Jump to content

MarcSThe1st

Active Members
  • Posts

    59
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by MarcSThe1st

  1. sounds to me like your pineapple isn't online at all. (did you disable the Laptops (?) wifi?)

    Can you load the Bulletins on the Dashboard of the Pineapple? Or can you download modules? If not, you are not online.

    Did you enable ICS (internet Connection Sharing) so the pineapple gets internet via the laptop (if connected via USB)?

    I'm personally like to use (and due to Mac OS) a additional USB-WiFI-Adapter (plug'n'play) to connect the Nano to the internet. (unter NETWORK => WIFI CLIENT MODE you can select the wlan (wlan2 would be the additional wifi-adapter) and SCAN for available networks to connect.

    Once your Nano is online the internet should be shared by default.

  2. Hey guys,

    i was checking the System Log as I saw the following entries:

    auth.err sshd[2499]: error: Could not load host key: /etc/ssh/ssh_host_ecdsa_key
    auth.err sshd[2499]: error: Could not load host key: /etc/ssh/ssh_host_ed25519_key
    

    I recently made a fresh factory reset and update to 1.0.6. SSH into the pineapple is possible, but I wonder why the keys were not generated.

    Anyone else with this error message?

  3. Back at home I connected the WP nano to my Kali Linux netbook using the wp6.sh script. After that I can capture SSIDs in recon mode and in pineAP again. So the problem not capturing SSIDs seems to be after factory reset and first startup and setup using usb tethring on android phone. Tommorow I will check again using usb thethering and wifi tethring on wlan2 (Ralink rt5370).

    For me the problem still exists.

    I'm using a USB-Pilot: The Nano takes just consumes <550mA (plus always above 5.04V) while RECON scanning (so it is not under-Powered). I only see 1 SSID (my own) + 6 "out-of-range"-APs . At the same time my Macbook Air (also the power source) finds 10 SSID (incl. my own).

    Further more I just realized, that using wlan1mon to scan for available Networks (WiFi Client Mode) the device finds MORE APs than my Macbook (or the Recon).

    Recon isn't even finding wlan0-1...

    Even update from 1.0.5 to 1.0.6 (and several Factory rests on 1.0.5 and a now installation of the firmware didn't change. Any solutions/Sugesstions?

  4. Hi everyone,

    I am also new to nano. I have got the same questions. Somebody please answer these queries.

    You might me able the set the encryption flag on the SSID, but you won't be able to get the password from that as you do not have the 4-way-Handshake. Without it you won't be able to get any traffic. - AFAIK

    • Upvote 1
  5. Hey guys,

    what is your opinion on the following Topic:

    Offline Pineapples might not be associated as modern os (mobile & Laptops) check for an available internet connection.

    Usually this is done by checking in an webpage or file is accessible.

    Do you think some kind of internet-connection fake-module would be interessting?

    Cheers M.

  6. Hey folks,

    can anybody tell me why we need a landing page (@ /etc/pineapple/landingpage.php)?

    I mean why isn't it editing the index.php in /www/index.php? All ported modules are working with the index.php.

    So I don't see any benefit to route the trafic to /etc/pineapple/landingpage.php (and then into /www/) instead /www/index.php like it was in the past.

    Thanks.

  7. As you're using an Mac you should check the known_hosts file in the folder

     /Users/YOURUSERNAME/.ssh/ 

    YOURUSERNAME is the account on your Mac.

    I had a similar issue after updating all the ssh-moduls from opkg ;) - Just backup the known_hosts file (like rename it). Connect to the pineapple and you're done..

×
×
  • Create New...