Yvette

- Forgot Bully commands: bully -b 11:22:33:44:55:66 -N -c 1 wlan0mon Also tried with -l70 and --f

Thank you, MOde:monitor is ok now. I am using the latest version of all apps. 1)What is the best arguments for Reaver to run in modern routers? 2)I tried Bully but i was getting "WPS lockout reported, ...43 minutes". Any ideas on this one. If it was mac address the problem, then a simple script to run macchanger between each tries is a solution? The router i am testing are : New one, ZTE Speedport Entry 2i TP-Link TL-WR741ND

Hi, Sorry for the slow reply. @ZaraByte I am using TP-Link TW722N. The wireless adapter is in one corner of the room and in the other corner is the router TP-Link WR741ND. The antennas are correct. I am trying to crack wpa2 with wps on a free router that i got. I made a new sd card with a fresh Raspberry Jessie and installed everything. My card is listed in: iwconfig: wlan0 IEEE 802.11bgn ESSID:"Ecocare" Mode:Managed Frequency:2.437 GHz Access Point: 94:A7:B7:39:34:2C Bit Rate=108 Mb/s Tx-Power=20 dBm Retry short limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=30/70 Signal level=-80 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:80 Missed beacon:0 lo no wireless extensions. eth0 no wireless extensions. lsusb: Bus 001 Device 008: ID 125f:312b A-DATA Technology Co., Ltd. Superior S102 Pro Bus 001 Device 007: ID 04f3:0103 Elan Microelectronics Corp. ActiveJet K-2024 Multimedia Keyboard Bus 001 Device 006: ID 045e:0084 Microsoft Corp. Basic Optical Mouse Bus 001 Device 005: ID 0451:2046 Texas Instruments, Inc. TUSB2046 Hub Bus 001 Device 004: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub dmesg: [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.17+ (dc4@dc4-XPS13-9333) (gcc version 4.8.3 20140303 (prerelease) (crosstool-NG linaro-1.13.1+bzr2650 - Linaro GCC 2014.03) ) #838 Tue Feb 9 12:57:10 GMT 2016 [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine model: Raspberry Pi Model B Rev 2 [ 0.000000] cma: Reserved 8 MiB at 0x1b400000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 114688 [ 0.000000] free_area_init_node: node 0, pgdat c0833994, node_mem_map db010000 [ 0.000000] Normal zone: 1008 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 114688 pages, LIFO batch:31 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113680 [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1184 bcm2708_fb.fbheight=624 bcm2708.boardrev=0x100000e bcm2708.serial=0x9196518b smsc95xx.macaddr=B8:27:EB:96:51:8B bcm2708_fb.fbswap=1 bcm2708.uart_clock=3000000 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 436860K/458752K available (5771K kernel code, 488K rwdata, 1788K rodata, 348K init, 720K bss, 13700K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xdc800000 - 0xff000000 ( 552 MB) lowmem : 0xc0000000 - 0xdc000000 ( 448 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc076a0cc (7561 kB) .init : 0xc076b000 - 0xc07c2000 ( 348 kB) .data : 0xc07c2000 - 0xc083c278 ( 489 kB) .bss : 0xc083c278 - 0xc08f03e0 ( 721 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:522 [ 0.000000] clocksource stc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000013] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000052] Switching to timer-based delay loop, resolution 1000ns [ 0.000333] Console: colour dummy device 80x30 [ 0.001248] console [tty1] enabled [ 0.001302] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000) [ 0.001381] pid_max: default: 32768 minimum: 301 [ 0.001746] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001811] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.002855] Initializing cgroup subsys blkio [ 0.002943] Initializing cgroup subsys memory [ 0.003007] Initializing cgroup subsys devices [ 0.003065] Initializing cgroup subsys freezer [ 0.003121] Initializing cgroup subsys net_cls [ 0.003231] CPU: Testing write buffer coherency: ok [ 0.003343] ftrace: allocating 19733 entries in 58 pages [ 0.105682] Setting up static identity map for 0x81c0 - 0x81f8 [ 0.107800] devtmpfs: initialized [ 0.118432] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5 [ 0.118889] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.120825] pinctrl core: initialized pinctrl subsystem [ 0.121733] NET: Registered protocol family 16 [ 0.127307] DMA: preallocated 4096 KiB pool for atomic coherent allocations [ 0.128797] bcm2708.uart_clock = 3000000 [ 0.133645] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers. [ 0.133723] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.133931] Serial: AMBA PL011 UART driver [ 0.134236] 20201000.uart: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev2 [ 0.509091] console [ttyAMA0] enabled [ 0.513490] bcm2835-mbox 2000b880.mailbox: mailbox enabled [ 0.559040] bcm2708-dmaengine 20007000.dma: DMA legacy API manager at f2007000, dmachans=0xf35 [ 0.567890] bcm2708-dmaengine 20007000.dma: Initialized 7 DMA channels (+ 1 legacy) [ 0.576384] bcm2708-dmaengine 20007000.dma: Load BCM2835 DMA engine driver [ 0.583360] bcm2708-dmaengine 20007000.dma: dma_debug:0 [ 0.589467] SCSI subsystem initialized [ 0.593657] usbcore: registered new interface driver usbfs [ 0.599300] usbcore: registered new interface driver hub [ 0.604902] usbcore: registered new device driver usb [ 0.610871] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-02-01 17:51 [ 0.646678] Switched to clocksource stc [ 0.695887] FS-Cache: Loaded [ 0.699262] CacheFiles: Loaded [ 0.717458] NET: Registered protocol family 2 [ 0.723295] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.730563] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.737171] TCP: Hash tables configured (established 4096 bind 4096) [ 0.743770] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.749728] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.756394] NET: Registered protocol family 1 [ 0.761431] RPC: Registered named UNIX socket transport module. [ 0.767486] RPC: Registered udp transport module. [ 0.772219] RPC: Registered tcp transport module. [ 0.776985] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.784742] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available [ 0.793875] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.816010] VFS: Disk quotas dquot_6.6.0 [ 0.820543] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.830156] FS-Cache: Netfs 'nfs' registered for caching [ 0.836945] NFS: Registering the id_resolver key type [ 0.842161] Key type id_resolver registered [ 0.846374] Key type id_legacy registered [ 0.854143] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.862147] io scheduler noop registered [ 0.866139] io scheduler deadline registered (default) [ 0.871813] io scheduler cfq registered [ 0.878160] BCM2708FB: allocated DMA memory 5b800000 [ 0.883239] BCM2708FB: allocated DMA channel 0 @ f2007000 [ 0.899524] Console: switching to colour frame buffer device 148x39 [ 0.913655] Serial: 8250/16550 driver, 0 ports, IRQ sharing disabled [ 0.921832] vc-cma: Videocore CMA driver [ 0.925878] vc-cma: vc_cma_base = 0x00000000 [ 0.930755] vc-cma: vc_cma_size = 0x00000000 (0 MiB) [ 0.939122] vc-cma: vc_cma_initial = 0x00000000 (0 MiB) [ 0.947787] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB) [ 0.978505] brd: module loaded [ 0.993666] loop: module loaded [ 1.000998] vchiq: vchiq_init_state: slot_zero = 0xdb880000, is_master = 0 [ 1.012945] Loading iSCSI transport class v2.0-870. [ 1.022495] usbcore: registered new interface driver smsc95xx [ 1.031473] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.240508] Core Release: 2.80a [ 1.246584] Setting default values for core params [ 1.254347] Finished setting default values for core params [ 1.463218] Using Buffer DMA mode [ 1.469582] Periodic Transfer Interrupt Enhancement - disabled [ 1.478401] Multiprocessor Interrupt Enhancement - disabled [ 1.486944] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 1.494232] Dedicated Tx FIFOs mode [ 1.501109] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xdb814000 dma = 0x5b814000 len=9024 [ 1.514015] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints [ 1.542179] dwc_otg: Microframe scheduler enabled [ 1.542306] WARN::hcd_init_fiq:412: FIQ on core 0 at 0xc03d7f70 [ 1.551165] WARN::hcd_init_fiq:413: FIQ ASM at 0xc03d8248 length 36 [ 1.560230] WARN::hcd_init_fiq:438: MPHI regs_base at 0xdc896000 [ 1.569183] dwc_otg 20980000.usb: DWC OTG Controller [ 1.577116] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1 [ 1.587468] dwc_otg 20980000.usb: irq 32, io mem 0x00000000 [ 1.595988] Init: Port Power? op_state=1 [ 1.602856] Init: Power Port (0) [ 1.609334] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.619124] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.629280] usb usb1: Product: DWC OTG Controller [ 1.636934] usb usb1: Manufacturer: Linux 4.1.17+ dwc_otg_hcd [ 1.645626] usb usb1: SerialNumber: 20980000.usb [ 1.654352] hub 1-0:1.0: USB hub found [ 1.661269] hub 1-0:1.0: 1 port detected [ 1.668711] dwc_otg: FIQ enabled [ 1.668731] dwc_otg: NAK holdoff enabled [ 1.668743] dwc_otg: FIQ split-transaction FSM enabled [ 1.668797] Module dwc_common_port init [ 1.669344] usbcore: registered new interface driver usb-storage [ 1.678881] mousedev: PS/2 mouse device common for all mice [ 1.688644] bcm2835-cpufreq: min=700000 max=700000 [ 1.696869] sdhci: Secure Digital Host Controller Interface driver [ 1.705968] sdhci: Copyright(c) Pierre Ossman [ 1.713903] mmc-bcm2835 20300000.mmc: mmc_debug:0 mmc_debug2:0 [ 1.722751] mmc-bcm2835 20300000.mmc: DMA channels allocated [ 1.767307] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.776424] ledtrig-cpu: registered to indicate activity on CPUs [ 1.785769] hidraw: raw HID events driver (C) Jiri Kosina [ 1.801019] usbcore: registered new interface driver usbhid [ 1.809537] usbhid: USB HID core driver [ 1.818981] Initializing XFRM netlink socket [ 1.826167] NET: Registered protocol family 17 [ 1.833684] Key type dns_resolver registered [ 1.852296] registered taskstats version 1 [ 1.859787] vc-sm: Videocore shared memory driver [ 1.867585] Indeed it is in host mode hprt0 = 00021501 [ 1.935468] [vc_sm_connected_init]: start [ 1.943751] [vc_sm_connected_init]: end - returning 0 [ 1.954293] Waiting for root device /dev/mmcblk0p2... [ 1.967530] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.980600] mmc0: new high speed SDHC card at address b368 [ 1.989853] mmcblk0: mmc0:b368 NCard 7.48 GiB [ 1.999020] mmcblk0: p1 p2 [ 2.076805] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 2.087322] Indeed it is in host mode hprt0 = 00001101 [ 2.158145] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 2.169445] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 2.180829] devtmpfs: mounted [ 2.188034] Freeing unused kernel memory: 348K (c076b000 - c07c2000) [ 2.317238] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 2.327263] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.339212] hub 1-1:1.0: USB hub found [ 2.347332] hub 1-1:1.0: 5 ports detected [ 2.606867] random: systemd urandom read with 63 bits of entropy available [ 2.623359] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) [ 2.643219] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 2.653862] systemd[1]: Detected architecture 'arm'. [ 2.777285] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 2.787764] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.823138] smsc95xx v1.0.4 [ 2.832293] NET: Registered protocol family 10 [ 2.842792] systemd[1]: Inserted module 'ipv6' [ 2.855260] systemd[1]: Set hostname to <pi>. [ 2.906535] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:96:51:8b [ 3.016897] usb 1-1.2: new high-speed USB device number 4 using dwc_otg [ 3.099069] uart-pl011 20201000.uart: no DMA platform data [ 3.158124] usb 1-1.2: New USB device found, idVendor=0cf3, idProduct=9271 [ 3.168910] usb 1-1.2: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 3.180136] usb 1-1.2: Product: USB2.0 WLAN [ 3.187913] usb 1-1.2: Manufacturer: ATHEROS [ 3.195659] usb 1-1.2: SerialNumber: 12345 [ 3.286839] usb 1-1.3: new full-speed USB device number 5 using dwc_otg [ 3.399019] usb 1-1.3: New USB device found, idVendor=0451, idProduct=2046 [ 3.409563] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.424536] hub 1-1.3:1.0: USB hub found [ 3.433759] hub 1-1.3:1.0: 4 ports detected [ 3.726817] usb 1-1.3.2: new low-speed USB device number 6 using dwc_otg [ 3.765976] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 3.778149] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.789549] systemd[1]: Expecting device dev-ttyAMA0.device... [ 3.803472] systemd[1]: Starting Remote File Systems (Pre). [ 3.817407] systemd[1]: Reached target Remote File Systems (Pre). [ 3.827455] systemd[1]: Starting Encrypted Volumes. [ 3.839929] systemd[1]: Reached target Encrypted Volumes. [ 3.849373] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 3.867989] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.881573] systemd[1]: Starting Swap. [ 3.894044] systemd[1]: Reached target Swap. [ 3.902115] systemd[1]: Expecting device dev-mmcblk0p1.device... [ 3.916376] usb 1-1.3.2: New USB device found, idVendor=045e, idProduct=0084 [ 3.926925] usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.937798] usb 1-1.3.2: Product: Basic Optical Mouse [ 3.946069] usb 1-1.3.2: Manufacturer: Microsoft [ 3.954146] systemd[1]: Starting Root Slice. [ 3.965892] systemd[1]: Created slice Root Slice. [ 3.974185] systemd[1]: Starting User and Session Slice. [ 3.987566] systemd[1]: Created slice User and Session Slice. [ 3.998583] systemd[1]: Starting Delayed Shutdown Socket. [ 4.012605] systemd[1]: Listening on Delayed Shutdown Socket. [ 4.022075] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 4.040144] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 4.052534] input: Microsoft Basic Optical Mouse as /devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3.2/1-1.3.2:1.0/0003:045E:0084.0001/input/input0 [ 4.073545] systemd[1]: Starting Journal Socket (/dev/log). [ 4.087000] hid-generic 0003:045E:0084.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-20980000.usb-1.3.2/input0 [ 4.106358] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.117047] systemd[1]: Starting udev Control Socket. [ 4.130895] systemd[1]: Listening on udev Control Socket. [ 4.140372] systemd[1]: Starting udev Kernel Socket. [ 4.153774] systemd[1]: Listening on udev Kernel Socket. [ 4.162983] systemd[1]: Starting Journal Socket. [ 4.175975] systemd[1]: Listening on Journal Socket. [ 4.184565] usb 1-1.3.3: new low-speed USB device number 7 using dwc_otg [ 4.195229] systemd[1]: Starting System Slice. [ 4.209220] systemd[1]: Created slice System Slice. [ 4.218094] systemd[1]: Starting File System Check on Root Device... [ 4.238217] systemd[1]: Starting system-systemd\x2dfsck.slice. [ 4.263320] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 4.277310] systemd[1]: Starting system-autologin.slice. [ 4.306367] systemd[1]: Created slice system-autologin.slice. [ 4.317373] systemd[1]: Starting system-serial\x2dgetty.slice. [ 4.344065] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 4.354559] usb 1-1.3.3: New USB device found, idVendor=04f3, idProduct=0103 [ 4.365351] usb 1-1.3.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.378652] systemd[1]: Starting Increase datagram queue length... [ 4.409649] systemd[1]: Starting Restore / save the current clock... [ 4.422602] input: HID 04f3:0103 as /devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3:1.0/0003:04F3:0103.0002/input/input1 [ 4.471333] systemd[1]: Starting udev Coldplug all Devices... [ 4.507257] hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 04f3:0103] on usb-20980000.usb-1.3.3/input0 [ 4.537030] input: HID 04f3:0103 as /devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3:1.1/0003:04F3:0103.0003/input/input2 [ 4.561042] systemd[1]: Mounting POSIX Message Queue File System... [ 4.627376] hid-generic 0003:04F3:0103.0003: input,hidraw2: USB HID v1.11 Device [HID 04f3:0103] on usb-20980000.usb-1.3.3/input1 [ 4.701115] systemd[1]: Mounting Debug File System... [ 4.868293] systemd[1]: Started Set Up Additional Binary Formats. [ 4.888245] systemd[1]: Mounted Huge Pages File System. [ 4.918481] systemd[1]: Starting Load Kernel Modules... [ 4.946387] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 4.989651] systemd[1]: Starting Slices. [ 5.022415] systemd[1]: Reached target Slices. [ 5.047695] fuse init (API version 7.23) [ 5.067755] systemd[1]: Mounted Debug File System. [ 5.094858] i2c /dev entries driver [ 5.115451] systemd[1]: Mounted POSIX Message Queue File System. [ 5.133746] systemd[1]: Started File System Check on Root Device. [ 5.167902] systemd[1]: Started Increase datagram queue length. [ 5.185714] systemd[1]: Started Restore / save the current clock. [ 5.227067] systemd[1]: Started Load Kernel Modules. [ 5.257010] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 5.293952] systemd[1]: Time has been changed [ 5.426655] systemd[1]: Started udev Coldplug all Devices. [ 5.660355] systemd[1]: Starting Create Static Device Nodes in /dev... [ 5.682957] systemd[1]: Mounting Configuration File System... [ 5.718691] systemd[1]: Starting Apply Kernel Variables... [ 5.746859] usb 1-1.3.4: new full-speed USB device number 8 using dwc_otg [ 5.802792] systemd[1]: Mounting FUSE Control File System... [ 5.884247] usb 1-1.3.4: not running at top speed; connect to a high speed hub [ 5.890692] systemd[1]: Starting Syslog Socket. [ 5.894870] usb 1-1.3.4: New USB device found, idVendor=125f, idProduct=312b [ 5.894905] usb 1-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.894923] usb 1-1.3.4: Product: ADATA USB Flash Drive [ 5.894937] usb 1-1.3.4: Manufacturer: ADATA [ 5.894951] usb 1-1.3.4: SerialNumber: 1108170000000440 [ 5.897921] usb-storage 1-1.3.4:1.0: USB Mass Storage device detected [ 5.907282] scsi host0: usb-storage 1-1.3.4:1.0 [ 5.918604] systemd[1]: Listening on Syslog Socket. [ 5.918917] systemd[1]: Starting Journal Service... [ 5.956207] systemd[1]: Started Journal Service. [ 6.353170] systemd-udevd[94]: starting version 215 [ 6.909682] scsi 0:0:0:0: Direct-Access ADATA USB Flash Drive 1.00 PQ: 0 ANSI: 6 [ 6.911954] sd 0:0:0:0: [sda] 15433728 512-byte logical blocks: (7.90 GB/7.35 GiB) [ 6.913063] sd 0:0:0:0: [sda] Write Protect is off [ 6.913107] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 6.914124] sd 0:0:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 6.938087] random: nonblocking pool is initialized [ 6.938248] sda: sda1 [ 6.943456] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 8.380303] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 9.468377] bcm2835-rng 20104000.rng: hwrng registered [ 10.458319] cfg80211: Calling CRDA to update world regulatory domain [ 11.879121] systemd-journald[92]: Received request to flush runtime journal from PID 1 [ 12.442767] usb 1-1.2: ath9k_htc: Firmware htc_9271.fw requested [ 12.472234] usbcore: registered new interface driver ath9k_htc [ 12.733881] usb 1-1.2: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272 [ 12.979496] ath9k_htc 1-1.2:1.0: ath9k_htc: HTC initialized with 33 credits [ 13.607271] cfg80211: Calling CRDA to update world regulatory domain [ 14.526986] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 15.205446] cfg80211: World regulatory domain updated: [ 15.205549] cfg80211: DFS Master region: unset [ 15.205569] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 15.205592] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 15.205733] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 15.205938] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 15.205964] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 15.206043] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 15.206067] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 15.206083] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 15.206099] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 15.365340] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000 [ 15.422014] ath9k_htc 1-1.2:1.0: ath9k_htc: FW Version: 1.3 [ 15.422114] ath9k_htc 1-1.2:1.0: FW RMW support: Off [ 15.422136] ath: EEPROM regdomain: 0x809c [ 15.422208] ath: EEPROM indicates we should expect a country code [ 15.422223] ath: doing EEPROM country->regdmn map search [ 15.422236] ath: country maps to regdmn code: 0x52 [ 15.422249] ath: Country alpha2 being used: CN [ 15.422314] ath: Regpair used: 0x52 [ 15.568389] ieee80211 phy0: Atheros AR9271 Rev:1 [ 15.568766] cfg80211: Calling CRDA for country: CN [ 16.022790] cfg80211: Regulatory domain changed to country: CN [ 16.022831] cfg80211: DFS Master region: FCC [ 16.022906] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 16.022936] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 16.022958] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A) [ 16.023038] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s) [ 16.023059] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) [ 16.023076] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A) [ 16.023095] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A) [ 16.023170] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A) [ 19.313847] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 23.501553] wlan0: authenticate with 94:a7:b7:39:34:2c [ 24.504850] wlan0: send auth to 94:a7:b7:39:34:2c (try 1/3) [ 24.509072] wlan0: authenticated [ 24.516855] wlan0: associate with 94:a7:b7:39:34:2c (try 1/3) [ 24.521077] wlan0: RX AssocResp from 94:a7:b7:39:34:2c (capab=0x1411 status=0 aid=2) [ 24.546097] wlan0: associated [ 24.546228] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 24.554709] cfg80211: Calling CRDA for country: GR [ 24.795663] cfg80211: Regulatory domain changed to country: GR [ 24.795738] cfg80211: DFS Master region: ETSI [ 24.795753] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 24.795775] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 24.795852] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 24.795876] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 24.795892] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s) [ 24.795912] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 24.820424] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 26.323697] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 27.757268] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 31.341453] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 32.160748] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 35.334659] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 37.426397] Adding 102396k swap on /var/swap. Priority:-1 extents:5 across:339968k SSFS [ 38.094844] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 38.097090] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 40.365616] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 43.425539] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 43.835229] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 48.443519] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 78.526163] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 99.747540] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 114.697761] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 125.757481] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 129.751188] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 134.257048] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 137.738839] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 188.326488] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 731.075090] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 735.285873] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 739.064969] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 750.634493] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 765.176069] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 765.380871] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 966.914683] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c [ 971.627191] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 94:a7:b7:39:34:2c Run: $ sudo airmon-ng check kill $ sudo airmon-ng start wlan0 iwconfig: wlan0mon IEEE 802.11bgn Mode:Managed Frequency:2.457 GHz Tx-Power=20 dBm Retry short limit:7 RTS thr:off Fragment thr:off Power Management:off lo no wireless extensions. eth0 no wireless extensions. Now i managed to run, but first everything looks ok and after 30sec i am getting error 0x03. Sending M2 message EAP_FAILURE: TERMINATE Sending WSC NACK WPS Transaction failed (code: 0x03), re-trying last pin

Hello, is this script working? I install it in my Pi and it is running. I am getting these lines in my terminal(no errors): wlan0 scanning with wash 1 CE:81:17:56:12:10 1 AA:12:45:24:67:67 6 BB:12:12:12:12:12 change 1 down changemac up reaver -i wlan0 -vv -b CE:81:17:56:12:10 -c 1 wlan0 CE:81:17:56:12:10: [+] Switching wlan0 to channel 1 change 1 down changemac up reaver -i wlan0 -vv -b AA:12:45:24:67:67 -c 1 wlan0 AA:12:45:24:67:67: [+] Switching wlan0 to channel 1 waiting for device to free up... redo change 6 down changemac up reaver -i wlan0 -vv -b BB:12:12:12:12:12 -c 6 wlan0 BB:12:12:12:12:12: [+] Switching wlan0 to channel 6 wlan0 scanning with wash ..... and again the same... In my folder there are the log files: log_all_CE:81:17:56:12:10 log_all_AA:12:45:24:67:67 log_all_BB:12:12:12:12:12 If i open one(log_all_CE:81:17:56:12:10): Wlan0 CE:81:17:56:12:10: [+] Switching wlan0 to channel 1 Wlan0 CE:81:17:56:12:10: [+] Switching wlan0 to channel 1 Wlan0 CE:81:17:56:12:10: [+] Switching wlan0 to channel 1 .....same line again... Wlan0 CE:81:17:56:12:10: [+] Switching wlan0 to channel 1 Each time the script loop it adds one line more. After 12hours and nothing has change. Is it working correct? Each file inside has 1200lines. Thank you.