Yvette
-
Posts
4 -
Joined
-
Last visited
Posts posted by Yvette
-
-
Thank you,
MOde:monitor is ok now.
I am using the latest version of all apps.
1)What is the best arguments for Reaver to run in modern routers?
2)I tried Bully but i was getting "WPS lockout reported, ...43 minutes". Any ideas on this one.
If it was mac address the problem, then a simple script to run macchanger between each tries is a solution?
The router i am testing are :
New one, ZTE Speedport Entry 2i
TP-Link TL-WR741ND
-
Hi,
Sorry for the slow reply.
@ZaraByte I am using TP-Link TW722N. The wireless adapter is in one corner of the room and in the other corner is the router TP-Link WR741ND. The antennas are correct. I am trying to crack wpa2 with wps on a free router that i got.
I made a new sd card with a fresh Raspberry Jessie and installed everything.
My card is listed in:
iwconfig:
wlan0 IEEE 802.11bgn ESSID:"Ecocare" Mode:Managed Frequency:2.437 GHz Access Point: 94:A7:B7:39:34:2C Bit Rate=108 Mb/s Tx-Power=20 dBm Retry short limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=30/70 Signal level=-80 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:80 Missed beacon:0 lo no wireless extensions. eth0 no wireless extensions.lsusb:
Bus 001 Device 008: ID 125f:312b A-DATA Technology Co., Ltd. Superior S102 Pro Bus 001 Device 007: ID 04f3:0103 Elan Microelectronics Corp. ActiveJet K-2024 Multimedia Keyboard Bus 001 Device 006: ID 045e:0084 Microsoft Corp. Basic Optical Mouse Bus 001 Device 005: ID 0451:2046 Texas Instruments, Inc. TUSB2046 Hub Bus 001 Device 004: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
dmesg:
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.17+ (dc4@dc4-XPS13-9333) (gcc version 4.8.3 20140303 (prerelease) (crosstool-NG linaro-1.13.1+bzr2650 - Linaro GCC 2014.03) ) #838 Tue Feb 9 12:57:10 GMT 2016 [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: Raspberry Pi Model B Rev 2 [ 0.000000] cma: Reserved 8 MiB at 0x1b400000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 114688 [ 0.000000] free_area_init_node: node 0, pgdat c0833994, node_mem_map db010000 [ 0.000000] Normal zone: 1008 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 114688 pages, LIFO batch:31 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113680 [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1184 bcm2708_fb.fbheight=624 bcm2708.boardrev=0x100000e bcm2708.serial=0x9196518b smsc95xx.macaddr=B8:27:EB:96:51:8B bcm2708_fb.fbswap=1 bcm2708.uart_clock=3000000 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 436860K/458752K available (5771K kernel code, 488K rwdata, 1788K rodata, 348K init, 720K bss, 13700K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xdc800000 - 0xff000000 ( 552 MB) lowmem : 0xc0000000 - 0xdc000000 ( 448 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc076a0cc (7561 kB) .init : 0xc076b000 - 0xc07c2000 ( 348 kB) .data : 0xc07c2000 - 0xc083c278 ( 489 kB) .bss : 0xc083c278 - 0xc08f03e0 ( 721 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:522 [ 0.000000] clocksource stc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000013] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000052] Switching to timer-based delay loop, resolution 1000ns [ 0.000333] Console: colour dummy device 80x30 [ 0.001248] console [tty1] enabled [ 0.001302] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000) [ 0.001381] pid_max: default: 32768 minimum: 301 [ 0.001746] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001811] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.002855] Initializing cgroup subsys blkio [ 0.002943] Initializing cgroup subsys memory [ 0.003007] Initializing cgroup subsys devices [ 0.003065] Initializing cgroup subsys freezer [ 0.003121] Initializing cgroup subsys net_cls [ 0.003231] CPU: Testing write buffer coherency: ok [ 0.003343] ftrace: allocating 19733 entries in 58 pages [ 0.105682] Setting up static identity map for 0x81c0 - 0x81f8 [ 0.107800] devtmpfs: initialized [ 0.118432] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5 [ 0.118889] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.120825] pinctrl core: initialized pinctrl subsystem [ 0.121733] NET: Registered protocol family 16 [ 0.127307] DMA: preallocated 4096 KiB pool for atomic coherent allocations [ 0.128797] bcm2708.uart_clock = 3000000 [ 0.133645] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers. [ 0.133723] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.133931] Serial: AMBA PL011 UART driver [ 0.134236] 20201000.uart: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev2 [ 0.509091] console [ttyAMA0] enabled [ 0.513490] bcm2835-mbox 2000b880.mailbox: mailbox enabled [ 0.559040] bcm2708-dmaengine 20007000.dma: DMA legacy API manager at f2007000, dmachans=0xf35 [ 0.567890] bcm2708-dmaengine 20007000.dma: Initialized 7 DMA channels (+ 1 legacy) [ 0.576384] bcm2708-dmaengine 20007000.dma: Load BCM2835 DMA engine driver [ 0.583360] bcm2708-dmaengine 20007000.dma: dma_debug:0 [ 0.589467] SCSI subsystem initialized [ 0.593657] usbcore: registered new interface driver usbfs [ 0.599300] usbcore: registered new interface driver hub [ 0.604902] usbcore: registered new device driver usb [ 0.610871] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-02-01 17:51 [ 0.646678] Switched to clocksource stc [ 0.695887] FS-Cache: Loaded [ 0.699262] CacheFiles: Loaded [ 0.717458] NET: Registered protocol family 2 [ 0.723295] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.730563] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.737171] TCP: Hash tables configured (established 4096 bind 4096) [ 0.743770] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.749728] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.756394] NET: Registered protocol family 1 [ 0.761431] RPC: Registered named UNIX socket transport module. [ 0.767486] RPC: Registered udp transport module. [ 0.772219] RPC: Registered tcp transport module. [ 0.776985] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.784742] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available [ 0.793875] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.816010] VFS: Disk quotas dquot_6.6.0 [ 0.820543] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.830156] FS-Cache: Netfs 'nfs' registered for caching [ 0.836945] NFS: Registering the id_resolver key type [ 0.842161] Key type id_resolver registered [ 0.846374] Key type id_legacy registered [ 0.854143] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.862147] io scheduler noop registered [ 0.866139] io scheduler deadline registered (default) [ 0.871813] io scheduler cfq registered [ 0.878160] BCM2708FB: allocated DMA memory 5b800000 [ 0.883239] BCM2708FB: allocated DMA channel 0 @ f2007000 [ 0.899524] Console: switching to colour frame buffer device 148x39 [ 0.913655] Serial: 8250/16550 driver, 0 ports, IRQ sharing disabled [ 0.921832] vc-cma: Videocore CMA driver [ 0.925878] vc-cma: vc_cma_base = 0x00000000 [ 0.930755] vc-cma: vc_cma_size = 0x00000000 (0 MiB) [ 0.939122] vc-cma: vc_cma_initial = 0x00000000 (0 MiB) [ 0.947787] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB) [ 0.978505] brd: module loaded [ 0.993666] loop: module loaded [ 1.000998] vchiq: vchiq_init_state: slot_zero = 0xdb880000, is_master = 0 [ 1.012945] Loading iSCSI transport class v2.0-870. [ 1.022495] usbcore: registered new interface driver smsc95xx [ 1.031473] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.240508] Core Release: 2.80a [ 1.246584] Setting default values for core params [ 1.254347] Finished setting default values for core params [ 1.463218] Using Buffer DMA mode [ 1.469582] Periodic Transfer Interrupt Enhancement - disabled [ 1.478401] Multiprocessor Interrupt Enhancement - disabled [ 1.486944] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 1.494232] Dedicated Tx FIFOs mode [ 1.501109] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xdb814000 dma = 0x5b814000 len=9024 [ 1.514015] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints [ 1.542179] dwc_otg: Microframe scheduler enabled [ 1.542306] WARN::hcd_init_fiq:412: FIQ on core 0 at 0xc03d7f70 [ 1.551165] WARN::hcd_init_fiq:413: FIQ ASM at 0xc03d8248 length 36 [ 1.560230] WARN::hcd_init_fiq:438: MPHI regs_base at 0xdc896000 [ 1.569183] dwc_otg 20980000.usb: DWC OTG Controller [ 1.577116] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1 [ 1.587468] dwc_otg 20980000.usb: irq 32, io mem 0x00000000 [ 1.595988] Init: Port Power? op_state=1 [ 1.602856] Init: Power Port (0) [ 1.609334] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.619124] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.629280] usb usb1: Product: DWC OTG Controller [ 1.636934] usb usb1: Manufacturer: Linux 4.1.17+ dwc_otg_hcd [ 1.645626] usb usb1: SerialNumber: 20980000.usb [ 1.654352] hub 1-0:1.0: USB hub found [ 1.661269] hub 1-0:1.0: 1 port detected [ 1.668711] dwc_otg: FIQ enabled [ 1.668731] dwc_otg: NAK holdoff enabled [ 1.668743] dwc_otg: FIQ split-transaction FSM enabled [ 1.668797] Module dwc_common_port init [ 1.669344] usbcore: registered new interface driver usb-storage [ 1.678881] mousedev: PS/2 mouse device common for all mice [ 1.688644] bcm2835-cpufreq: min=700000 max=700000 [ 1.696869] sdhci: Secure Digital Host Controller Interface driver [ 1.705968] sdhci: Copyright(c) Pierre Ossman [ 1.713903] mmc-bcm2835 20300000.mmc: mmc_debug:0 mmc_debug2:0 [ 1.722751] mmc-bcm2835 20300000.mmc: DMA channels allocated [ 1.767307] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.776424] ledtrig-cpu: registered to indicate activity on CPUs [ 1.785769] hidraw: raw HID events driver (C) Jiri Kosina [ 1.801019] usbcore: registered new interface driver usbhid [ 1.809537] usbhid: USB HID core driver [ 1.818981] Initializing XFRM netlink socket [ 1.826167] NET: Registered protocol family 17 [ 1.833684] Key type dns_resolver registered [ 1.852296] registered taskstats version 1 [ 1.859787] vc-sm: Videocore shared memory driver [ 1.867585] Indeed it is in host mode hprt0 = 00021501 [ 1.935468] [vc_sm_connected_init]: start [ 1.943751] [vc_sm_connected_init]: end - returning 0 [ 1.954293] Waiting for root device /dev/mmcblk0p2... [ 1.967530] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.980600] mmc0: new high speed SDHC card at address b368 [ 1.989853] mmcblk0: mmc0:b368 NCard 7.48 GiB [ 1.999020] mmcblk0: p1 p2 [ 2.076805] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 2.087322] Indeed it is in host mode hprt0 = 00001101 [ 2.158145] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.169445] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.180829] devtmpfs: mounted [ 2.188034] Freeing unused kernel memory: 348K (c076b000 - c07c2000) [ 2.317238] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 2.327263] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.339212] hub 1-1:1.0: USB hub found [ 2.347332] hub 1-1:1.0: 5 ports detected [ 2.606867] random: systemd urandom read with 63 bits of entropy available [ 2.623359] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) [ 2.643219] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 2.653862] systemd[1]: Detected architecture 'arm'. [ 2.777285] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 2.787764] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.823138] smsc95xx v1.0.4 [ 2.832293] NET: Registered protocol family 10 [ 2.842792] systemd[1]: Inserted module 'ipv6' [ 2.855260] systemd[1]: Set hostname to <pi>. [ 2.906535] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:96:51:8b [ 3.016897] usb 1-1.2: new high-speed USB device number 4 using dwc_otg [ 3.099069] uart-pl011 20201000.uart: no DMA platform data [ 3.158124] usb 1-1.2: New USB device found, idVendor=0cf3, idProduct=9271 [ 3.168910] usb 1-1.2: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 3.180136] usb 1-1.2: Product: USB2.0 WLAN [ 3.187913] usb 1-1.2: Manufacturer: ATHEROS [ 3.195659] usb 1-1.2: SerialNumber: 12345 [ 3.286839] usb 1-1.3: new full-speed USB device number 5 using dwc_otg [ 3.399019] usb 1-1.3: New USB device found, idVendor=0451, idProduct=2046 [ 3.409563] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.424536] hub 1-1.3:1.0: USB hub found [ 3.433759] hub 1-1.3:1.0: 4 ports detected [ 3.726817] usb 1-1.3.2: new low-speed USB device number 6 using dwc_otg [ 3.765976] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 3.778149] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.789549] systemd[1]: Expecting device dev-ttyAMA0.device... [ 3.803472] systemd[1]: Starting Remote File Systems (Pre). [ 3.817407] systemd[1]: Reached target Remote File Systems (Pre). [ 3.827455] systemd[1]: Starting Encrypted Volumes. [ 3.839929] systemd[1]: Reached target Encrypted Volumes. [ 3.849373] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 3.867989] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.881573] systemd[1]: Starting Swap. [ 3.894044] systemd[1]: Reached target Swap. [ 3.902115] systemd[1]: Expecting device dev-mmcblk0p1.device... [ 3.916376] usb 1-1.3.2: New USB device found, idVendor=045e, idProduct=0084 [ 3.926925] usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.937798] usb 1-1.3.2: Product: Basic Optical Mouse [ 3.946069] usb 1-1.3.2: Manufacturer: Microsoft [ 3.954146] systemd[1]: Starting Root Slice. [ 3.965892] systemd[1]: Created slice Root Slice. [ 3.974185] systemd[1]: Starting User and Session Slice. [ 3.987566] systemd[1]: Created slice User and Session Slice. [ 3.998583] systemd[1]: Starting Delayed Shutdown Socket. [ 4.012605] systemd[1]: Listening on Delayed Shutdown Socket. [ 4.022075] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 4.040144] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 4.052534] input: Microsoft Basic Optical Mouse as /devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.0/0003:045E:0084.0001/input/input0 [ 4.073545] systemd[1]: Starting Journal Socket (/dev/log). [ 4.087000] hid-generic 0003:045E:0084.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-20980000.usb-1.3.2/input0 [ 4.106358] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.117047] systemd[1]: Starting udev Control Socket. [ 4.130895] systemd[1]: Listening on udev Control Socket. [ 4.140372] systemd[1]: Starting udev Kernel Socket. [ 4.153774] systemd[1]: Listening on udev Kernel Socket. [ 4.162983] systemd[1]: Starting Journal Socket. [ 4.175975] systemd[1]: Listening on Journal Socket. [ 4.184565] usb 1-1.3.3: new low-speed USB device number 7 using dwc_otg [ 4.195229] systemd[1]: Starting System Slice. [ 4.209220] systemd[1]: Created slice System Slice. [ 4.218094] systemd[1]: Starting File System Check on Root Device... [ 4.238217] systemd[1]: Starting system-systemd\x2dfsck.slice. [ 4.263320] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 4.277310] systemd[1]: Starting system-autologin.slice. [ 4.306367] systemd[1]: Created slice system-autologin.slice. [ 4.317373] systemd[1]: Starting system-serial\x2dgetty.slice. [ 4.344065] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 4.354559] usb 1-1.3.3: New USB device found, idVendor=04f3, idProduct=0103 [ 4.365351] usb 1-1.3.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.378652] systemd[1]: Starting Increase datagram queue length... [ 4.409649] systemd[1]: Starting Restore / save the current clock... [ 4.422602] input: HID 04f3:0103 as /devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3:1.0/0003:04F3:0103.0002/input/input1 [ 4.471333] systemd[1]: Starting udev Coldplug all Devices... [ 4.507257] hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 04f3:0103] on usb-20980000.usb-1.3.3/input0 [ 4.537030] input: HID 04f3:0103 as /devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3:1.1/0003:04F3:0103.0003/input/input2 [ 4.561042] systemd[1]: Mounting POSIX Message Queue File System... [ 4.627376] hid-generic 0003:04F3:0103.0003: input,hidraw2: USB HID v1.11 Device [HID 04f3:0103] on usb-20980000.usb-1.3.3/input1 [ 4.701115] systemd[1]: Mounting Debug File System... [ 4.868293] systemd[1]: Started Set Up Additional Binary Formats. [ 4.888245] systemd[1]: Mounted Huge Pages File System. [ 4.918481] systemd[1]: Starting Load Kernel Modules... [ 4.946387] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 4.989651] systemd[1]: Starting Slices. [ 5.022415] systemd[1]: Reached target Slices. [ 5.047695] fuse init (API version 7.23) [ 5.067755] systemd[1]: Mounted Debug File System. [ 5.094858] i2c /dev entries driver [ 5.115451] systemd[1]: Mounted POSIX Message Queue File System. [ 5.133746] systemd[1]: Started File System Check on Root Device. [ 5.167902] systemd[1]: Started Increase datagram queue length. [ 5.185714] systemd[1]: Started Restore / save the current clock. [ 5.227067] systemd[1]: Started Load Kernel Modules. [ 5.257010] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 5.293952] systemd[1]: Time has been changed [ 5.426655] systemd[1]: Started udev Coldplug all Devices. [ 5.660355] systemd[1]: Starting Create Static Device Nodes in /dev... [ 5.682957] systemd[1]: Mounting Configuration File System... [ 5.718691] systemd[1]: Starting Apply Kernel Variables... [ 5.746859] usb 1-1.3.4: new full-speed USB device number 8 using dwc_otg [ 5.802792] systemd[1]: Mounting FUSE Control File System... [ 5.884247] usb 1-1.3.4: not running at top speed; connect to a high speed hub [ 5.890692] systemd[1]: Starting Syslog Socket. [ 5.894870] usb 1-1.3.4: New USB device found, idVendor=125f, idProduct=312b [ 5.894905] usb 1-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.894923] usb 1-1.3.4: Product: ADATA USB Flash Drive [ 5.894937] usb 1-1.3.4: Manufacturer: ADATA [ 5.894951] usb 1-1.3.4: SerialNumber: 1108170000000440 [ 5.897921] usb-storage 1-1.3.4:1.0: USB Mass Storage device detected [ 5.907282] scsi host0: usb-storage 1-1.3.4:1.0 [ 5.918604] systemd[1]: Listening on Syslog Socket. [ 5.918917] systemd[1]: Starting Journal Service... [ 5.956207] systemd[1]: Started Journal Service. [ 6.353170] systemd-udevd[94]: starting version 215 [ 6.909682] scsi 0:0:0:0: Direct-Access ADATA USB Flash Drive 1.00 PQ: 0 ANSI: 6 [ 6.911954] sd 0:0:0:0: [sda] 15433728 512-byte logical blocks: (7.90 GB/7.35 GiB) [ 6.913063] sd 0:0:0:0: [sda] Write Protect is off [ 6.913107] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 6.914124] sd 0:0:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 6.938087] random: nonblocking pool is initialized [ 6.938248] sda: sda1 [ 6.943456] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 8.380303] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 9.468377] bcm2835-rng 20104000.rng: hwrng registered [ 10.458319] cfg80211: Calling CRDA to update world regulatory domain [ 11.879121] systemd-journald[92]: Received request to flush runtime journal from PID 1 [ 12.442767] usb 1-1.2: ath9k_htc: Firmware htc_9271.fw requested [ 12.472234] usbcore: registered new interface driver ath9k_htc [ 12.733881] usb 1-1.2: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272 [ 12.979496] ath9k_htc 1-1.2:1.0: ath9k_htc: HTC initialized with 33 credits [ 13.607271] cfg80211: Calling CRDA to update world regulatory domain [ 14.526986] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 15.205446] cfg80211: World regulatory domain updated: [ 15.205549] cfg80211: DFS Master region: unset [ 15.205569] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 15.205592] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 15.205733] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 15.205938] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 15.205964] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 15.206043] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 15.206067] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 15.206083] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 15.206099] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 15.365340] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000 [ 15.422014] ath9k_htc 1-1.2:1.0: ath9k_htc: FW Version: 1.3 [ 15.422114] ath9k_htc 1-1.2:1.0: FW RMW support: Off [ 15.422136] ath: EEPROM regdomain: 0x809c [ 15.422208] ath: EEPROM indicates we should expect a country code [ 15.422223] ath: doing EEPROM country->regdmn map search [ 15.422236] ath: country maps to regdmn code: 0x52 [ 15.422249] ath: Country alpha2 being used: CN [ 15.422314] ath: Regpair used: 0x52 [ 15.568389] ieee80211 phy0: Atheros AR9271 Rev:1 [ 15.568766] cfg80211: Calling CRDA for country: CN [ 16.022790] cfg80211: Regulatory domain changed to country: CN [ 16.022831] cfg80211: DFS Master region: FCC [ 16.022906] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 16.022936] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 16.022958] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A) [ 16.023038] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s) [ 16.023059] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) [ 16.023076] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A) [ 16.023095] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A) [ 16.023170] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A) [ 19.313847] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 23.501553] wlan0: authenticate with 94:a7:b7:39:34:2c [ 24.504850] wlan0: send auth to 94:a7:b7:39:34:2c (try 1/3) [ 24.509072] wlan0: authenticated [ 24.516855] wlan0: associate with 94:a7:b7:39:34:2c (try 1/3) [ 24.521077] wlan0: RX AssocResp from 94:a7:b7:39:34:2c (capab=0x1411 status=0 aid=2) [ 24.546097] wlan0: associated [ 24.546228] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 24.554709] cfg80211: Calling CRDA for country: GR [ 24.795663] cfg80211: Regulatory domain changed to country: GR [ 24.795738] cfg80211: DFS Master region: ETSI [ 24.795753] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 24.795775] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 24.795852] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 24.795876] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 24.795892] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s) [ 24.795912] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 24.820424] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 26.323697] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 27.757268] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 31.341453] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 32.160748] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 35.334659] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 37.426397] Adding 102396k swap on /var/swap. Priority:-1 extents:5 across:339968k SSFS [ 38.094844] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 38.097090] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 40.365616] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 43.425539] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 43.835229] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 48.443519] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 78.526163] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 99.747540] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 114.697761] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 125.757481] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 129.751188] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 134.257048] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 137.738839] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 188.326488] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 731.075090] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 735.285873] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 739.064969] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 750.634493] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 765.176069] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 765.380871] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 966.914683] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 971.627191] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2cRun:
$ sudo airmon-ng check kill
$ sudo airmon-ng start wlan0
iwconfig:
wlan0mon IEEE 802.11bgn Mode:Managed Frequency:2.457 GHz Tx-Power=20 dBm Retry short limit:7 RTS thr:off Fragment thr:off Power Management:off lo no wireless extensions. eth0 no wireless extensions.Now i managed to run, but first everything looks ok and after 30sec i am getting error 0x03.
Sending M2 message
EAP_FAILURE: TERMINATE
Sending WSC NACK
WPS Transaction failed (code: 0x03), re-trying last pin
-
Hello,
is this script working?
I install it in my Pi and it is running.
I am getting these lines in my terminal(no errors):
wlan0 scanning with wash
1 CE:81:17:56:12:10
1 AA:12:45:24:67:67
6 BB:12:12:12:12:12
change 1
down
changemac
up
reaver -i wlan0 -vv -b CE:81:17:56:12:10 -c 1
wlan0 CE:81:17:56:12:10: [+] Switching wlan0 to channel 1
change 1
down
changemac
up
reaver -i wlan0 -vv -b AA:12:45:24:67:67 -c 1
wlan0 AA:12:45:24:67:67: [+] Switching wlan0 to channel 1
waiting for device to free up... redo
change 6
down
changemac
up
reaver -i wlan0 -vv -b BB:12:12:12:12:12 -c 6
wlan0 BB:12:12:12:12:12: [+] Switching wlan0 to channel 6
wlan0 scanning with wash
..... and again the same...
In my folder there are the log files:
log_all_CE:81:17:56:12:10
log_all_AA:12:45:24:67:67
log_all_BB:12:12:12:12:12
If i open one(log_all_CE:81:17:56:12:10):
Wlan0 CE:81:17:56:12:10: [+] Switching wlan0 to channel 1
Wlan0 CE:81:17:56:12:10: [+] Switching wlan0 to channel 1
Wlan0 CE:81:17:56:12:10: [+] Switching wlan0 to channel 1
.....same line again...
Wlan0 CE:81:17:56:12:10: [+] Switching wlan0 to channel 1
Each time the script loop it adds one line more.
After 12hours and nothing has change.
Is it working correct?
Each file inside has 1200lines.
Thank you.
(how to) reaver dropbox... raspberry pi...
in Applications & Coding
Posted
- Forgot
Bully commands:
bully -b 11:22:33:44:55:66 -N -c 1 wlan0mon
Also tried with
-l70 and --f