MadDog86
-
Posts
27 -
Joined
-
Last visited
Posts posted by MadDog86
-
-
Does any body else have a problem with recon mode not showing connected clients i know the clients are connected because it is my clients that are connected
takes about 5 refreshes for it to show one client then after i refresh shows no clients again is this a bug or is there something wrong with the pineapple antennas -
I tried using the infusion but nothing happened.
Where did you get the infusion from ?
-
Sounds good mate keep up the work will stay tuned to this.
-
Do not know if it is a error or i am just not using it correctly but i have 3 clients connected to the PineAp suite all with internet connection and nothing shows
* Description of issue Just shows Mac address of built in WiFi card and states not connected
* Configuration of Infusion Info getter installed Hidden Iframe installed Database on SD installed
* Version of Get Infusion 1.4* Version of MKV firmware 2.3.0 -
hi i have a question regarding urlsnarf on the small tile its default device to use is lo when i open the big tile its default device is br-lan
is this just the way the infusion works or do i need to set both small tile and big tile to br-lan or just leave as default small tile lo big tile br-lan
Thanks in advance -
i understand a little about what the infusion does but cannot seem to get it to work i open the big tile and all i see is a mac address of a alfa card and states not connected ? any help on this thanks in advance
-
Can feel the difference in the overall UI smooth and clean even with PineAp All running the UI does not feel sluggish and i do not get any random lockups great release Thanks to all involved
-
Sure, you can spoof wpa ssids all day long. The clients won't connect though. Most client software is smart enough to not connect if the configuration is different from what they know. I run into this all the time at work even when I know the password. Setting up a replacement access point when the old one goes tits up, and set the encryption to tkip when the old one was aes. The clients won't connect because the encryption scheme is different from what they have saved.
So once again, you can't spoof an encrypted ssid with an unencrypted one.
+1 To this, @notchener you can however get the victim to connect to a fake AP that has been created by the pineAP and that is only if the device you are trying to get onto your fake AP has a stored NONE unencrypted profile on there device so you basically ddos the client from the encrypted AP then the device the client is connected to will move onto the next probe thats in there list and if it is a none secured AP in the list it should connect to the fake AP created by the pineAP does this make sense
Think of it this way two profiles on your mobile phone (1) HOME WIFI SECURED (2) FREE WIFI IN TOWN when you are at home and your mobile is connected to your home WiFi with a password as soon as you go out of range of the AP you are unable to connect if you go into your local shopping center and you have connected to profile (2) before your mobile will auto connect to that AP this is how you would achieve getting the secured client onto the unsecured AP you just keep death until it gives up and connects to the next one in the list as far as the client device is concerned when you are stopping it access from the secured AP it just thinks it is out of range then moves on.
to test this yourself create a WiFi profile on your phone with no encryption connect to it then connect back to your home WiFi start PineAp suite then turn of your home router and watch your phone disconnect from your home network and connect to the unencrypted WiFi profile you have just created
-
The firework led status you speak of is normal when the pineapple is loaded that is how the leds are suppose to flash try this guide from hear https://scotthelme.co.uk/wifi-pineapple-mark-v-introduction-setup/ it is a great write up on how to fully set your pineapple up helped me out when i first started any problems just reply back hear and i or any of the more experienced members will give you any help good luck
-
Solved What I had to do if any body else is having trouble you need to connect to your own AP created by the pineapple so you are then on the same network as the victims then in nmap/zenmap armitage what ever you use scan the network range 172.16.42.42/24 and bingo the victims show up in the scan list handy for displaying what if any ports are open etc
-
No suggestions on this guys ? even when i run a scan with zenmap it finds all hosts on my network plus the IP of the pineapple but not the the IP given to the victims from the pineapple even if i manually put the IP from the dhcp client tile it says the host is not up when in fact it is as i am able to browse internet etc how is one supposed to do any recon of the connected clients ?
-
Hi how would i scan for targets i run Armitage on my laptop scan my whole network with built in nmap function it finds all hosts on my network so that is fine
hear is the problem i have two test laptops connected to the pineapple AP i have internet etc so all is fine the problem Armitage/nmap only finds the the mark 5 ip but not the ips of the test laptops connected to the mark 5 where am i going wrong any help would be appreciated
-
not really what i was hoping for oh well win some lose some i guess
-
How have you got the pineapple set up ? have you managed to set it up first time changed password etc then it reboots now you cannot get on or have you not even got that far ?
-
Cheers for the reply's Guys 32gb sounds good to me thanks alot
-
What is the maximum sd card size the mark 5 can take just want to know before i buy one was hoping usb would work but after looking this was only available on the mark 4.
-
Hi i seem to have a problem with certain infusions mainly sslsplit sslstrip and urlsnarf whenever i start one from the tile it says running if i open the tile it states it is not running with a red x or even if i click the refresh button from the tile it changes from running to not running is there a fix or is this a known error
Just to add when i click say sslstrip and i refresh and it says its not running it kills my internet connection what could be the problem ?
-
Cheers for the reply i did not know about recon mode this has fixed this for me scan for AP+Clients spam deauth client until the victims device connects to a open fake probe that there device has stored that has in turn been created by pineAP
-
How are you creating the evil twin manually by terminal or by script ? i always say it is best to learn from terminal before going straight into scripts as then if you run a script you can figure out what is going wrong
but if you are in a rush to use a evil twin have a look at easycreds.sh for creating one and you can specify what ip, gateway etc to use with this script but if you are doing it manually try changing your Isc-dhcp config to this see if this works out for you
dens-update-style ad-hoc;
default-lease-time 600;
max-lease-time 7200;
authoritative;
subnet 10.0.0.0 netmask 255.255.255.0 {
option subnet-mask 255.255.255.0;
option broadcast-address 10.0.0.255;
option routers 10.0.0.254;
option domain-name-servers 8.8.8.8;
range 10.0.0.1 10.0.0.140;
} -
Cheers Guys sorted it all out now unlocked for me after 4th post
-
Nobody got an idea of how i might accomplish this been looking everywhere cannot find a answer does that mean it is impossible and the only way to use wireshark with the mark v is to have it hardwired to a pc/laptop and have ICS
Bit of a disappointment if this is the case as if it does not work with wireshark that probably means any other software on the pc wont work in conjunction with the pineapple unless it is hardwired to the pc/laptop ?
-
You may not be able to do that until you have a specific number of posts under your belt. I'm not sure how many it is but once you are able to change it you will need to go to your profile and click the button that says Edit my Profile. From there you will find the Signature section in the menu on the left.
ahh Ok thank you very much
-
Hi How do i change my avatar it keeps giving me the error
member_profile_disabled i tried looking for any forum rules to see if it stated you need so many post etc but could not find any
also how do i add a signature like below
Thanks in advance
The More you learn the More You are able to Teach
-
Hi how do i use wireshark i no the simplest way would to be just choose my local LAN and scan that way but i do not have my mark 5 setup like that
i have it hardwired to my router any help would be great
Thanks in AdvanceThe More you learn the More You are able to Teach
[Support] Delorean
in Mark V Infusions
Posted
Answer my own question seen as nobody else did case anybody who else is new to the pineapple the infusion can be found on the command line infusion tab on the pineapple bar also same problem as above infusion just does nothing after (pineapple infusion delorean command) nothing happens ?