simone79vi Posted August 8, 2023 Share Posted August 8, 2023 Hi to all, I'm new.. I receive this error when I try to connect configure the Marc VII. (UCI failed to set country for radio1 exit status 1) What is wrong? The Mark VII is connected to my laptop with the usbc cable. I tried 3 times but the error persist Thank you Simone Link to comment Share on other sites More sharing options...
dark_pyrro Posted August 8, 2023 Share Posted August 8, 2023 What's the output of lsusb? Link to comment Share on other sites More sharing options...
simone79vi Posted August 9, 2023 Author Share Posted August 9, 2023 by ssh? Link to comment Share on other sites More sharing options...
dark_pyrro Posted August 9, 2023 Share Posted August 9, 2023 Yes, either ssh or use the built-in terminal in the web UI https://docs.hak5.org/wifi-pineapple/ui-overview/introduction#web-terminal Link to comment Share on other sites More sharing options...
simone79vi Posted August 10, 2023 Author Share Posted August 10, 2023 thank for replay.. Everytime that I connect to the ip of the device the "begin setup" started.. so the process of activation failed with the error (UCI failed to set country for radio1 exit status 1) Ps. Is it possibile to write only one message for days in the forum? Thanks for help Link to comment Share on other sites More sharing options...
dark_pyrro Posted August 10, 2023 Share Posted August 10, 2023 There are limits for new users due to the fact that there has been "abuse" over time. Not sure what the limits are, but I think it has been 5 messages before. I.e. that you have to post 5 messages and after that, it will be possible to post with less restrictions. 32 minutes ago, simone79vi said: Everytime that I connect to the ip of the device the "begin setup" started.. so the process of activation failed with the error (UCI failed to set country for radio1 exit status 1) That is only happening when you try to load the web UI, right? What happens if you try to ssh into the Pineapple? Try the diagnostics as well, if possible to reach http://172.16.42.1:1471/api/basic-diagnostics.html Link to comment Share on other sites More sharing options...
simone79vi Posted August 10, 2023 Author Share Posted August 10, 2023 thanks for reply.. this is the info of http://172.16.42.1:1471/api/basic-diagnostics.html about the ssh.. what is the password? I try the password that I use during the configuration but doesn't work Filesystems Filesystem Size Used Available Use% Mounted on /dev/root 21.8M 21.8M 0 100% /rom tmpfs 123.7M 96.0K 123.6M 0% /tmp /dev/mmcblk0 1.8G 8.2M 1.7G 0% /overlay overlayfs:/overlay 1.8G 8.2M 1.7G 0% / tmpfs 512.0K 0 512.0K 0% /dev Radios phy0 ../../devices/platform/10300000.wmac/ieee80211/phy0 phy1 MISSING phy2 MISSING USB Bus 002 Device 001: ID 1d6b:0001 Linux 5.4.154 ohci_hcd Generic Platform OHCI controller Bus 001 Device 001: ID 1d6b:0002 Linux 5.4.154 ehci_hcd EHCI Host Controller Link to comment Share on other sites More sharing options...
dark_pyrro Posted August 10, 2023 Share Posted August 10, 2023 OK, looks like the internal USB hub is fried on that Pineapple. If both MT7601 radios are gone and not showing up as USB devices (or phyX devices), it's most often a sure sign that the USB hub is borked. Regarding ssh, it should be the password you set, but if setup isn't successful (due to the problems you experience), it's probably not saved in the process. Link to comment Share on other sites More sharing options...
simone79vi Posted August 10, 2023 Author Share Posted August 10, 2023 Noooo.. so i have to contact hak5 support? Link to comment Share on other sites More sharing options...
dark_pyrro Posted August 10, 2023 Share Posted August 10, 2023 Yes, I would suggest creating a support ticket on that. You can refer to this thread to provide some background information in the ticket. It might be useful. https://hak5.customerdesk.io/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.