jimb0

Can you create a new list in editor and call it from the menu next the start option? Where are occupineapple and mdk3 installed on your device?

Can you connect to it via the pineapples LAN address on your network? You wont be able to reach the 172 address if you aren't connected to the pineapple (either via ICS or as a client) because that gateway is specific to the device. If the pineapple is using 192.168.1.3 on your network, try connecting to 192.168.1.3:yourporthere

After bringing myself up to speed on the RTL chip issue, I think I'll need the USB port anyway. Thanks Seb!

Correction, /mnt/./sda1 is empty (that test was done prior to a second reboot that I did not feel was worth mentioning).

I'm trying to get my 8 gb Sandisk Cruzer setup for use the MK5 but keep hitting a wall for some reason. While it appears to be mounted properly, I have no option to install to USB from the bar, though swap works correctly. I formatted and partitioned the drive into two ext4 partitions (one 6gb storage, the other 2 gb swap) and reconfigured my fstab accordingly: config global automount option from_fstab 1 option anon_mount 1 config global autoswap option from_fstab 1 option anon_swap 0 config mount option target /sd option device /dev/sdcard/sd option fstype auto option options rw,sync option enabled 1 option enabled_fsck 0 config mount option target /usb option device /dev/sda1 option fstype ext4 option options rw,sync option enabled 1 option enabled_fsck 0 config swap option device /dev/sda2 option enabled 1 Executed mkswap /dev/sda2, rebooted, and now I see: Current Disk Usage: Filesystem Size Used Available Use% Mounted on rootfs 3.6M 728.0K 2.9M 20% / /dev/root 11.5M 11.5M 0 100% /rom tmpfs 30.2M 272.0K 29.9M 1% /tmp tmpfs 512.0K 0 512.0K 0% /dev /dev/mtdblock3 3.6M 728.0K 2.9M 20% /overlay overlayfs:/overlay 3.6M 728.0K 2.9M 20% / /dev/sda1 6.0G 217.7M 5.5G 4% /usb /dev/sdcard/sd1 926.7M 48.2M 832.0M 5% /sd Current Memory Usage: total used free shared buffers Mem: 61804 42156 19648 0 6212 -/+ buffers: 35944 25860 Swap: 2580328 0 2580328 Good, right? Nah. For some reason I have no option to install to USB. I ssh'd to the box and created a test folder in the usb folder. checked /mnt/./sda1 and the test folder was there. Verified that mount has the device mapped to usb and was formatted to ext4... root@Pineapple:/# mount rootfs on / type rootfs (rw) /dev/root on /rom type squashfs (ro,relatime) proc on /proc type proc (rw,noatime) sysfs on /sys type sysfs (rw,noatime) tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime,size=30904k) tmpfs on /dev type tmpfs (rw,noatime,size=512k,mode=755) devpts on /dev/pts type devpts (rw,noatime,mode=600) /dev/mtdblock3 on /overlay type jffs2 (rw,noatime) overlayfs:/overlay on / type overlayfs (rw,relatime,lowerdir=/,upperdir=/overlay) debugfs on /sys/kernel/debug type debugfs (rw,relatime) /dev/sda1 on /usb type ext4 (rw,sync,relatime,user_xattr,barrier=1,data=ordered) /dev/sdcard/sd1 on /sd type ext4 (rw,relatime,user_xattr,barrier=1,data=ordered) none on /proc/bus/usb type usbfs (rw,relatime) I'm not sure where I went wrong? I can install to and communicate with the sd card from infusion management without any issue, but I have no option to install to USB. Did I miss something obvious? Any input is appreciated Thanks!

Mitch Try clearing browser cache, possibly? Or maybe try from another computer connected to the pineapple Edit: Issue persists for me but found help here

Thanks fringes. This worked without any problems. Super simple thanks again

Howdy I've been having an issue getting Evil Portal installed on my pineapple. Things simply hangup at "installing dependencies". I gave it over an hour and grabbed some food but upon return, it was still hung up. Rebooted, removed the injection, and redownloaded with fingers crossed that I could have it installed in a less than a few minutes, but still no go. Flashed it and tried again and again but I keep running into this same issue. Has anyone had this experience? What are this apps dependencies and can I just install them to bypass the message? (or will it check anyway?) Any advice would be greatly appreciated. I got to have some fun with version 1 of this tool on a friends pineapple and was looking forward to checkout out version 2 on my own. Thanks in advance