Jump to content

DeGrijze

Active Members
  • Posts

    287
  • Joined

  • Last visited

Posts posted by DeGrijze

  1. I didn't say that it can't be done, I just said that it's not looking so good.

    Oke point taken, but why do you say that?

    200 up to 700m (with L.O.S) is no problem what so ever for WiFi connection setups

    :wink:

    Gerard

  2. MMmm I remember back in the day's i was useing my Sinclare (rubber) computer i used a betamax videorecorder als tapestreamer in place of the standard audio casset tapestreamers that where to slow.

    So I think it wil be verry sweet if we can use a VHS videorecorder as a tape streaming backup divice.

    :wink:

    Gerard

  3. 200-400m of wireless... it's not looking so good.

    200-400m (with a line of site) is a distance that can be dan easly with biquad antenna's on both side's

    I even made WiFi 2,4 Gigahertz inks (with line of site) that are over 1,5 Km with (homemade) biquad antenna's

    (for this 1,5Km links the WiFi (11mbit) hardware (linksys WAP 11 the 2.6 versions one as AP and the other one as client) has bin put as closely to the biquad antenna as possible and then the hole wifi contraptions are mounted outsite and get there 5volt DC power by homemade PowerOver Ethernet (see foto below)).

    antennemast-mounting-2.jpg

    So don't say that 200-400 meters (with line of site) can't be done.

    :wink:

    Gerard

  4. Hacking computer motherboards Bios passwords is always done by means of getting your self acces to the computer motherboard.

    Some computer motherboards have a jumper setting to clear the CMOS if not so just popout ore short circuit the computer motherboard mounted battery that wil get the computer motherboards Bios back to its factory default.

    :wink:

    Gerard

  5. 3 years ago i start it a social WiFi free internet acces network.

    In this social WiFi free internet acces network we use standard WiFi hardware (accespoints en clients) that I hardware hack to fit the need.

    All the wifi antennes in this social WiFi free internet acces network are homemade, for the longer (uplink) range's we use prime focus sat: dish

    For all the other connection we use (homemade) Biquad antennes.

    All the WiFi hardware (accespoints en clients) connections to the WiFi antennes are made as short as posible and are mount it outside the DC-power for the WiFi hardware (accespoints en clients) is provide't by use of (homemade) Power Over Ethernet.

    Here are some picture's for some more details of the setup i use.

    This is the hardware hack I use to mount the wifihardware outside. (sorry the words on the foto's are in Dutch)

    senao-1.jpg

    senao-2.jpg

    senao-3.jpg

    This is me with my homemade prime focus Wifi dish (the dish is 6 foot 8 and iám 6 foot 9)

    a_80.jpg

    This homemade prime focus Wifi dish is used for a realy long range uplink (8 KM and up) the gain of this antenne is +/- 30Dbi

    This is a Wifi dish made from a 60cm prime focus sat: dish

    uplink-emmer-schans3.jpg

    This 60cm prime focus sat: dish is used for long range uplinks (between the 1 KM and 6 KM) the gain of this antenne is +/- 24 Dbi

    The cantenna's i use for all my WiFi dish's are made like in this picture

    bus-english.JPG

    For a omni-antenne I use a homemade 2x16slot's waveguide

    16x16-slots-waveguide.jpg

    For all the other not so for connection the users of the social WiFi free internet acces network make use of the WiFi biquad antenna

    zomerdag-biquad.jpg

    The gain of a needly made WiFi biquad antenne is +/- 8Dbi

    The WiFi biquads are made like in this URL http://www.engadget.com/2005/11/15/how-to-...d-dish-antenna/

    Remember alway's to use short coaxcable connections between your Wifi hardware and your Wifi antenne, and never use coax that is used for the 27Mc radio band use coax kabel that wil give low loss ad 2,4 Gigahertz.

    When and if your not useing PMCIA and of USB wifi hardware and if you have to cross over a long range between your computer/laptop and your wifi antenna mounting place its better to mount your Wifi-hardware as close to your Wifi antenna mounting point and connect this near by the WiFi antenna mounted Wifi-hardware to your computer/laptop with Cat-5 cable.

    Over this Cat-5 cable you can also feed your WiFi hardware its DC power by Power Over Ethernet.

    :wink:

    Gerard

  6. All you realy need is some neat computer hardware a internet connection and a group of people with respect for its fellow man but still know how to have fun in live.

    The group of people that wil run the lab is the most inportant factor.

    :wink:

    Gerard

  7. Just found on the first google hit: (and its Freeware)

    VSO DivXToDVD is a free tool for converting internet movie files into a DVD compatible structure. Burning can be done with CopyToDVD or any other burning tool. It supports most input formats including the files produced from your TV or Video capture card and files downloaded from internet.

    http://downloads.vnunet.com/download/32986.html

    Is this somting you can work with?

    :wink:

    Gerard

  8. Ja ik woon in Emmerhout :wink:

    Denk je dat ik dat Wifi hier nog kan ontvangen ? :P

    [Dutch] Weet ik niet weet wel dat er boven op de Bult in emmerschans gebruik gemaakt kan worden van het Wifi netwerk klik hier maar eens[/Dutch]

    [Englisch]I do not know if you can contact my WiFi network from the place you are living, i do know that if you go to the "Bult in Emmerschans" you can connect to my WiFi network with out any probs click here to see that[/Englisch]

    :wink:

    Gerard

    P.s

    The wmv-movie is shot with a "nokia" cam-phone (edith it with windows moviemaker) and the girl in this wmv-movie is one of my 6 kids (3 girls 19-14 and 7 years old and 3 boys 18-12 and 4 years old) Two of my girls (19 and 14 years) are also in to computers and (wireless) networking.

×
×
  • Create New...