[Couple of issues]

After getting a replacement pineapple nano from hak5 my problem was solved. I have tested both nanos (old an new replacement) after setting them to factory defaults and using firmware 1.0.6: the old one does only recover 2 SSIDs an many "out of range", the new one recovers more themn 8 SSIDs and works great.

[Couple of issues]

Back at home I connected the WP nano to my Kali Linux netbook using the wp6.sh script. After that I can capture SSIDs in recon mode and in pineAP again. So the problem not capturing SSIDs seems to be after factory reset and first startup and setup using usb tethring on android phone. Tommorow I will check again using usb thethering and wifi tethring on wlan2 (Ralink rt5370).

[Couple of issues]

This might be a power issue? If possible, post the content of /etc/config/wireless in spoiler tags.

I'm using the Y usb cable when using the nano with notebook or netbook and the Pineapple Juice 4000 to go. In every case somtimes the blue LED turn off after start up (webinterface still working over usb/wifi tethering on wlan2).

Here is my /etc/config/wireless:

root@Pineapple:~# cat /etc/config/wireless

config wifi-device 'radio0'

option type 'mac80211'

option channel '11'

option hwmode '11g'

option path 'platform/ar933x_wmac'

option htmode 'HT20'

config wifi-iface

option device 'radio0'

option network 'lan'

option mode 'ap'

option ssid 'Pineapple_9180'

option encryption 'none'

option hidden '1'

config wifi-iface

option device 'radio0'

option network 'lan'

option mode 'ap'

option ssid 'Management'

option encryption 'psk2+ccmp'

option key 'pineapplesareyummy'

option disabled '1'

config wifi-device 'radio1'

option type 'mac80211'

option channel '11'

option hwmode '11g'

option path 'platform/ehci-platform/usb1/1-1/1-1.1/1-1.1:1.0'

option htmode 'HT20'

config wifi-iface

option device 'radio1'

option ifname 'wlan1'

option network 'lan'

option mode 'sta'

option ssid 'Pineapple_C000'

option encryption 'none'

root@Pineapple:~#

[Couple of issues]

I am also experiencing this problem since updating to 1.0.5, tried going back to 1.0.4 but still cant scan properly or capture SSIDs... did you ever find a resolution?

Hello,

after having problems with blue led (sometimes after startup procedure with blinking blue led the led goes off) I set my nano (FW 1.0.5) to factory defaults by web interface. Now my nano can't capture any SSIDs in recon mode and sometimes after starup procedure the blue led turn off.

[Auto ssh -- connection refused]

I also get connection refused when i reboot my system sometimes.

Then i ssh in the vps and type reboot [enter] and im able to connect again.

Same problem here. After restarting autossh on turtle connection from vps ist possible, but in the wild I´m not able to restart autossh on turle ;-)