zalamander
-
Posts
21 -
Joined
-
Last visited
Posts posted by zalamander
-
-
1 minute ago, Just_a_User said:
2.4 is the latest official release.
3.0 was a token gesture at the new version however will not be supported further AFAIK. Use at your own risk, it may work for what you need, it may not.
thx mate, i really thought this was bricked. i had some plans to open it up to check what kind of chip it was but didnt come so long.. well, now i got access, gonna upgrade on the go
-
just found it, flashing it...
newest firmware is 2.4 or is still beta 3.0 good to go? -
17 minutes ago, Just_a_User said:
ok, little bit buggy, sometimes it finds recovery mode sometimes not. however, cant find factory bin file, tried use a upgrade bin but didnt work... maybe try rename it?
-
nope, still asking me for password via gui. I guess this one is bricked :/
-
tried it again but via uart but it still asking me for login/password, gotta check if something new happen if i connect via web gui but i dont think so :/
-
tried via uart, terminal ask me for a password :(
-
3 hours ago, Just_a_User said:
ok, now i feel kinda stupid now. Gonna check where my uart connector is tomorrow. Thanks mate
-
hello!
updated my mark 5 to firmware 3.0 for 2years ago and forgot where i put it and now when i found it i forgot the password
I tried dip-swiches reset but seems not to work and tried to ssh into it but mark5 is asking me for root password.
Suggestions?
thanks for reply
-
1 hour ago, simohome said:
I tried this morning to install new infusion but nothing is listed knowing that I only have the infusion by default
sorry to hear about that, for me it still feels like your mkv isnt configure right for the network, does the mkv found the wan ip?
try run traceroute wifipineapple.com and see were it fails.
....and dont make dubblepost, thats just.. wrong. -
2 hours ago, simohome said:
Concerning 3.0? Does it really worth installing it knowing that it's still in beta version
nah, not sure.
-
11 minutes ago, simohome said:
Hello zalamander,
Thank you so much for your quick reply
Yes it is connected to my home wifi through client mode.
I also tried to ping the outside world and DNS resolution through ssh
Regards,
ok, for me, running 3.0 beta on mkv its ok. I read for some hours ago they had some issues with their dns, its possible you cant access for the moment due to this issue and for the moment i dont know where mkv is downloading its plugins but if its offline, thats explains alot...
-
Just now, simohome said:
Hello everyone,
I have just upgraded my wifi pineapple to the latest version 2.4.0 manually since I couldn't do it from pineapple web gui
Now I would like to install other infusion than the default ones'
WHen I click on the pine bar and do a refresh no infusion is listed. WHat should I do to enhance my pineapple mark v
Best regards,
have you configure network correcty?
-
ok, i saw the beta 3.0, installed it, downloaded "site survey" module and made capture/deauth against my test rig... downloading the .cap file and use crunch with aircrack, after 6min it was successfull...everything worked fine, im happy however tried to submit my .cap to file to onlinehashcrack.com but they didnt like it
now i was supposed to go on next try out with "wps" module, however. the hole thing went fucked up i guess... It was like the hole web-gui stopped working, in one moment all the modules disapear and another time they were not clickable, sometimes after removal they are still avaiable i guess the whole website went down, so i went factory reset, wiped the sd-card and made restart two and a third time when i try to get the little guy stable. Some reading in hak5 forum explains bad sdcard and some say its better to store modules in the internal memory, is that really it?
For the moment it feels kinda buggy, I just wondering if beta on mkv will go stable or if i should downgrade?
oh, and rig a test-wps using virtualbox, have anyone tried setup one?
-
Not to sound rude but http://lmgtfy.com/?q...d with iptables .
A simple google for it yields a wide range of good answers.
Best Regards,
Sebkinne
heeheee.. true, but never worked with linux system so im like "dont touch if it works, if u need to touch it, let somebody do it for you"
;)
-
Mark VI (4) is the newest version. Port forwarding you will have to use iptables.
hehe, cant read letter li VI ;)
im sorry, but i have never workt with this.. but to preform the commands i need to SSH to mk4 and preform a command like
iptables -A FORWARD -i wlan0 -o eth0 -s 172.16.42.0/24
or how would you preform a portforwarding for port 8080?
thanks for reply
-
need to portforward, but can i do it in jasager mk4?
-
updated my mark4 jasager, to latest firmware. Much stuff happen sins version 1.x :)
got issues to fordward data from mark4 to internet.
this is the data from interfaces:
POE/LAN port: 172.16.42.1
USB 3g Modem: *
WAN / LAN Port: 192.168.1.117
Public internet: 47.58.3.69
this is the network setup:
internet <->openwrt1<->openwrt2<->switch<-> mark4
.. the thing is, i just want it to work as AP, i turned karma off, just to not get confused while configuring.
wrt1 assign lan ip (192.168.1.117) to mark4 (via WAN/LAN port)
Mark4 assaign ip to LAN / POE port (172.16.42.1) and via WIFI.
Mark4 assagin tablet 172.16.42.129
everything seems to work accept sending data between internet and mark4.. suggestion?
/////SOLVED//
fucking stupid i am, wnt pineapple bar -> download notwork manager -> ICS-tab -> enable at boot: yes.. share from eth1, to wlan0
Convert back to Alfa/OpenWrt normal router
in WiFi Pineapple Mark IV
Posted
this should give you a start....
http://mr-protocol.blogspot.se/2013/12/wifi-pineapple-mark-iv-clean-flash-uart.html
download stock or openwrt firmware from here...
https://wiki.openwrt.org/toh/hwdata/alfanetwork/alfanetwork_hornetub