Jump to content

crystal

Active Members
  • Posts

    16
  • Joined

  • Last visited

Everything posted by crystal

  1. There is a SSLstrip module, but I don't know why it has not been released yet. Check this post. Also, there is a custom script for SSLstrip2, but it's not in a module format.
  2. Bettercap's dev has some words about working with NANO in this blog post.
  3. WhatsApp uses end-to-end encryption, so no man-in-the-middle is able to eavesdrops the messages.
  4. Hi Zylla. You probably already read this, but evilsocket (Bettercap's creators) has already tried to make Bettercap works on NANO, without much success. Here is a excerpt from his blog:
  5. Not a dumb question at all. I tried to do a lot of things in NANO that should not require an internet connection and I fell short of achieving any success. For example, If you try to use Evil Portal module, even if you want to just show the portal to the victims and don't want to provide them internet connection at all, you will not able to do that. Some people mentioned in the forums that's not a fail in the module, but I could not get the details. So, as a rule of thumb, provide internet connection if you can. Also, keep in mind that you cannot connect your NANO to the internet via Wifi using the default setup (2 antennas) and turn on PineAP at same time. That's because PineAP uses those 2 antennas to work. You have to buy an additional wifi adapter in order to do that.
  6. What's the proper way to supply power straight from an wall outlet to NANO?
  7. Nevermind. It's working fine after a formatting.
  8. The Def Con you mentioned was held in 2014, before NANO was released (news link). According to the news, Hak5 fixed the bug used by the attacker. Don't think it's related to the one I mentioned in this thread.
  9. Hi everyone. Devices that connect to the an open AP (from PineAP SSID Pool) can browse to the management page (172.16.42.1:1471). I guess that access is supposed to be allowed only for devices connected on Management AP. The error persist even after a firmware reset. Does anybody know to fix it?
  10. Also, logread output (Hak5 forum security features didn't allow me to post the whole output, so I cut what seems to be relevant). Fri Oct 27 12:35:17 2017 user.info kernel: [ 8.110000] procd: - ubus - Fri Oct 27 12:35:17 2017 kern.notice kernel: [ 8.560000] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 0933 PQ: 0 ANSI: 6 Fri Oct 27 12:35:17 2017 kern.notice kernel: [ 8.930000] sd 0:0:0:0: [sda] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) Fri Oct 27 12:35:17 2017 kern.notice kernel: [ 8.940000] sd 0:0:0:0: [sda] Write Protect is off Fri Oct 27 12:35:17 2017 kern.debug kernel: [ 8.940000] sd 0:0:0:0: [sda] Mode Sense: 21 00 00 00 Fri Oct 27 12:35:17 2017 kern.notice kernel: [ 8.940000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA Fri Oct 27 12:35:17 2017 kern.info kernel: [ 8.990000] sda: sda1 Fri Oct 27 12:35:17 2017 kern.notice kernel: [ 9.010000] sd 0:0:0:0: [sda] Attached SCSI removable disk Fri Oct 27 12:35:17 2017 user.info kernel: [ 9.250000] procd: - init - Fri Oct 27 12:35:17 2017 kern.info kernel: [ 13.700000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68 Fri Oct 27 12:35:17 2017 kern.info kernel: [ 13.710000] Backport generated by backports.git backports-20151218-0-g2f58d9d Fri Oct 27 12:35:17 2017 kern.debug kernel: [ 13.890000] ath: EEPROM regdomain: 0x0 Fri Oct 27 12:35:17 2017 kern.debug kernel: [ 13.890000] ath: EEPROM indicates default country code should be used Fri Oct 27 12:35:17 2017 kern.debug kernel: [ 13.890000] ath: doing EEPROM country->regdmn map search Fri Oct 27 12:35:17 2017 kern.debug kernel: [ 13.890000] ath: country maps to regdmn code: 0x3a Fri Oct 27 12:35:17 2017 kern.debug kernel: [ 13.890000] ath: Country alpha2 being used: US Fri Oct 27 12:35:17 2017 kern.debug kernel: [ 13.890000] ath: Regpair used: 0x3a Fri Oct 27 12:35:17 2017 kern.debug kernel: [ 13.900000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Fri Oct 27 12:35:17 2017 kern.info kernel: [ 13.910000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2 Fri Oct 27 12:35:17 2017 kern.info kernel: [ 13.920000] usb 1-1.1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested Fri Oct 27 12:35:17 2017 kern.info kernel: [ 13.930000] usb 1-1.3: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested Fri Oct 27 12:35:17 2017 kern.info kernel: [ 13.940000] usbcore: registered new interface driver ath9k_htc Fri Oct 27 12:35:17 2017 kern.info kernel: [ 13.970000] RPC: Registered named UNIX socket transport module. Fri Oct 27 12:35:17 2017 kern.info kernel: [ 13.980000] RPC: Registered udp transport module. Fri Oct 27 12:35:17 2017 kern.info kernel: [ 13.980000] RPC: Registered tcp transport module. Fri Oct 27 12:35:17 2017 kern.info kernel: [ 13.990000] RPC: Registered tcp NFSv4.1 backchannel transport module. Fri Oct 27 12:35:17 2017 kern.info kernel: [ 14.030000] tun: Universal TUN/TAP device driver, 1.6 Fri Oct 27 12:35:17 2017 kern.info kernel: [ 14.030000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> Fri Oct 27 12:35:17 2017 kern.info kernel: [ 14.080000] usbcore: registered new interface driver rt2800usb Fri Oct 27 12:35:17 2017 kern.info kernel: [ 14.100000] usbcore: registered new interface driver rtl8187 Fri Oct 27 12:35:17 2017 kern.info kernel: [ 14.170000] usbcore: registered new interface driver rtl8192cu Fri Oct 27 12:35:17 2017 kern.notice kernel: [ 14.210000] sd 0:0:0:0: Attached scsi generic sg0 type 0 Fri Oct 27 12:35:17 2017 kern.info kernel: [ 14.230000] usbcore: registered new interface driver cdc_acm
  11. Got the same problem as OP. @Foxtrot, do you mind take a look at my logs? root@Pineapple:~# dmesg [ 0.000000] Linux version 3.18.36 (openwrt@651d0feeed27) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49403) ) #40 Fri Oct 28 05:42:22 UTC 2016 [ 0.000000] MyLoader: sysp=8a14b024, boardp=44b65156, parts=b69f8d32 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc) [ 0.000000] SoC: Atheros AR9330 rev 1 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 04000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x03ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x03ffffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff] [ 0.000000] On node 0 totalpages: 16384 [ 0.000000] free_area_init_node: node 0, pgdat 80355cf0, node_mem_map 81000000 [ 0.000000] Normal zone: 128 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 16384 pages, LIFO batch:3 [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: board=PINEAPPLE-NANO console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 60944K/65536K available (2467K kernel code, 126K rwdata, 528K rodata, 260K init, 188K bss, 4592K reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:51 [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) [ 0.080000] pid_max: default: 32768 minimum: 301 [ 0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.100000] NET: Registered protocol family 16 [ 0.100000] MIPS: machine is WiFi Pineapple NANO [ 0.380000] Switched to clocksource MIPS [ 0.380000] NET: Registered protocol family 2 [ 0.390000] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.390000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.400000] TCP: Hash tables configured (established 1024 bind 1024) [ 0.400000] TCP: reno registered [ 0.410000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.410000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.420000] NET: Registered protocol family 1 [ 0.420000] PCI: CLS 0 bytes, default 32 [ 0.420000] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.440000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.440000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.450000] msgmni has been set to 119 [ 0.460000] io scheduler noop registered [ 0.460000] io scheduler deadline registered (default) [ 0.470000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 0.470000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a AR933X UART [ 0.480000] console [ttyATH0] enabled [ 0.490000] bootconsole [early0] disabled [ 0.500000] m25p80 spi0.0: found mx25l12805d, expected m25p80 [ 0.500000] m25p80 spi0.0: mx25l12805d (16384 Kbytes) [ 0.520000] 5 tp-link partitions found on MTD device spi0.0 [ 0.520000] Creating 5 MTD partitions on "spi0.0": [ 0.520000] 0x000000000000-0x000000020000 : "u-boot" [ 0.530000] 0x000000020000-0x000000134f84 : "kernel" [ 0.540000] 0x000000134f84-0x000000ff0000 : "rootfs" [ 0.540000] mtd: device 2 (rootfs) set to be root filesystem [ 0.550000] 1 squashfs-split partitions found on MTD device rootfs [ 0.550000] 0x000000dc0000-0x000000ff0000 : "rootfs_data" [ 0.560000] 0x000000ff0000-0x000001000000 : "art" [ 0.560000] 0x000000020000-0x000000ff0000 : "firmware" [ 0.590000] libphy: ag71xx_mdio: probed [ 1.190000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY] [ 1.200000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII [ 1.200000] TCP: cubic registered [ 1.200000] NET: Registered protocol family 17 [ 1.210000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 1.220000] 8021q: 802.1Q VLAN Support v1.8 [ 1.230000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2. [ 1.240000] Freeing unused kernel memory: 260K (8036f000 - 803b0000) [ 2.620000] init: Console is alive [ 2.620000] init: - watchdog - [ 5.290000] usbcore: registered new interface driver usbfs [ 5.300000] usbcore: registered new interface driver hub [ 5.300000] usbcore: registered new device driver usb [ 5.360000] SCSI subsystem initialized [ 5.370000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.380000] ehci-platform: EHCI generic platform driver [ 5.380000] ehci-platform ehci-platform: EHCI Host Controller [ 5.390000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1 [ 5.400000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000 [ 5.420000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00 [ 5.420000] hub 1-0:1.0: USB hub found [ 5.420000] hub 1-0:1.0: 1 port detected [ 5.430000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.440000] ohci-platform: OHCI generic platform driver [ 5.450000] uhci_hcd: USB Universal Host Controller Interface driver [ 5.460000] usbcore: registered new interface driver usb-storage [ 5.690000] init: - preinit - [ 5.800000] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 6.390000] random: procd urandom read with 10 bits of entropy available [ 6.390000] hub 1-1:1.0: USB hub found [ 6.400000] hub 1-1:1.0: 4 ports detected [ 6.670000] mount_root: loading kmods from internal overlay [ 6.970000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform [ 7.070000] jffs2: notice: (325) jffs2_build_xattr_subsystem: complete building xattr subsystem, 4 of xdatum (0 unchecked, 4 orphan) and 4 of xref (0 dead, 4 orphan) found. [ 7.090000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab [ 7.100000] block: extroot: not configured [ 7.160000] jffs2: notice: (322) jffs2_build_xattr_subsystem: complete building xattr subsystem, 4 of xdatum (0 unchecked, 4 orphan) and 4 of xref (0 dead, 4 orphan) found. [ 7.240000] usb 1-1.2: new high-speed USB device number 4 using ehci-platform [ 7.290000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab [ 7.300000] block: extroot: not configured [ 7.310000] mount_root: switching to jffs2 overlay [ 7.360000] procd: - early - [ 7.370000] procd: - watchdog - [ 7.550000] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 7.550000] scsi host0: usb-storage 1-1.2:1.0 [ 7.720000] usb 1-1.3: new high-speed USB device number 5 using ehci-platform [ 8.110000] procd: - ubus - [ 8.560000] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 0933 PQ: 0 ANSI: 6 [ 8.930000] sd 0:0:0:0: [sda] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) [ 8.940000] sd 0:0:0:0: [sda] Write Protect is off [ 8.940000] sd 0:0:0:0: [sda] Mode Sense: 21 00 00 00 [ 8.940000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 8.990000] sda: sda1 [ 9.010000] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 9.250000] procd: - init - [ 13.700000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68 [ 13.710000] Backport generated by backports.git backports-20151218-0-g2f58d9d [ 13.890000] ath: EEPROM regdomain: 0x0 [ 13.890000] ath: EEPROM indicates default country code should be used [ 13.890000] ath: doing EEPROM country->regdmn map search [ 13.890000] ath: country maps to regdmn code: 0x3a [ 13.890000] ath: Country alpha2 being used: US [ 13.890000] ath: Regpair used: 0x3a [ 13.900000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 13.910000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2 [ 13.920000] usb 1-1.1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested [ 13.930000] usb 1-1.3: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested [ 13.940000] usbcore: registered new interface driver ath9k_htc [ 13.970000] RPC: Registered named UNIX socket transport module. [ 13.980000] RPC: Registered udp transport module. [ 13.980000] RPC: Registered tcp transport module. [ 13.990000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 14.030000] tun: Universal TUN/TAP device driver, 1.6 [ 14.030000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 14.080000] usbcore: registered new interface driver rt2800usb [ 14.100000] usbcore: registered new interface driver rtl8187 [ 14.170000] usbcore: registered new interface driver rtl8192cu [ 14.210000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 14.230000] usbcore: registered new interface driver cdc_acm [ 14.230000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 14.240000] usbcore: registered new interface driver cdc_wdm [ 14.270000] nf_conntrack version 0.5.0 (956 buckets, 3824 max) [ 14.290000] usb 1-1.3: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [ 14.300000] usb 1-1.1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [ 14.350000] usbcore: registered new interface driver ums-alauda [ 14.370000] usbcore: registered new interface driver ums-cypress [ 14.380000] usbcore: registered new interface driver ums-datafab [ 14.390000] usbcore: registered new interface driver ums-freecom [ 14.390000] usbcore: registered new interface driver ums-isd200 [ 14.400000] usbcore: registered new interface driver ums-jumpshot [ 14.410000] usbcore: registered new interface driver ums-karma [ 14.410000] usbcore: registered new interface driver ums-sddr09 [ 14.420000] usbcore: registered new interface driver ums-sddr55 [ 14.430000] usbcore: registered new interface driver ums-usbat [ 14.450000] usbcore: registered new interface driver usbserial [ 14.460000] usbcore: registered new interface driver usbserial_generic [ 14.470000] usbserial: USB Serial support registered for generic [ 14.520000] xt_time: kernel timezone is -0000 [ 14.530000] usbcore: registered new interface driver asix [ 14.540000] usbcore: registered new interface driver ax88179_178a [ 14.550000] usbcore: registered new interface driver cdc_ether [ 14.560000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 14.570000] ath9k_htc 1-1.3:1.0: ath9k_htc: HTC initialized with 33 credits [ 14.580000] ath9k_htc 1-1.1:1.0: ath9k_htc: HTC initialized with 33 credits [ 14.600000] usbcore: registered new interface driver pl2303 [ 14.600000] usbserial: USB Serial support registered for pl2303 [ 14.620000] PPP generic driver version 2.4.2 [ 14.620000] NET: Registered protocol family 24 [ 14.630000] usbcore: registered new interface driver qmi_wwan [ 14.640000] usbcore: registered new interface driver rndis_host [ 14.650000] usbcore: registered new interface driver sierra_net [ 14.670000] usbcore: registered new interface driver option [ 14.670000] usbserial: USB Serial support registered for GSM modem (1-port) [ 14.870000] ath9k_htc 1-1.1:1.0: ath9k_htc: FW Version: 1.4 [ 14.880000] ath9k_htc 1-1.1:1.0: FW RMW support: On [ 14.880000] ath: EEPROM regdomain: 0x0 [ 14.880000] ath: EEPROM indicates default country code should be used [ 14.880000] ath: doing EEPROM country->regdmn map search [ 14.880000] ath: country maps to regdmn code: 0x3a [ 14.880000] ath: Country alpha2 being used: US [ 14.880000] ath: Regpair used: 0x3a [ 14.890000] ieee80211 phy2: Atheros AR9271 Rev:1 [ 14.920000] ath9k_htc 1-1.3:1.0: ath9k_htc: FW Version: 1.4 [ 14.930000] ath9k_htc 1-1.3:1.0: FW RMW support: On [ 14.930000] ath: EEPROM regdomain: 0x809c [ 14.930000] ath: EEPROM indicates we should expect a country code [ 14.930000] ath: doing EEPROM country->regdmn map search [ 14.930000] ath: country maps to regdmn code: 0x52 [ 14.930000] ath: Country alpha2 being used: CN [ 14.930000] ath: Regpair used: 0x52 [ 14.940000] ieee80211 phy1: Atheros AR9271 Rev:1 [ 24.000000] device eth0 entered promiscuous mode [ 24.200000] random: nonblocking pool is initialized [ 29.840000] device wlan0 entered promiscuous mode [ 30.060000] br-lan: port 2(wlan0) entered forwarding state [ 30.060000] br-lan: port 2(wlan0) entered forwarding state [ 30.180000] device wlan0-1 entered promiscuous mode [ 30.200000] br-lan: port 3(wlan0-1) entered forwarding state [ 30.200000] br-lan: port 3(wlan0-1) entered forwarding state [ 30.750000] br-lan: port 3(wlan0-1) entered disabled state [ 32.060000] br-lan: port 2(wlan0) entered forwarding state [ 33.180000] br-lan: port 3(wlan0-1) entered forwarding state [ 33.180000] br-lan: port 3(wlan0-1) entered forwarding state [ 35.180000] br-lan: port 3(wlan0-1) entered forwarding state [ 89.520000] eth0: link up (100Mbps/Full duplex) [ 89.520000] br-lan: port 1(eth0) entered forwarding state [ 89.530000] br-lan: port 1(eth0) entered forwarding state [ 91.530000] br-lan: port 1(eth0) entered forwarding state
  12. Hi @Zylla, I know this is not your main project, but it would be great if you turn this into a module. The official SSLstrip module is on hold and you are my last hope .
  13. SSLsplit is not the same as SSLstrip. @Whistle Master Are you still working on this module?
  14. Hi guys. I got my NANO a couple of weeks ago and I`ve found this weird behavior. If my SSID pool (from PineAP) is broadcasting more then one SSID at the same time, I can`t make a client to connect. If there is just one SSID, everything works fine, but then if I put one more SSID into the pool, the connection drops instantly. Does anybody know how to fix it?
×
×
  • Create New...