PcZerokey
-
Posts
63 -
Joined
-
Last visited
Posts posted by PcZerokey
-
-
radio2 is another adapter, i have 2 in
i put " /etc/config/" and got "-ash: /etc/config/: Permission denied"
-
trying to wifi relay with the adapter hooked up, basically ICS
-
Did i set up anything wrong?
Using Mark IV V2.8.1
-
Hey i'm running 2.8 and just downloaded the module but when I click on the module the page will load but where it says "Evil Java is currently not installed" then gives the option to install to usb or directly to the pineapple storage, I can not install to either location.
deathdealerxx is right you cant fully install the module
-
the re flashing does not help using the 32 GB usb i tried installing the module and left on the pineapple for an hour or so and it did not install but when i gave it a reboot the module was installed not sure what the solution to it was, After deleting the module and trying to install it , it installed with no problems now
-
I have both , so far same results for both
-
im using 32 GB USB with partions of 28 and 8 swap space and i still cant install MITM module
-
When click install the pineapple turns of with only the power light lit
-
i purchased the elite version , so should i plug in the black radio to the usb thing connecting to the pineapple?
-
i have 3 types of Alfa adapters including the one you have but i dont understand why i need to buy "Dlink DUB-H4
" to make it work, and your picture doesnt seem to load.
-
so i bought the black radio antenna thing for nothing is what your saying?
-
i have the pineapple connected to a wall outlet with the adapter inserted into the pineapple , not using any usb port to power on the pineapple...
-
Im using ios windows7, using the black radio adapter from hak5 the adapter is insterted into the usb port of the wifi pineapple
-
Everytime I search for networks on the wlan1 radio it turns of when i enable it , it ofcourse turns on(blue) but when i search for networks it turns off someone please help me!
-
ok thx guys
-
im having this problem with wlan1 on pineapple and im trying to make it work but i keep getting this error and so far no has had this problem?... if anyone knows how to solve this please reply.
-
my bad, but thats using a normal ubunto setup its not the same in kali linux?
-
Does anyone know if you can format a 4gb usb to work with pineapple on kali linux? , If so please list/show how to do so
-
Having lots of issues.
1.Cannot Factory reset to save my life.
2. Wlan 1 will not work for anything I try. If I use wlan 0 every module works. I am using the USB radio from the hak5 store the light comes on but nothing ever works
3. Reboots all the time!!!!
Any help would be great!
-Tp
in #2 im having a similar problem with the wlan1 but im using it with the modulemanager and its not picking up any ssids and the blue light turns on like you said
-
yea i figured that out in this thread http://forums.hak5.org/index.php?/topic/29271-hit-or-miss-connection-issue/
-
ok so i solved my own question you go to the Pineapple Bar and look for network manager next to that click install to perform a wifi relay
-
Ok so I got the Network manager infusion which is needed for wifi relay but I can't get the thing to work someone help me please.
going threw the functions i found out why the wifi relay aint working the wlan1 adapter connection is giving me an error like this :
-
Well as you saw in the video I had no issues setting up my pineapple with an internet connection. Unless there is an actual hardware problem with your laptop or pineapple your not entering the information correctly. If your new to linux and the wifipineapple I can almost guarantee its a user error.
If your still having problems you should upload a video of your current setup.. your laptop, your os, the firmware your running on your pineapple, what ports your connecting too on your pineapple ie. PoE/Lan or WAN/LAN. I'm not sure this would have an effect on your connection but if you have antivirus try disabling it.
what interface are you using to send commands to the pineapple? The web UI or CLI?
after taking this into advice i repeated the process and disabled everything in the anti virus and now everything works
, i was gonna make a video but then once i disabled the anti virus the infusions were listed and now everything works thx! -
after following your video i cant ping anything, and for somethings i get this :
Bad GatewayThe process did not produce any response
, i was gonna make a video but then once i disabled the anti virus the infusions were listed and now everything works thx!
WiFi Manager
in Mark IV Infusions
Posted · Edited by PcZerokey
Execute: ifconfig
br-lan Link encap:Ethernet HWaddr 00:C0:CA:61:13:F1
inet addr:172.16.42.1 Bcast:172.16.42.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:48728 errors:0 dropped:10817 overruns:0 frame:0
TX packets:19896 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:21381882 (20.3 MiB) TX bytes:4281681 (4.0 MiB)
eth0 Link encap:Ethernet HWaddr 00:C0:CA:61:13:F1
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:88833 errors:0 dropped:0 overruns:0 frame:0
TX packets:58185 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:79156928 (75.4 MiB) TX bytes:8626441 (8.2 MiB)
Interrupt:5
eth1 Link encap:Ethernet HWaddr 00:C0:CA:61:13:F0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:4
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:603 errors:0 dropped:0 overruns:0 frame:0
TX packets:603 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:50799 (49.6 KiB) TX bytes:50799 (49.6 KiB)
wlan1 Link encap:Ethernet HWaddr 00:C0:CA:61:13:F2
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:48197 errors:0 dropped:0 overruns:0 frame:0
TX packets:77309 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6752373 (6.4 MiB) TX bytes:71076681 (67.7 MiB)