Ch4s3r
-
Posts
2 -
Joined
-
Last visited
Posts posted by Ch4s3r
-
-
Hi,
my ducky worked fine for one day, then after plugging it out and in again it just stopped working.
It just lights up very shortly with a red led.
I then tried to flash a new firmware.
After that it just lights up with a permanent solid red led when plugged in and I'm not able to flash a firmware again.
Here is the output of my flashing process:sudo dfu-programmer at32uc3b1256 erase --force sudo dfu-programmer at32uc3b1256 flash --suppress-bootloader-mem c_duck_v2.1.hex sudo dfu-programmer at32uc3b1256 reset [sudo] password for User: Erasing flash... Success Checking memory from 0x2000 to 0x3FFFF... Empty. Error reading line 1.
Before flashing I removed the micro sd card.
Do you have any suggestions what else I could try?
Bricked Ducky?
in Classic USB Rubber Ducky
Posted
I found my mistake: https://github.com/emsec/ChameleonMini/issues/88#issuecomment-284179380
I downloaded the twin duck firmware with the following command:
wget https://github.com/hak5darren/USB-Rubber-Ducky/blob/master/Firmware/Images/c_duck_v2.1.hex
But this downloaded the html version and not the RAW hex file.
The correct command would be:
wget https://raw.githubusercontent.com/hak5darren/USB-Rubber-Ducky/master/Firmware/Images/c_duck_v2.1.hex