zalamander

this should give you a start.... http://mr-protocol.blogspot.se/2013/12/wifi-pineapple-mark-iv-clean-flash-uart.html download stock or openwrt firmware from here... https://wiki.openwrt.org/toh/hwdata/alfanetwork/alfanetwork_hornetub

thx mate, i really thought this was bricked. i had some plans to open it up to check what kind of chip it was but didnt come so long.. well, now i got access, gonna upgrade on the go

just found it, flashing it... newest firmware is 2.4 or is still beta 3.0 good to go?

ok, little bit buggy, sometimes it finds recovery mode sometimes not. however, cant find factory bin file, tried use a upgrade bin but didnt work... maybe try rename it?

nope, still asking me for password via gui. I guess this one is bricked :/

tried it again but via uart but it still asking me for login/password, gotta check if something new happen if i connect via web gui but i dont think so :/

tried via uart, terminal ask me for a password :(

ok, now i feel kinda stupid now. Gonna check where my uart connector is tomorrow. Thanks mate

hello! updated my mark 5 to firmware 3.0 for 2years ago and forgot where i put it and now when i found it i forgot the password I tried dip-swiches reset but seems not to work and tried to ssh into it but mark5 is asking me for root password. Suggestions? thanks for reply

sorry to hear about that, for me it still feels like your mkv isnt configure right for the network, does the mkv found the wan ip? try run traceroute wifipineapple.com and see were it fails. ....and dont make dubblepost, thats just.. wrong.

nah, not sure.

ok, for me, running 3.0 beta on mkv its ok. I read for some hours ago they had some issues with their dns, its possible you cant access for the moment due to this issue and for the moment i dont know where mkv is downloading its plugins but if its offline, thats explains alot...

have you configure network correcty?

ok, i saw the beta 3.0, installed it, downloaded "site survey" module and made capture/deauth against my test rig... downloading the .cap file and use crunch with aircrack, after 6min it was successfull...everything worked fine, im happy however tried to submit my .cap to file to onlinehashcrack.com but they didnt like it now i was supposed to go on next try out with "wps" module, however. the hole thing went fucked up i guess... It was like the hole web-gui stopped working, in one moment all the modules disapear and another time they were not clickable, sometimes after removal they are still avaiable i guess the whole website went down, so i went factory reset, wiped the sd-card and made restart two and a third time when i try to get the little guy stable. Some reading in hak5 forum explains bad sdcard and some say its better to store modules in the internal memory, is that really it? For the moment it feels kinda buggy, I just wondering if beta on mkv will go stable or if i should downgrade? oh, and rig a test-wps using virtualbox, have anyone tried setup one?

heeheee.. true, but never worked with linux system so im like "dont touch if it works, if u need to touch it, let somebody do it for you" ;)

hehe, cant read letter li VI ;) im sorry, but i have never workt with this.. but to preform the commands i need to SSH to mk4 and preform a command like iptables -A FORWARD -i wlan0 -o eth0 -s 172.16.42.0/24 or how would you preform a portforwarding for port 8080? thanks for reply

need to portforward, but can i do it in jasager mk4?

updated my mark4 jasager, to latest firmware. Much stuff happen sins version 1.x :) got issues to fordward data from mark4 to internet. this is the data from interfaces: POE/LAN port: 172.16.42.1 USB 3g Modem: * WAN / LAN Port: 192.168.1.117 Public internet: 47.58.3.69 this is the network setup: internet <->openwrt1<->openwrt2<->switch<-> mark4 .. the thing is, i just want it to work as AP, i turned karma off, just to not get confused while configuring. wrt1 assign lan ip (192.168.1.117) to mark4 (via WAN/LAN port) Mark4 assaign ip to LAN / POE port (172.16.42.1) and via WIFI. Mark4 assagin tablet 172.16.42.129 everything seems to work accept sending data between internet and mark4.. suggestion? /////SOLVED// fucking stupid i am, wnt pineapple bar -> download notwork manager -> ICS-tab -> enable at boot: yes.. share from eth1, to wlan0