Jump to content

proxy

Members
 View Profile  See their activity

  • Posts

    3

  • Joined

  • Last visited

 Content Type 

Posts posted by proxy

    Karma Stopping

    in WiFi Pineapples Mark I, II, III

    Posted

    :blink:I have just got the custom firmware with jasager up and going. The only issue that i seam to be facing is that every time I start karma is dies. I hit the refresh on my jasager web interface and it shows karma as off. Also when I have karma on it is not actually working (on my test machine everything looks normal as far as the SSIDs showing available. Also I show a open wrt SSID in the list. I had some issues flashing the fon using the ap51-flash-fonera-gui-1.0-38 it looked like it was trying to flash my wifi interface base on the MAC address shown. I ended up having to flash open wrt using redboot interface via telnet to 192.168.1.254 port 9000. I followed this guide for setup (except for the redboot firmware flashing part for that I used http://wiki.openwrt.org/toh/fon/fonera#ins...rt.with.redboot

    substituting the openwrt-atheros-2.6-vmlinux.lzma and the openwrt-atheros-2.6-root.squashfs where it called for. Below is my session starting after the openwrt firmware. Any help would be greatly appreciated and thanks in advance.

    === IMPORTANT ============================

    Use 'passwd' to set your login password

    this will disable telnet and enable SSH

    -----------------------------------------

    BusyBox v1.4.2 (2007-09-29 07:21:40 CEST) Built-in shell (ash)

    Enter 'help' for a list of built-in commands.

    _______ ________ __

    | |.-----.-----.-----.| | | |.----.| |_

    | - || _ | -__| || | | || _|| _|

    |_______|| __|_____|__|__||________||__| |____|

    |__| W I R E L E S S F R E E D O M

    KAMIKAZE (7.09) -----------------------------------

    * 10 oz Vodka Shake well with ice and strain

    * 10 oz Triple sec mixture into 10 shot glasses.

    * 10 oz lime juice Salute!

    ---------------------------------------------------

    root@OpenWrt:/# passwd

    Changing password for root

    New password:

    Bad password: too weak

    Retype password:

    Password for root changed by root

    root@OpenWrt:/# passwd

    Changing password for root

    New password:

    Retype password:

    Password for root changed by root

    root@OpenWrt:/# uci set wireless.wifi0.disabled=0

    root@OpenWrt:/# uci commit wireless && wifi

    root@OpenWrt:/# cd /tmp/

    root@OpenWrt:~# ipkg install haserl_0.8.0-2_mips.ipk

    Installing haserl (0.8.0-2) to root...

    Configuring haserl

    Done.

    root@OpenWrt:~# ipkg install webif_0.3-10_mips.ipk

    Installing webif (0.3-10) to root...

    Configuring webif

    Linux OpenWrt 2.6.21.5 #2 Sun Sep 30 20:16:16 CEST 2007 mips unknown

    Linux OpenWrt 2.6.21.5 #2 Sun Sep 30 20:16:16 CEST 2007 mips unknown

    system type : Atheros AR2315

    Linux OpenWrt 2.6.21.5 #2 Sun Sep 30 20:16:16 CEST 2007 mips unknown

    Downloading http://downloads.openwrt.org/kamikaze/7.09...6/packages/Pack

    ages

    wget: bad address 'downloads.openwrt.org'

    Downloading http://downloads.openwrt.org/kamikaze/packages/mips/Packages

    wget: bad address 'downloads.openwrt.org'

    Downloading http://downloads.x-wrt.org/xwrt/kamikaze/7...-2.6/packages/P

    ackages

    wget: bad address 'downloads.x-wrt.org'

    An error ocurred, return value: 3.

    Collected errors:

    ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp

    -q -P /tmp/ipkg-vywPZM http://downloads.openwrt.org/kamikaze/7.09/atheros-2.6/p

    ackages/Packages'

    ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp

    -q -P /tmp/ipkg-vywPZM http://downloads.openwrt.org/kamikaze/packages/mips/Pack

    ages'

    ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp

    -q -P /tmp/ipkg-vywPZM http://downloads.x-wrt.org/xwrt/kamikaze/7.09/atheros-2.

    6/packages/Packages'

    Committing new firmware id ...

    Device: La Fonera (ACCTON MR3201A)

    Committing new device id ...

    SUCCESS! Webif^2 installation appears OK. Welcome to X-Wrt!

    You may need to do a hard REFRESH to clear old CSS style from your browser.

    Reinitializing httpd ...

    Done.

    root@OpenWrt:~# ipkg install libruby_1.8.6-p36-1_mips.ipk

    Installing libruby (1.8.6-p36-1) to root...

    Configuring libruby

    Done.

    root@OpenWrt:~# ipkg install ruby_1.8.6-p36-1_mips.ipk

    Installing ruby (1.8.6-p36-1) to root...

    Configuring ruby

    Done.

    root@OpenWrt:~# ipkg install ruby-core_1.8.6-p36-1_mips.ipk

    Installing ruby-core (1.8.6-p36-1) to root...

    Configuring ruby-core

    Done.

    root@OpenWrt:~# ipkg install ruby-rexml_1.8.6-p36-1_mips.ipk

    Installing ruby-rexml (1.8.6-p36-1) to root...

    Configuring ruby-rexml

    Done.

    root@OpenWrt:~# ipkg install jasager-madwifi_1.ipk

    Installing kmod-madwifi (2.6.21.5+r2568-20070710-atheros-2) to root...

    Configuring kmod-madwifi

    Done.

    root@OpenWrt:~# ipkg install kmod-gpio_2.6.21.5-atheros-1_mips.ipk

    Installing kmod-gpio (2.6.21.5-atheros-1) to root...

    Configuring kmod-gpio

    Done.

    root@OpenWrt:~# ipkg install jasager_2.1.ipk

    Installing jasager (2) to root...

    Configuring jasager

    Install finished, testing that it worked ok

    SUCCESS! Jasager installation appears OK. Welcome to Jasager!

    To view the web interface please visit http://<fon>:1471/

    Stopping any currently running Jasager sessions

    killall: tail: no process killed

    killall: logwatch: no process killed

    Starting Jasager

    MK1: Downgrading the Fon

    in WiFi Pineapples Mark I, II, III

    Posted

    Hey just got my fon2100 and it is running firmware version: 0.7.0 r2. In the install guide for jasager it says that it needs to be 0.7.0 r1 or below. Looking for a clear way to downgrade this fon to a suitable version. I have been reading on http://stefans.datenbruch.de/lafonera/ about using a perl script grammofon.pl on a 0.7.0 r4. It this the best way to do the downgrade also is there a way to do it under windows. Thanks for any help in advance.

×
×
  • Create New...