Jump to content

Skull

Active Members
  • Content Count

    8
  • Joined

  • Last visited

About Skull

  • Rank
    Hackling
  1. I tried it in the exact order, reverse order, random order, and no order....no dice. Android Version 4.4.2
  2. I do not have another android device. I bought this one for the sole purpose of using it with the nano because USB internet sharing doesn't work on my mac.
  3. BTW: Happy New Year! Thanks again for such quick response during the holiday. You guys are awesome. Here is what is says when I run dmesg with tethering on root@Pineapple:~# dmesg [ 0.000000] Linux version 3.18.19 (sebkinne@buildtop) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46581) ) #86 Tue Dec 22 01:14:58 CET 2015 [ 0.000000] MyLoader: sysp=8a14b024, boardp=44b65156, parts=b69f8d32 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) [ 0.000000] SoC: Atheros AR9330 rev 1 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 04000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x03ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x03ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff] [ 0.000000] On node 0 totalpages: 16384 [ 0.000000] free_area_init_node: node 0, pgdat 80353cf0, node_mem_map 81000000 [ 0.000000] Normal zone: 128 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 16384 pages, LIFO batch:3 [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: board=PINEAPPLE-NANO console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 60944K/65536K available (2462K kernel code, 123K rwdata, 528K rodata, 268K init, 188K bss, 4592K reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:51 [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) [ 0.080000] pid_max: default: 32768 minimum: 301 [ 0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.100000] NET: Registered protocol family 16 [ 0.100000] MIPS: machine is WiFi Pineapple NANO [ 0.370000] Switched to clocksource MIPS [ 0.370000] NET: Registered protocol family 2 [ 0.380000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.380000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.390000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.390000] TCP: reno registered [ 0.400000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.410000] NET: Registered protocol family 1 [ 0.410000] PCI: CLS 0 bytes, default 32 [ 0.410000] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.430000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.430000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc. [ 0.440000] msgmni has been set to 119 [ 0.450000] io scheduler noop registered [ 0.450000] io scheduler deadline registered (default) [ 0.460000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.460000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART [ 0.470000] console [ttyATH0] enabled [ 0.480000] bootconsole [early0] disabled [ 0.490000] m25p80 spi0.0: found mx25l12805d, expected m25p80 [ 0.490000] m25p80 spi0.0: mx25l12805d (16384 Kbytes) [ 0.510000] 5 tp-link partitions found on MTD device spi0.0 [ 0.510000] Creating 5 MTD partitions on "spi0.0": [ 0.510000] 0x000000000000-0x000000020000 : "u-boot" [ 0.520000] 0x000000020000-0x000000134358 : "kernel" [ 0.530000] 0x000000134358-0x000000ff0000 : "rootfs" [ 0.530000] mtd: device 2 (rootfs) set to be root filesystem [ 0.540000] 1 squashfs-split partitions found on MTD device rootfs [ 0.540000] 0x000000d80000-0x000000ff0000 : "rootfs_data" [ 0.550000] 0x000000ff0000-0x000001000000 : "art" [ 0.550000] 0x000000020000-0x000000ff0000 : "firmware" [ 0.580000] libphy: ag71xx_mdio: probed [ 1.170000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY] [ 1.180000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII [ 1.180000] TCP: cubic registered [ 1.180000] NET: Registered protocol family 17 [ 1.190000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.200000] 8021q: 802.1Q VLAN Support v1.8 [ 1.210000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 1.220000] Freeing unused kernel memory: 268K (8036d000 - 803b0000) [ 2.530000] init: Console is alive [ 2.530000] init: - watchdog - [ 5.030000] usbcore: registered new interface driver usbfs [ 5.030000] usbcore: registered new interface driver hub [ 5.040000] usbcore: registered new device driver usb [ 5.100000] SCSI subsystem initialized [ 5.110000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.110000] ehci-platform: EHCI generic platform driver [ 5.120000] ehci-platform ehci-platform: EHCI Host Controller [ 5.120000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 [ 5.130000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000 [ 5.160000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 [ 5.160000] hub 1-0:1.0: USB hub found [ 5.160000] hub 1-0:1.0: 1 port detected [ 5.170000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.180000] ohci-platform: OHCI generic platform driver [ 5.180000] uhci_hcd: USB Universal Host Controller Interface driver [ 5.200000] usbcore: registered new interface driver usb-storage [ 5.490000] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 5.630000] init: - preinit - [ 5.640000] hub 1-1:1.0: USB hub found [ 5.640000] hub 1-1:1.0: 4 ports detected [ 6.300000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform [ 6.450000] random: procd urandom read with 11 bits of entropy available [ 6.670000] usb 1-1.2: new high-speed USB device number 4 using ehci-platform [ 6.690000] mount_root: loading kmods from internal overlay [ 6.890000] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 6.910000] scsi host0: usb-storage 1-1.2:1.0 [ 7.010000] jffs2: notice: (328) jffs2_build_xattr_subsystem: complete building xattr subsystem, 6 of xdatum (0 unchecked, 6 orphan) and 6 of xref (0 dead, 6 orphan) found. [ 7.030000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab [ 7.040000] block: extroot: not configured [ 7.100000] jffs2: notice: (325) jffs2_build_xattr_subsystem: complete building xattr subsystem, 6 of xdatum (0 unchecked, 6 orphan) and 6 of xref (0 dead, 6 orphan) found. [ 7.230000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab [ 7.240000] block: extroot: not configured [ 7.250000] mount_root: switching to jffs2 overlay [ 7.330000] procd: - early - [ 7.330000] procd: - watchdog - [ 7.990000] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 0933 PQ: 0 ANSI: 6 [ 8.010000] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 8.520000] procd: - ubus - [ 9.540000] procd: - init - [ 11.460000] RPC: Registered named UNIX socket transport module. [ 11.470000] RPC: Registered udp transport module. [ 11.470000] RPC: Registered tcp transport module. [ 11.480000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 11.500000] tun: Universal TUN/TAP device driver, 1.6 [ 11.510000] tun: © 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 11.540000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 11.550000] usbcore: registered new interface driver cdc_acm [ 11.560000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 11.570000] usbcore: registered new interface driver cdc_wdm [ 11.570000] Loading modules backported from Linux version master-2015-03-09-0-g141f155 [ 11.580000] Backport generated by backports.git backports-20150129-0-gdd4a670 [ 11.600000] nf_conntrack version 0.5.0 (956 buckets, 3824 max) [ 11.630000] usbcore: registered new interface driver ums-alauda [ 11.640000] usbcore: registered new interface driver ums-cypress [ 11.650000] usbcore: registered new interface driver ums-datafab [ 11.660000] usbcore: registered new interface driver ums-freecom [ 11.660000] usbcore: registered new interface driver ums-isd200 [ 11.670000] usbcore: registered new interface driver ums-jumpshot [ 11.680000] usbcore: registered new interface driver ums-karma [ 11.690000] usbcore: registered new interface driver ums-sddr09 [ 11.690000] usbcore: registered new interface driver ums-sddr55 [ 11.700000] usbcore: registered new interface driver ums-usbat [ 11.720000] usbcore: registered new interface driver usbserial [ 11.720000] usbcore: registered new interface driver usbserial_generic [ 11.730000] usbserial: USB Serial support registered for generic [ 11.780000] xt_time: kernel timezone is -0000 [ 11.790000] usbcore: registered new interface driver asix [ 11.800000] usbcore: registered new interface driver cdc_ether [ 11.840000] cfg80211: Calling CRDA to update world regulatory domain [ 11.840000] cfg80211: World regulatory domain updated: [ 11.850000] cfg80211: DFS Master region: unset [ 11.850000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 11.860000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 11.870000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 11.880000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 11.890000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 11.900000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 11.900000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 11.910000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 11.920000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 11.940000] ip_tables: © 2000-2006 Netfilter Core Team [ 12.040000] usbcore: registered new interface driver pl2303 [ 12.050000] usbserial: USB Serial support registered for pl2303 [ 12.060000] PPP generic driver version 2.4.2 [ 12.060000] NET: Registered protocol family 24 [ 12.070000] usbcore: registered new interface driver qmi_wwan [ 12.090000] usbcore: registered new interface driver rndis_host [ 12.110000] usbcore: registered new interface driver sierra_net [ 12.160000] usbcore: registered new interface driver option [ 12.170000] usbserial: USB Serial support registered for GSM modem (1-port) [ 12.200000] usbcore: registered new interface driver rt2800usb [ 12.220000] usb 1-1.1: ath9k_htc: Firmware htc_9271.fw requested [ 12.230000] usbcore: registered new interface driver ath9k_htc [ 12.330000] ath: EEPROM regdomain: 0x0 [ 12.330000] ath: EEPROM indicates default country code should be used [ 12.330000] ath: doing EEPROM country->regdmn map search [ 12.330000] ath: country maps to regdmn code: 0x3a [ 12.330000] ath: Country alpha2 being used: US [ 12.330000] ath: Regpair used: 0x3a [ 12.350000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 12.350000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2 [ 12.510000] cfg80211: Calling CRDA for country: US [ 12.510000] cfg80211: Regulatory domain changed to country: US [ 12.520000] cfg80211: DFS Master region: FCC [ 12.520000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 12.530000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) [ 12.540000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A) [ 12.550000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s) [ 12.560000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) [ 12.570000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 12.840000] usb 1-1.1: ath9k_htc: Transferred FW: htc_9271.fw, size: 50980 [ 13.080000] ath9k_htc 1-1.1:1.0: ath9k_htc: HTC initialized with 33 credits [ 15.850000] ath9k_htc 1-1.1:1.0: ath9k_htc: FW Version: 1.3 [ 15.860000] ath9k_htc 1-1.1:1.0: FW RMW support: Off [ 15.860000] ath: EEPROM regdomain: 0x0 [ 15.860000] ath: EEPROM indicates default country code should be used [ 15.860000] ath: doing EEPROM country->regdmn map search [ 15.860000] ath: country maps to regdmn code: 0x3a [ 15.860000] ath: Country alpha2 being used: US [ 15.860000] ath: Regpair used: 0x3a [ 15.870000] ieee80211 phy1: Atheros AR9271 Rev:1 [ 17.780000] usb 1-1.3: new high-speed USB device number 5 using ehci-platform [ 22.860000] device eth0 entered promiscuous mode [ 28.870000] device wlan0 entered promiscuous mode [ 28.880000] br-lan: port 2(wlan0) entered forwarding state [ 28.880000] br-lan: port 2(wlan0) entered forwarding state [ 29.060000] device wlan0-1 entered promiscuous mode [ 29.090000] br-lan: port 3(wlan0-1) entered forwarding state [ 29.090000] br-lan: port 3(wlan0-1) entered forwarding state [ 30.090000] br-lan: port 3(wlan0-1) entered disabled state [ 30.880000] br-lan: port 2(wlan0) entered forwarding state [ 31.880000] br-lan: port 3(wlan0-1) entered forwarding state [ 31.880000] br-lan: port 3(wlan0-1) entered forwarding state [ 33.880000] br-lan: port 3(wlan0-1) entered forwarding state [ 34.050000] wlan1: authenticate with 00:1c:b3:ae:dd:49 [ 34.240000] random: nonblocking pool is initialized [ 34.900000] wlan1: send auth to 00:1c:b3:ae:dd:49 (try 1/3) [ 34.910000] wlan1: authenticated [ 34.920000] wlan1: associate with 00:1c:b3:ae:dd:49 (try 1/3) [ 34.930000] wlan1: RX AssocResp from 00:1c:b3:ae:dd:49 (capab=0x1431 status=0 aid=5) [ 34.940000] wlan1: associated [ 34.960000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 38.160000] usb 1-1.3: USB disconnect, device number 5 [ 38.920000] usb 1-1.3: new high-speed USB device number 6 using ehci-platform [ 39.050000] rndis_host 1-1.3:1.0: RNDIS init failed, -32 [ 39.060000] rndis_host: probe of 1-1.3:1.0 failed with error -32 [ 543.900000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 604.420000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 1087.250000] usb 1-1.3: USB disconnect, device number 6 [ 1144.330000] usb 1-1.3: new high-speed USB device number 7 using ehci-platform [ 1159.450000] usb 1-1.3: USB disconnect, device number 7 [ 1159.690000] usb 1-1.3: new high-speed USB device number 8 using ehci-platform [ 1159.820000] rndis_host 1-1.3:1.0: RNDIS init failed, -32 [ 1159.820000] rndis_host: probe of 1-1.3:1.0 failed with error -32 [ 1713.420000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 1774.450000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 2060.460000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 2121.490000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 2196.960000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 2257.480000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 3965.120000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 4025.540000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 5182.360000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 5244.520000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 5584.180000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 5644.500000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 5856.360000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 5916.570000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 5993.580000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 6003.610000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 6053.590000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 6084.000000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 6144.520000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 6175.440000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 6235.550000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 6584.630000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 6645.560000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 6814.210000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 6843.600000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 6889.580000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 7114.850000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 7175.580000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 7377.810000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 7440.580000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 8176.400000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 8236.510000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 8325.700000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 8386.520000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 8500.490000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 8561.520000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 8722.600000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 8783.530000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 9807.150000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 9867.570000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 9886.310000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [ 9946.630000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [10807.130000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [10867.640000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [11800.820000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 [11861.650000] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by 00:1c:b3:ae:dd:49 root@Pineapple:~#
  4. No luck on usb0... root@Pineapple:~# ifconfig br-lan Link encap:Ethernet HWaddr xxxxxxxxx inet addr:172.16.42.1 Bcast:172.16.42.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3336 errors:0 dropped:121 overruns:0 frame:0 TX packets:2975 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:639197 (624.2 KiB) TX bytes:1087931 (1.0 MiB) eth0 Link encap:Ethernet HWaddr xxxxxxxxx UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:4 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:262 errors:0 dropped:0 overruns:0 frame:0 TX packets:262 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:23481 (22.9 KiB) TX bytes:23481 (22.9 KiB) wlan0 Link encap:Ethernet HWaddr xxxxxxxxxxx UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:597 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:97278 (94.9 KiB) wlan0-1 Link encap:Ethernet HWaddr xxxxxxxxxxx UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3341 errors:0 dropped:0 overruns:0 frame:0 TX packets:3173 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:686287 (670.2 KiB) TX bytes:1197408 (1.1 MiB) wlan1 Link encap:Ethernet HWaddr xxxxxxxxxxxxx inet addr:192.168.211.250 Bcast:192.168.211.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4229 errors:0 dropped:980 overruns:0 frame:0 TX packets:2909 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1349722 (1.2 MiB) TX bytes:600761 (586.6 KiB)
  5. So I got my nano all set up, then realized I couldn't get ICS to work on my mac...So I bought a android tablet to attempt USB tethering with the wifi pineapple connector app. I reset my pineapple, set my tablet to tether, connected the USB cable and the app hangs on "Waiting for connection". I'm assuming the problem is I already downloaded the latest firmware before I attempted this process, but I'm open to suggestions. At this point I can reconfigure over wifi but I'm still stuck with the USB tethering. After configuration I check to see if I can connect with eth0 and the option isn't in the dropdown, only wlan1. I'd like to be able to both use the Android app, and share the wifi connection from the tablet to the pineapple.
  6. I've been trying to get this ICS thing going on my mac for a few days now with no success... is there any solution aside from adding a secondary usb adapter? I've attempted launching through a kali vm, but the doesnt play nice between my native wifi and the pineapple. Will there be support for this on a mac in the future?
  7. I probably should have mentioned Im on El Capitan 10.11.1 When I try to save the script as an application it gives me a syntax error "Expected end of line, etc. but found identifier." it highlights the validateIP on the first line of code: function vaidateIP() When I try to run it from terminal it gives me the error: -bash: syntax error near unexpected token '('
  8. Got my nano last night, super pumped! When I got to Networking I only see the option to select wlan1 as my interface, but it looks like this interferes with PineAP. Is there a way I can select eth0 as the interface and have it use my wifi on my mac to connect to the internet? Or is there an option to free up the second radio that I'm missing so I can use PineAP and be connected to the internet at the same time? I tried selecting Disable Management AP under the Access Points menu and I'm still only given the option to choose wlan1 as my interface in client mode. On a side note, when I plug in an additional alfa usb adapter to the nano, it recognizes wlan2 automagically. Are there any other options for client mode?
×
×
  • Create New...