Jump to content


Active Members
  • Posts

  • Joined

  • Last visited

Recent Profile Visitors

799 profile views

janekong's Achievements


Newbie (1/14)

  1. Where can I buy a 12V battery that is compatible with the pineapple?
  2. Already tried that without luck. I can send network packages to the pineapple, but the pineapple does not send any packages back to the computer.
  3. Which part of the pineapple does not send a single packet don't you understand?
  4. For some reason, I can't connect to the pineapple use PoE/LAN.... When I check the details of the connection (through Windows network center), it shows thousands of send packages, but absolutely 0 received packages! It does nothing, so no IP assigments, no data about the standard gateway, nothing... Is it possible to flash the pineapple without the tftp? ar7240> setenv bootargs "board=ALFA console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd" ar7240> saveenv Saving Environment to Flash... Protect off 9F040000 ... 9F04FFFF Un-Protecting sectors 4..4 in bank 1 Un-Protected 1 sectors Erasing Flash...Erase Flash from 0x9f040000 to 0x9f04ffff in Bank # 1 First 0x4 last 0x4 sector size 0x10000 4 Erased 1 sectors Writing to Flash... write addr: 9f040000 done Protecting sectors 4..4 in bank 1 Protected 1 sectors ar7240> tftp 0x80600000 kernel.bin eth0 link down FAIL eth1 link down FAIL Using eth0 device TFTP from server; our IP address is Filename 'kernel.bin'. Load address: 0x80600000 Loading: T T T T T T T T T T Retry count exceeded; starting again eth1 link down FAIL eth0 link down FAIL Using eth1 device TFTP from server; our IP address is Filename 'kernel.bin'. Load address: 0x80600000 Loading: T T T T T T T T T T Retry count exceeded; starting again eth0 link down FAIL eth1 link down FAIL
  5. Have you tried to make the Alfa usb adapter broadcast any signal yourself? I tried it both on the computer and a 5V - 2.1A battery
  6. What does that mean? I plugged the USB on my desktop PC. Are you sure this isn't a bug? Can you make the Alfa wifi usb broadcast an Access Point signal? Please give it a try!
  7. root@Pineapple:~# udhcpc -i wlan1 udhcpc (v1.19.4) started Sending discover... Sending discover... Sending discover... Read error: Network is down, reopening socket udhcpc: bind: No such device PS: the wlan1 is on the Atheros AR9271 chipset.
  8. After a reflash, wlan0 broadcasts an Access Point signal again. I can neither make the Alfa Wifi Usb Adapter an Access Point nor a client. on the pineapple. It does recognize the Alfa as wlan1 however... But I can neither make it an Access Point nor a client. The Alfa usb adapter isn't broken. I know, because I tested the Alfa usb wifi on my desktop computer and that worked.
  9. [DHCP Request] only works on wlan0 (the pineapple itself) for me. When I try '[DHCP Request]' on the usb adapter (wlan1) it does not work... Karma does not start either... When I click start nothing happens.... 'MK4 Karma Disabled. | Start'
  10. But how do I make the wifi usb adapter show up as Access Point when searching for wifi hotspots with an external device? What does this mean? root@Pineapple:~# wifi command failed: Device or resource busy (-16) Successfully initialized wpa_supplicant Command failed: Operation not supported
  11. I can now connect the pineapple core (Atheros 11n) itself to my real wifi router. But I can't make people connect to the Pineapple access point, because it does not broadcast anything (no SSID, no signal at all)... "the card is behaving live an access point to which users can connect" <-- It does not broadcast anything at all... I already flashed it to 3.0
  12. How to fix this? config wifi-device 'radio1' option type 'mac80211' option channel '11' option hwmode '11ng' option macaddr '00:c0:ca:71:da:9d' option htmode 'HT20' list ht_capab 'SHORT-GI-20' list ht_capab 'SHORT-GI-40' list ht_capab 'RX-STBC1' list ht_capab 'DSSS_CCK-40' option disabled '0' config wifi-iface option device 'radio1' option network 'lan' option mode 'ap' option hidden '0' option ssid 'mywifihotspot'
  13. It simply does not broadcast any of the two.... I want the wifi usb card to be the client, so people can connect to the pineapple. Editting does not help...
  14. ALFA USB WiFi adapter not working as access point. Tried to turn it into an access point using the network manager infusion... Did not work! How do i fix this? How can i be sure the wifi adapter is not broken? The blue light is still working and wlan1 does show up in the network manager.
  • Create New...