My previous post had some errors with closing spoilers and I can't edit or delete it, so here it is again.
Hello Everyone
Yesterday I got my first nano (yay me :D) and couldn't get the SD card to work. It did show up as `/dev/sda`. I changed the fstab but that didn't change anything. I tried different card formattings (ext4, exFat, etc) and even the "Format SD Card" option didn't work (nothing happened after pressing it). I am usig the latest FW 2.6.0.
df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 13312 13312 0 100% /rom
tmpfs 29784 196 29588 1% /tmp
/dev/mtdblock3 1280 260 1020 20% /overlay
overlayfs:/overlay 1280 260 1020 20% /
tmpfs 512 0 512 0% /dev
fdisk -l
Disk /dev/sda: 30 GB, 31708938240 bytes, 61931520 sectors
30240 cylinders, 64 heads, 32 sectors/track
Units: sectors of 1 * 512 = 512 bytes
After a long night I figured it out. If your problem looks the same this might help you. Here's how I did it:
Format SD Card cat /pineapple/modules/Advanced/formatSD/fdisk_options | fdisk /dev/sda
mkfs.ext4 /dev/sda1
mkfs.ext4 /dev/sda2
mkswap /dev/sda2
mkdir /sd
change fstab to:
config global
option anon_swap '0'
option anon_mount '0'
option auto_swap '1'
option auto_mount '1'
option delay_root '5'
option check_fs '0'
config mount
option target '/sd'
option device '/dev/sda1'
option fstype 'auto'
option options 'rw,sync'
option enabled '1'
config 'swap'
option device '/dev/sda2'
option enabled '1'
Reboot and the SD Card should be mounted.
