I'm trying to get my 8 gb Sandisk Cruzer setup for use the MK5 but keep hitting a wall for some reason. While it appears to be mounted properly, I have no option to install to USB from the bar, though swap works correctly.
I formatted and partitioned the drive into two ext4 partitions (one 6gb storage, the other 2 gb swap) and reconfigured my fstab accordingly:
config global automount
option from_fstab 1
option anon_mount 1
config global autoswap
option from_fstab 1
option anon_swap 0
config mount
option target /sd
option device /dev/sdcard/sd
option fstype auto
option options rw,sync
option enabled 1
option enabled_fsck 0
config mount
option target /usb
option device /dev/sda1
option fstype ext4
option options rw,sync
option enabled 1
option enabled_fsck 0
config swap
option device /dev/sda2
option enabled 1
Executed mkswap /dev/sda2, rebooted, and now I see:
Current Disk Usage:
Filesystem Size Used Available Use% Mounted on
rootfs 3.6M 728.0K 2.9M 20% /
/dev/root 11.5M 11.5M 0 100% /rom
tmpfs 30.2M 272.0K 29.9M 1% /tmp
tmpfs 512.0K 0 512.0K 0% /dev
/dev/mtdblock3 3.6M 728.0K 2.9M 20% /overlay
overlayfs:/overlay 3.6M 728.0K 2.9M 20% /
/dev/sda1 6.0G 217.7M 5.5G 4% /usb
/dev/sdcard/sd1 926.7M 48.2M 832.0M 5% /sd
Current Memory Usage:
total used free shared buffers
Mem: 61804 42156 19648 0 6212
-/+ buffers: 35944 25860
Swap: 2580328 0 2580328
Good, right? Nah.
For some reason I have no option to install to USB. I ssh'd to the box and created a test folder in the usb folder. checked /mnt/./sda1 and the test folder was there.
Verified that mount has the device mapped to usb and was formatted to ext4...
root@Pineapple:/# mount
rootfs on / type rootfs (rw)
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,noatime)
sysfs on /sys type sysfs (rw,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime,size=30904k)
tmpfs on /dev type tmpfs (rw,noatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,noatime,mode=600)
/dev/mtdblock3 on /overlay type jffs2 (rw,noatime)
overlayfs:/overlay on / type overlayfs (rw,relatime,lowerdir=/,upperdir=/overlay)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
/dev/sda1 on /usb type ext4 (rw,sync,relatime,user_xattr,barrier=1,data=ordered)
/dev/sdcard/sd1 on /sd type ext4 (rw,relatime,user_xattr,barrier=1,data=ordered)
none on /proc/bus/usb type usbfs (rw,relatime)
I'm not sure where I went wrong? I can install to and communicate with the sd card from infusion management without any issue, but I have no option to install to USB.
Did I miss something obvious?
Any input is appreciated
Thanks!