Jump to content

MarcSThe1st

Active Members
  • Posts

    59
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by MarcSThe1st

  1. 5 minutes ago, Zylla said:

    Interesting. I also upgraded to the newest version, then i got the same error message as you guys.
    I then tried downgrading to the exact same version i used before that, and surprise: same error.. WTF.
    I'm getting  a beer. This needs to be squashed asap. Strange af.

    jupp, sounds to me like "have you tried to restart the device already?!" ? 

  2. sure 

     

    
    root@Pineapple:/tmp# opkg info curl
    Package: curl
    Version: 7.40.0-3.1
    Depends: libc, libcurl
    Status: install user installed
    Section: net
    Architecture: ar71xx
    Maintainer: Imre Kaloz <kaloz@openwrt.org>
    MD5Sum: 11a338aaec6c1b1441ecb0bfe1c0f7c4
    Size: 38370
    Filename: curl_7.40.0-3.1_ar71xx.ipk
    Source: package/network/utils/curl
    Description: A client-side URL transfer utility
    Installed-Time: 1459545776
    
    root@Pineapple:/tmp# opkg info zlib
    Package: zlib
    Version: 1.2.8-1
    Depends: libc
    Status: install user installed
    Section: libs
    Architecture: ar71xx
    MD5Sum: ad46d1cab1a4c07e5e55dcb28b79ce61
    Size: 37865
    Filename: zlib_1.2.8-1_ar71xx.ipk
    Source: package/libs/zlib
    Description: Library implementing the deflate compression method
    Installed-Time: 1534488441
    
    root@Pineapple:/tmp# opkg info libpthread
    Package: libpthread
    Version: 0.9.33.2-1
    Depends: libgcc
    Status: install hold installed
    Section: libs
    Essential: yes
    Architecture: ar71xx
    Maintainer: Felix Fietkau <nbd@openwrt.org>
    MD5Sum: bfaca8ace2404962d41bef6762f3923b
    Size: 31257
    Filename: libpthread_0.9.33.2-1_ar71xx.ipk
    Source: package/libs/toolchain
    Description: POSIX thread library
    Installed-Time: 1534488441
    
    root@Pineapple:/tmp# opkg info libpcap
    Package: libpcap
    Version: 1.5.3-1
    Depends: libc
    Status: unknown ok not-installed
    Section: libs
    Architecture: ar71xx
    Maintainer: Felix Fietkau <nbd@openwrt.org>
    MD5Sum: d3e3622bd50b7ab8d1c27b1f15a61dd5
    Size: 83095
    Filename: libpcap_1.5.3-1_ar71xx.ipk
    Source: package/libs/libpcap
    Description: This package contains a system-independent library for user-level network packet
     capture.
    
    Package: libpcap
    Version: 1.9.0-1
    Depends: libc
    Status: install user installed
    Architecture: ar71xx
    Installed-Time: 1534488441
    
    root@Pineapple:/tmp# opkg info libopenssl
    Package: libopenssl
    Version: 1.0.2g-1
    Depends: libc, zlib
    Status: unknown ok not-installed
    Section: libs
    Architecture: ar71xx
    MD5Sum: d0fc4828f7029e1668dbd66cbb19a7f8
    Size: 685049
    Filename: libopenssl_1.0.2g-1_ar71xx.ipk
    Source: package/libs/openssl
    Description: The OpenSSL Project is a collaborative effort to develop a robust,
     commercial-grade, full-featured, and Open Source toolkit implementing the Secure
     Sockets Layer (SSL v2/v3) and Transport Layer Security (TLS v1) protocols as well
     as a full-strength general purpose cryptography library.
     This package contains the OpenSSL shared libraries, needed by other programs.
    
    Package: libopenssl
    Version: 1.0.2m-1
    Depends: libc, zlib
    Status: install user installed
    Architecture: ar71xx
    Installed-Time: 1534488441

     

  3.  

    root@Pineapple:/sd/modules# opkg install hcxtools_4.2.1-2_ar71xx.ipk 
    Upgrading hcxtools on root from 4.2.1-1 to 4.2.1-2...
    Configuring hcxtools.
    root@Pineapple:/sd/modules# opkg install hcxdumptool_4.2.1-1_ar71xx.ipk 
    Installing hcxdumptool (4.2.1-1) to root...
    Configuring hcxdumptool.
    root@Pineapple:/sd/modules# cd /tmp
    
    root@Pineapple:/tmp# hcxdumptool -o /tmp/test.pcapng -i wlan1mon --enable_status 1
    
    start capturing (stop with ctrl+c)
    INTERFACE:...............: wlan1mon
    FILTERLIST...............: 0 entries
    MAC CLIENT...............: fcc233880bc5 (client)
    MAC ACCESS POINT.........: 68e16698d73b (start NIC)
    EAPOL TIMEOUT............: 150000
    REPLAYCOUNT..............: 65260
    ANONCE...................: 82b1b6b70a33be6322e12eb4deae2309c13de84403e7852057d041ef3e9845c0
    
    [19:07:41 - 005] 9cb2b21121ad -> fcc233880bc5 [FOUND PMKID CLIENT-LESS]
    INFO: cha=7, rx=2057, rx(dropped)=323, tx=148, powned=1, err=0^C
    terminated...
    root@Pineapple:/tmp# hcxpcaptool -z test.16800 test.pcapng 
    start reading from test.pcapng
    Bus error
    root@Pineapple:/tmp# 

    nope, also nothing happened in the dmesg 

    [   42.200000] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
    [  123.660000] wlan1: deauthenticating from 9c:b2:b2:11:21:ad by local choice (Reason: 3=DEAUTH_LEAVING)

     

  4. 15 minutes ago, Zylla said:

    You're using a Nano right? And the test.pcapng file is located on your SD-card?
    If you answered YES to those two questions, then please copy/paste the output from dmesg after getting the error.
    I'm pretty certain you're experiencing the dreaded "sd-card bug". Where the Nano are having problems with reading/writing to the SD-card

    YES - for both.

    I will reboot the nano to give you a fresh dmesg ?  (incl. the pmkid attack!)

    [    0.000000] Linux version 3.18.84 (@48ce6521e5bc) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 unknown) ) #212 Fri Aug 17 06:47:38 UTC 2018
    [    0.000000] MyLoader: sysp=8a14b024, boardp=44b65156, parts=b69f8d32
    [    0.000000] bootconsole [early0] enabled
    [    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
    [    0.000000] SoC: Atheros AR9330 rev 1
    [    0.000000] Determined physical RAM map:
    [    0.000000]  memory: 04000000 @ 00000000 (usable)
    [    0.000000] Initrd not found or empty - disabling initrd
    [    0.000000] Zone ranges:
    [    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
    [    0.000000] Movable zone start for each node
    [    0.000000] Early memory node ranges
    [    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
    [    0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
    [    0.000000] On node 0 totalpages: 16384
    [    0.000000] free_area_init_node: node 0, pgdat 80365cf0, node_mem_map 81000000
    [    0.000000]   Normal zone: 128 pages used for memmap
    [    0.000000]   Normal zone: 0 pages reserved
    [    0.000000]   Normal zone: 16384 pages, LIFO batch:3
    [    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
    [    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
    [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
    [    0.000000] pcpu-alloc: [0] 0
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
    [    0.000000] Kernel command line:  board=PINEAPPLE-NANO  console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
    [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
    [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
    [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Writing ErrCtl register=00000000
    [    0.000000] Readback ErrCtl register=00000000
    [    0.000000] Memory: 60880K/65536K available (2524K kernel code, 143K rwdata, 540K rodata, 240K init, 188K bss, 4656K reserved, 0K cma-reserved)
    [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    [    0.000000] NR_IRQS:51
    [    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
    [    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
    [    0.080000] pid_max: default: 32768 minimum: 301
    [    0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.100000] NET: Registered protocol family 16
    [    0.100000] MIPS: machine is WiFi Pineapple NANO
    [    0.380000] Switched to clocksource MIPS
    [    0.380000] NET: Registered protocol family 2
    [    0.390000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.390000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.400000] TCP: Hash tables configured (established 1024 bind 1024)
    [    0.400000] TCP: reno registered
    [    0.410000] UDP hash table entries: 256 (order: 0, 4096 bytes)
    [    0.410000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
    [    0.420000] NET: Registered protocol family 1
    [    0.420000] PCI: CLS 0 bytes, default 32
    [    0.420000] futex hash table entries: 256 (order: -1, 3072 bytes)
    [    0.440000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [    0.440000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
    [    0.450000] msgmni has been set to 118
    [    0.460000] io scheduler noop registered
    [    0.460000] io scheduler deadline registered (default)
    [    0.470000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
    [    0.470000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART
    [    0.480000] console [ttyATH0] enabled
    [    0.490000] bootconsole [early0] disabled
    [    0.500000] m25p80 spi0.0: found mx25l12805d, expected m25p80
    [    0.500000] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
    [    0.520000] 5 tp-link partitions found on MTD device spi0.0
    [    0.520000] Creating 5 MTD partitions on "spi0.0":
    [    0.520000] 0x000000000000-0x000000020000 : "u-boot"
    [    0.530000] 0x000000020000-0x00000013ae74 : "kernel"
    [    0.540000] 0x00000013ae74-0x000000ff0000 : "rootfs"
    [    0.540000] mtd: device 2 (rootfs) set to be root filesystem
    [    0.540000] 1 squashfs-split partitions found on MTD device rootfs
    [    0.550000] 0x000000d80000-0x000000ff0000 : "rootfs_data"
    [    0.560000] 0x000000ff0000-0x000001000000 : "art"
    [    0.560000] 0x000000020000-0x000000ff0000 : "firmware"
    [    0.590000] libphy: ag71xx_mdio: probed
    [    1.190000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
    [    1.200000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
    [    1.200000] TCP: cubic registered
    [    1.200000] NET: Registered protocol family 17
    [    1.210000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
    [    1.220000] 8021q: 802.1Q VLAN Support v1.8
    [    1.230000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
    [    1.240000] Freeing unused kernel memory: 240K
    [    2.780000] init: Console is alive
    [    2.780000] init: - watchdog -
    [    5.440000] usbcore: registered new interface driver usbfs
    [    5.440000] usbcore: registered new interface driver hub
    [    5.450000] usbcore: registered new device driver usb
    [    5.500000] SCSI subsystem initialized
    [    5.510000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    5.520000] ehci-platform: EHCI generic platform driver
    [    5.520000] ehci-platform ehci-platform: EHCI Host Controller
    [    5.530000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
    [    5.540000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
    [    5.560000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
    [    5.560000] hub 1-0:1.0: USB hub found
    [    5.560000] hub 1-0:1.0: 1 port detected
    [    5.570000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    5.580000] ohci-platform: OHCI generic platform driver
    [    5.580000] uhci_hcd: USB Universal Host Controller Interface driver
    [    5.600000] usbcore: registered new interface driver usb-storage
    [    5.850000] init: - preinit -
    [    5.890000] usb 1-1: new high-speed USB device number 2 using ehci-platform
    [    6.400000] hub 1-1:1.0: USB hub found
    [    6.420000] hub 1-1:1.0: 4 ports detected
    [    6.580000] random: procd urandom read with 11 bits of entropy available
    [    6.840000] mount_root: loading kmods from internal overlay
    [    6.880000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
    [    7.150000] jffs2: notice: (327) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 1 of xref (0 dead, 0 orphan) found.
    [    7.170000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
    [    7.180000] block: extroot: not configured
    [    7.220000] jffs2: notice: (323) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 1 of xref (0 dead, 0 orphan) found.
    [    7.250000] usb 1-1.2: new high-speed USB device number 4 using ehci-platform
    [    7.350000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
    [    7.360000] block: extroot: not configured
    [    7.360000] mount_root: switching to jffs2 overlay
    [    7.390000] usb-storage 1-1.2:1.0: USB Mass Storage device detected
    [    7.410000] scsi host0: usb-storage 1-1.2:1.0
    [    7.440000] procd: - early -
    [    7.440000] procd: - watchdog -
    [    8.350000] procd: - ubus -
    [    8.580000] scsi 0:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0933 PQ: 0 ANSI: 6
    [    8.810000] sd 0:0:0:0: [sda] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
    [    8.810000] sd 0:0:0:0: [sda] Write Protect is off
    [    8.820000] sd 0:0:0:0: [sda] Mode Sense: 21 00 00 00
    [    8.830000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [    8.860000]  sda: sda1 sda2
    [    8.880000] sd 0:0:0:0: [sda] Attached SCSI removable disk
    [    9.370000] procd: - init -
    [   11.360000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
    [   11.660000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
    [   11.670000] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
    [   11.720000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [   12.910000] Adding 1004024k swap on /dev/sdcard/sd2.  Priority:-1 extents:1 across:1004024k
    [   14.120000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
    [   14.130000] Backport generated by backports.git backports-20151218-0-g2f58d9d
    [   14.290000] ath: EEPROM regdomain: 0x0
    [   14.290000] ath: EEPROM indicates default country code should be used
    [   14.290000] ath: doing EEPROM country->regdmn map search
    [   14.290000] ath: country maps to regdmn code: 0x3a
    [   14.290000] ath: Country alpha2 being used: US
    [   14.290000] ath: Regpair used: 0x3a
    [   14.300000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [   14.300000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
    [   14.320000] usb 1-1.1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
    [   14.330000] usbcore: registered new interface driver ath9k_htc
    [   14.470000] RPC: Registered named UNIX socket transport module.
    [   14.470000] RPC: Registered udp transport module.
    [   14.480000] RPC: Registered tcp transport module.
    [   14.480000] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [   14.510000] tun: Universal TUN/TAP device driver, 1.6
    [   14.520000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [   14.550000] usbcore: registered new interface driver rt2800usb
    [   14.590000] usbcore: registered new interface driver rtl8187
    [   14.640000] usbcore: registered new interface driver rtl8192cu
    [   14.680000] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [   14.700000] usbcore: registered new interface driver cdc_acm
    [   14.700000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
    [   14.720000] usbcore: registered new interface driver cdc_wdm
    [   14.750000] nf_conntrack version 0.5.0 (955 buckets, 3820 max)
    [   14.810000] usbcore: registered new interface driver ums-alauda
    [   14.820000] usbcore: registered new interface driver ums-cypress
    [   14.820000] usbcore: registered new interface driver ums-datafab
    [   14.830000] usbcore: registered new interface driver ums-freecom
    [   14.840000] usbcore: registered new interface driver ums-isd200
    [   14.850000] usbcore: registered new interface driver ums-jumpshot
    [   14.860000] usbcore: registered new interface driver ums-karma
    [   14.860000] usbcore: registered new interface driver ums-sddr09
    [   14.870000] usbcore: registered new interface driver ums-sddr55
    [   14.890000] usbcore: registered new interface driver ums-usbat
    [   14.910000] usbcore: registered new interface driver usbserial
    [   14.920000] usbcore: registered new interface driver usbserial_generic
    [   14.920000] usbserial: USB Serial support registered for generic
    [   15.000000] xt_time: kernel timezone is -0000
    [   15.000000] usbcore: registered new interface driver asix
    [   15.010000] usbcore: registered new interface driver ax88179_178a
    [   15.020000] usbcore: registered new interface driver cdc_ether
    [   15.030000] ip_tables: (C) 2000-2006 Netfilter Core Team
    [   15.060000] usbcore: registered new interface driver pl2303
    [   15.060000] usbserial: USB Serial support registered for pl2303
    [   15.070000] PPP generic driver version 2.4.2
    [   15.080000] NET: Registered protocol family 24
    [   15.080000] usbcore: registered new interface driver qmi_wwan
    [   15.090000] usb 1-1.1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
    [   15.100000] usbcore: registered new interface driver rndis_host
    [   15.110000] usbcore: registered new interface driver sierra_net
    [   15.140000] usbcore: registered new interface driver option
    [   15.140000] usbserial: USB Serial support registered for GSM modem (1-port)
    [   15.330000] ath9k_htc 1-1.1:1.0: ath9k_htc: HTC initialized with 33 credits
    [   15.580000] ath9k_htc 1-1.1:1.0: ath9k_htc: FW Version: 1.4
    [   15.590000] ath9k_htc 1-1.1:1.0: FW RMW support: On
    [   15.590000] ath: EEPROM regdomain: 0x0
    [   15.590000] ath: EEPROM indicates default country code should be used
    [   15.590000] ath: doing EEPROM country->regdmn map search
    [   15.590000] ath: country maps to regdmn code: 0x3a
    [   15.590000] ath: Country alpha2 being used: US
    [   15.590000] ath: Regpair used: 0x3a
    [   15.600000] ieee80211 phy1: Atheros AR9271 Rev:1
    [   20.170000] random: nonblocking pool is initialized
    [   25.820000] device eth0 entered promiscuous mode
    [   29.080000] eth0: link up (100Mbps/Full duplex)
    [   29.200000] br-lan: port 1(eth0) entered forwarding state
    [   29.200000] br-lan: port 1(eth0) entered forwarding state
    [   31.200000] br-lan: port 1(eth0) entered forwarding state
    [   31.920000] device wlan0 entered promiscuous mode
    [   32.150000] device wlan0-1 entered promiscuous mode
    [   32.150000] br-lan: port 3(wlan0-1) entered forwarding state
    [   32.160000] br-lan: port 3(wlan0-1) entered forwarding state
    [   32.280000] br-lan: port 2(wlan0) entered forwarding state
    [   32.280000] br-lan: port 2(wlan0) entered forwarding state
    [   32.760000] br-lan: port 3(wlan0-1) entered disabled state
    [   33.290000] eth0: link down
    [   33.860000] br-lan: port 1(eth0) entered disabled state
    [   34.280000] br-lan: port 2(wlan0) entered forwarding state
    [   34.440000] eth0: link up (100Mbps/Full duplex)
    [   34.490000] br-lan: port 1(eth0) entered forwarding state
    [   34.490000] br-lan: port 1(eth0) entered forwarding state
    [   35.740000] usb 1-1.3: new high-speed USB device number 5 using ehci-platform
    [   35.790000] br-lan: port 3(wlan0-1) entered forwarding state
    [   35.800000] br-lan: port 3(wlan0-1) entered forwarding state
    [   36.020000] usb 1-1.3: reset high-speed USB device number 5 using ehci-platform
    [   36.160000] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
    [   36.490000] br-lan: port 1(eth0) entered forwarding state
    [   36.860000] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 5370 detected
    [   36.870000] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
    [   37.800000] br-lan: port 3(wlan0-1) entered forwarding state
    [   38.010000] wlan1: authenticate with 9c:b2:b2:11:21:ad
    [   38.190000] wlan1: send auth to 9c:b2:b2:11:21:ad (try 1/3)
    [   38.200000] wlan1: authenticated
    [   38.610000] wlan1: associate with 9c:b2:b2:11:21:ad (try 1/3)
    [   38.620000] wlan1: RX AssocResp from 9c:b2:b2:11:21:ad (capab=0x411 status=0 aid=2)
    [   38.630000] wlan1: associated
    [   42.090000] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
    [   42.200000] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
    [  123.660000] wlan1: deauthenticating from 9c:b2:b2:11:21:ad by local choice (Reason: 3=DEAUTH_LEAVING)

     

    btw: changed directory to /tmp

     

  5. Just now, Zylla said:

    What exact arguments are your providing to hcxpcaptool? The same as the one in the example?

    hcxpcaptool -z test.16800 test.pcapng 
    start reading from test.pcapng
    Bus error

    yes. already tried to figure out if it is connected to dependencies  but didn't found a solution ?

     

  6. you might need to reset wlan0 back from Monitor-mode to standard. 

     

    I think you can use a module for that (like site survey) or via (unsure about the code)

    iw dev wlan0mon del

     

    or like that: (untested)

     ifconfig wlan0 down
     iw config wlan0 mode managed
     ifconfig wlan0 up
  7. didn't test the new app yet, but the translation of the App description in the German Play Store is a mess:

    G√ľnstig verwalten und Ihre Internetverbindung mit dem WiFi-Ananas teilen.

    it's like "cheap administer and your internet connection sharing with an WiFi-Pineapple". (for non-german-speaking)

    better would be: "Einfaches verwalten und teilen der Internetverbindung mit der WiFi-Pineapple." (WiFi-Pineapple should not be translated as it's a name.)

  8. Thanks for the feedback. Here are answers to your questions.

    Try uninstalling the other modules that you have installed. Is this happening on the nano or tetra?

    Hey newbi3,

    just found out:

    EP is not being shown as my error.php (@ /www/) contains a "<body onload="goBack()">". The goback is called from index.php => redirect.php => error.php.

    Is there any solution to that except renaming error.php?

  9. Hey newbi3,

    unfortunately I can't use EP.

    My problem is that after clicking on "Evil Portal" in the Modules dropdown Evil Portal shows up shortly (<1 second) and then a random other module is shown.

    This behavior only occurs on EP.

    Any Idea what might cause it? Did anybody else get this behavior?

    I start thinking my Nano has some other defect?!? :wacko:

×
×
  • Create New...