(UCI failed to set country for radio1 exit status 1)

[simone79vi]

Hi to all,

I'm new..

I receive this error when I try to connect configure the Marc VII.
(UCI failed to set country for radio1 exit status 1)

What is wrong?
The Mark VII is connected to my laptop with the usbc cable.

I tried 3 times but the error persist
Thank you
Simone

[dark_pyrro]

What's the output of lsusb?

[simone79vi]

by ssh?

[dark_pyrro]

Yes, either ssh or use the built-in terminal in the web UI

https://docs.hak5.org/wifi-pineapple/ui-overview/introduction#web-terminal

 

[simone79vi]

thank for replay..
Everytime that I connect to the ip of the device the "begin setup" started.. so the process of activation failed with the error (UCI failed to set country for radio1 exit status 1)

Ps. Is it possibile to write only one message for days in the forum?

Thanks for help

[dark_pyrro]

There are limits for new users due to the fact that there has been "abuse" over time. Not sure what the limits are, but I think it has been 5 messages before. I.e. that you have to post 5 messages and after that, it will be possible to post with less restrictions.

32 minutes ago, simone79vi said:

Everytime that I connect to the ip of the device the "begin setup" started.. so the process of activation failed with the error (UCI failed to set country for radio1 exit status 1)

That is only happening when you try to load the web UI, right? What happens if you try to ssh into the Pineapple?

Try the diagnostics as well, if possible to reach

http://172.16.42.1:1471/api/basic-diagnostics.html

[simone79vi]

thanks for reply.. this is the info of http://172.16.42.1:1471/api/basic-diagnostics.html

about the ssh.. what is the password? I try the password that I use during the configuration but doesn't work
         
Filesystems
Filesystem                Size      Used Available Use% Mounted on
/dev/root                21.8M     21.8M         0 100% /rom
tmpfs                   123.7M     96.0K    123.6M   0% /tmp
/dev/mmcblk0              1.8G      8.2M      1.7G   0% /overlay
overlayfs:/overlay        1.8G      8.2M      1.7G   0% /
tmpfs                   512.0K         0    512.0K   0% /dev

Radios
phy0    ../../devices/platform/10300000.wmac/ieee80211/phy0
phy1    MISSING
phy2    MISSING

USB
Bus 002 Device 001: ID 1d6b:0001 Linux 5.4.154 ohci_hcd Generic Platform OHCI controller
Bus 001 Device 001: ID 1d6b:0002 Linux 5.4.154 ehci_hcd EHCI Host Controller

[dark_pyrro]

OK, looks like the internal USB hub is fried on that Pineapple. If both MT7601 radios are gone and not showing up as USB devices (or phyX devices), it's most often a sure sign that the USB hub is borked.

Regarding ssh, it should be the password you set, but if setup isn't successful (due to the problems you experience), it's probably not saved in the process.

[simone79vi]

Noooo..
so i have to contact hak5 support?

[dark_pyrro]

Yes, I would suggest creating a support ticket on that. You can refer to this thread to provide some background information in the ticket. It might be useful.

https://hak5.customerdesk.io/