fredoldodo

Maybe with /etc/config/dhcp ?

Hey, Thank you for your reply. Here is my /etc/config/wireless, but I can't get eth0 and eth1 simultaneously working: config interface 'loopback' option ifname 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config interface 'lan' option ifname 'eth0' option type 'bridge' option proto 'static' option ipaddr '172.16.42.1' option netmask '255.255.255.0' option gateway '172.16.42.42' option dns '8.8.8.8' config interface 'lan2' option ifname 'eth1' option type 'bridge' option proto 'static' option ipaddr '172.16.42.1' option netmask '255.255.255.0' option gateway '172.16.42.42' option dns '8.8.8.8' config interface 'wan' option proto 'dhcp' config interface 'usb' option ifname 'usb0' option proto 'dhcp' config interface 'wan2' option ifname 'ppp0' option proto '3g' option service 'cdma' option device '/dev/ttyUSB0' option apn 'pinternet.interkom.de' option username ' ' option password ' ' option defaultroute '1' option ppp_redial 'persist' option peerdns '1' option dns ' ' option keepalive '1' option pppd_options ' '

Hello, I'm trying to use my USB to RJ45 adapter on the USB port of the pineapple but I'am unable to get an IP address with my PC when i connect to it. Is there a DHCP server to activate (on eth1) ? (I'm using eth0 to connect to a raspberry pi) here is a "ifconfig eth1": eth1 Link encap:Ethernet HWaddr 9C:EB:E8:0D:88:72 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Or perhaps something other to do ? How can I get it working ? Thanks for your help, Frédéric.

{UP} Nobody knows ?

{ It's very difficult to express myself in English, I hope you will be able to understand me } (and if someone speaks French or German, it would be great ! ) I would like to create a WPA2 encrypted rogue AP with WPS (PBC) so that everyone who's trying to connect to it, does not need to type the right WPA passphrase on his computer. I already did it on my Kali Linux machine and it worked fine but I don't know how to activate the WPS (PBC) on an AP on my Wifi Pineapple MKV . Can someone help me ? Best regards, Fred.

Okay. So it was a sad death for this little machine. I will need to buy another one :( Anyway, thank you very much :)

Thank you :) Yes I meaned "Power Supply" with "Alimentation" (it's really difficult for me to express myself in english, I'm only fourteen. ) I was able to use the Pineapple, yes, but only with this DC barrel cable: This is my brand new car battery, 12 Volts - 7 A/hour with an USB cable mounted on it: It broke down when I tried to supply the pineapple like this: Thank you very very much for your help, Fred

I supplied my Wifi pineapple with a 12V alimentation with the USB powered Hub. ( http://hakshop.myshopify.com/collections/accessory/products/usb-powered-hub ) The Pineapple burned out !!! What can I do ? :( I want my money back !!! Is there somewhere a fuse ? It worked fine with the DC connector :( It's very embarrassing because I got the Pineapple some days ago ! Please help me ! I'm desperated ! Thanx, Fred

hello, I would like to use a VPN on my Wifi Pineapple MK5. I have no idea how to do it. I already tried with 'PON $tunnel' in the terminal but... Thank you for your help, Fred