Jump to content

GPSMON don't work.


Veasna79

Recommended Posts

Hi,
   
     I need some help. I tried to add GPS V-172 with PineApple, but it's seem not to run. It's fresh install and opkg updated.  Any clues?

Thank!

 

DMESG :

59.901167] usb 1-1.3: new full-speed USB device number 5 using ehci-platform   60.156578] cdc_acm 1-1.3:1.0: ttyACM0: USB ACM device

LSUSB :

Bus 001 Device 004: ID 148f:7601 MediaTek 802.11 n WLAN
Bus 002 Device 001: ID 1d6b:0001 Linux 5.4.154 ohci_hcd Generic Platform OHCI controller
Bus 001 Device 003: ID 148f:7601 MediaTek 802.11 n WLAN
Bus 001 Device 005: ID 1546:01a7 u-blox AG - www.u-blox.com u-blox 7 - GPS/GNSS Receiver
Bus 001 Device 002: ID 1a40:0101  USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux 5.4.154 ehci_hcd EHCI Host Controller

 

GPSD /dev/ttyAMC0 : OK no return message
 

GPSMON :  NO DATA

tcp://localhost:2947          JSON slave driver>
(82) {"class":"VERSION","release":"3.23","rev":"3.23","proto_major":3,"proto_min
or":14}
(32) {"class":"DEVICES","devices":[]}
(122) {"class":"WATCH","enable":true,"json":false,"nmea":false,"raw":2,"scaled":
false,"timing":false,"split24":false,"pps":true}

Link to comment
Share on other sites

  • 2 weeks later...

Hi,

     Here my update. I got a new device and see if I had a faulty device for the firs run... So I've made firmware update to 2.13 and package on my new device. I've also installed all modules and dependencies... Then I have installed GPSD and GPSD-CLIENT... Run GPSMON for first time, its OK... But, for the second run I got the same error like my first PineApple. I have no idea how to solve it!

Than for you reply!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...