███▀ █ █ █ ▀ ▀███▀ ▀ ▀ ▀ ▀ █ ██ █ ▀ ▀ v6.4 Saved Settings: Share Internet connection from wlan0 to WiFi Pineapple at eth1 through default gateway 192.168.1.1 Since this is the first time running the WP6 Internet Connection Sharing script, Guided setup is recommended to save initial configuration. Subsequent sessions may be quickly connected using saved settings. [C]onnect using saved settings [G]uided setup (recommended) [M]anual setup [A]dvanced IP settings [Q]uit G WiFi Pineapple detected. Please disconnect the WiFi Pineapple from this computer and press any key to continue with guided setup. Step 1 of 3: Select Default Gateway Default gateway reported as 10.73.31.1 Use the above reported default gateway? [Y/n]? Step 2 of 3: Select Internet Interface Internet interface reported as eth0 Use the above reported Internet interface? [Y/n]? Step 3 of 3: Select WiFi Pineapple Interface Please connect the WiFi Pineapple to this computer. ..............[Checking] Detected WiFi Pineapple on interface eth17 Use the above detected WiFi Pineapple interface? [Y/n]? Settings saved. Saved Settings: Share Internet connection from eth0 to WiFi Pineapple at eth17 through default gateway 10.73.31.1 [C]onnect using saved settings [G]uided setup (recommended) [M]anual setup [A]dvanced IP settings [Q]uit Detecting WiFi Pineapple............found. _ . ___ \||/ ( _ )_ <--> [___] <--> ,<><>, (_ _(_ ,) \___\ '<><>' Browse to http://172.16.42.1:1471 -
There is no module which does it at the moment but as I said there are tools such as Wifite or airodump-ng which you could use to capture the handshakes.
Trying to use Wifite. Connected my NANO to my Kali Linux instead of my Android in order to do that. Got the wp6.sh sharing Internet and it works to login to the portal.
However Wifite says:
[!] no wireless interfaces were found.
[!] you need to plug in a wifi device or install drivers.
I got my Pineapple to eth1. How do I change it to wlan1 so Wifite understands that this is in fact my wireless interface? (connected over USB ethernet). I'm using Kali Linux from VMware Fusion Pro for Mac.
-
There is no module which does it at the moment but as I said there are tools such as Wifite or airodump-ng which you could use to capture the handshakes.
Then what's the difference of using this module that to simply browsing to the site online and paste the hashes? It's the combo of (1) Deauth, (2) Getting the handshake and (3) send it for cracking online without needing a directory and process power that noob Pineapple users would want... At least I do... I can't find the module for my Pineapple to download by the way.
-
That's way to complicated for me at this point. What modules does capture the handshake today?
Yes, it's possible
As Foxtrot said, have a look at the video and then you can develop a module which will do that. -
You could learn about the modules and the tools needed to do such thing and create a module for it
What modules does such a thing and where do I learn about them?
-
Haha, no it does not do everything automatically
The purpose of this module is to submit data to www.onlinehashcrack.com only but the usage is really simple: just copy-past hashes and they will be submitted. Same for wpa handshake, just supply the path to the file.The capture of the handshake can be done with Wifite or airodump-ng.
Is it possible to make a module that captures the handshake and sends it for cracking online by automation?
-
Well, maybe because I don't have time to develop modules for everyone
Remember, I have a full-time job aside and I'm developing for my pleasure, during my free time.But if you want... have a look below in my signature
Sure, you just got 50 CHF donated :) Hope you find some time for it now. Thanks!
-
1
-
-
The submit process is not done yet fo the NANO / TETRA but Seb is working on it :)
The problem I see with your module is that it depends on a binary which have to be compiled by the user before being able to use the module.
Other stuff I see:
1) you're calling installDependency("uploadwpa") to install your binary. This will not work as the function uses opkg update && opkg install to install binary from the repository but uploadwpa is not a standard OpenWrt binary (as you've develop it yourself) and is not in the repository.
2) Same with exec("opkg remove uploadwpa") which will not work as this is only for binary which have been installed with opkg.
3) Same with checkDependency("uploadwpa"), which will test is the binary is in the opkg list-installed.
And finally, modules cannot come with pre-compile binaries, it's against rules set for the pineapple submission process. So your binary will have to be approved and validated to be included in the repository so that you could use then the standard API methods such as checkDependency or installDependency. This means that you would have to create a standard OpenWrt makefile for it.
What I suggest is that you use python, perl or shell script to replace your uploadwpa.
Whistle Master - Why don't you please go ahead and approve the module or finalize it yourself and credit AlfAlfa for it? Does it have to be sooooo hard to make things simple on the Nano/Tetra? I believe that this would be one of the very best modules since you get the WiFi password mailed to you directly once cracked online, and you don't need to use your own directories etc. PLEASE MAKE IT WORK :) Thanks!
-
No, that's not a real module. Only some code that might work in a module. I would like to have it as a real working module to my NANO and TETRA. Anyone up for fixing this? I'm sure more than me would find it very useful.
I thought I read somewhere on the forums that someone was working on this already. If I find it I'll edit my post with the link.
Edit:
According to this post it looks like you found it.
-
I would really use a module that made me skip using a directory to crack the wifi hashes, such as onlinehashcrack.com.
There is a lot of onlinehashcrack.com scripts on GitHub that will make it easier to develop this module. It will only need to send my e-mail and the hash or
Wifi WPA(2) to that site, and it will mail me once it's ready.
Can anyone that made modules before do this please? Really appreciated!
-
1
-
-
Anyone up for building this module to crack passwords without any directory via onlinehashcrack.com? Would really be helpful... Searching GitHub for onlinehashcrack.com a lot comes up that can be used. Never built any module, otherwise I would try to do it myself.
Yea that doesn't sound too bad it's not even using TLS/SSL! Should be a sinch :)
Just
GET / HTTP/1.1 Host: onlinehashcrack.com
Then aPOST /wifi-wpa-rsna-psk-crack.php HTTP/1.1 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Firefox/38.0 Iceweasel/38.5.0 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-US,en;q=0.5 Accept-Encoding: gzip, deflate Referer: http://www.onlinehashcrack.com/ Connection: keep-alive Content-Type: multipart/form-data; boundary=---------------------------12414623831213293040140603178 Content-Length: 4571534 -----------------------------12414623831213293040140603178 Content-Disposition: form-data; name="emailWpa" youremail@yourdomain.com -----------------------------12414623831213293040140603178 Content-Disposition: form-data; name="wpaFile"; filename="capturefile.cap" Content-Type: application/vnd.tcpdump.pcap ----- data goes here ---- \r\n\r\n
Then ungzip the response and check that it was successfully uploaded or just assume it was and see if you get an email :)Also do the hash form as well, or instead if it's easier: (where you can enter up to 10 hashes instead of a capture file, can you write a WPA handshake like that though?)
POST /hash-cracking.php HTTP/1.1 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Firefox/38.0 Iceweasel/38.5. ---yada yada--- textareaHashes=hash-1\r\nhash-2\r\nhash-3\r\netc-etc-etc&emailHashes=youremail@yourdomain \r\n\r\n
Yeehee! -
The TETRA already includes four onboard boosters and ships with 5 dBi SMA antennas. Like I said -- it's a powerhouse. Try the stock config before upgrading -- I think you'll be pleased :)
Thanks! But I really want it maxed out. Bought 2 NANO devices already, so I want this one to be better if I buy it :) If I really want it's possible to run it with 9dBi antennas with the included 29 dBm amplifiers right? Souce: http://hakshop.myshopify.com/products/long-range-wifi-kit. I was thinking of this antennas: http://www.linksys.com/us/p/P-WRT004ANT/
-
What is the best antennas and boosters that stack with this for maxing it out? Links please :)
-
Will it stack with 2 x "Long Range WiFi ALFA 800 mW 2.4 GHz signal booster" for even better range and strength? And maybe 2 x boosters for 5 GHz if there is any?
As Foxtrot said, have a look at the video and then you can develop a module which will do that.
The purpose of this module is to submit data to www.onlinehashcrack.com only but the usage is really simple: just copy-past hashes and they will be submitted. Same for wpa handshake, just supply the path to the file.
Remember, I have a full-time job aside and I'm developing for my pleasure, during my free time.
Spanish Keyboard Layout
in Bash Bunny
Posted
Can anyone help me mod the se.json file? Really need to run a payload and it doesn't work since the Swedish file uploaded to https://github.com/hak5/bashbunny-payloads/tree/master/languages is wrong, so the "~" or "\" doesn't work...