[Getting tcp dump to output to /sd]

http://www.tcpdump.org/tcpdump_man.html

thank you VERY much.

So I have another quick q..

I want to set dip switches so that i get on boot, the following sequence:

Starts wlan1

Starts wlan0

Bridges them as can be done in wi-fi manager

Thats config 1.

Now the next one question is more straight fwd - i see the wp5.sh script is just using a load of variables to put into some commands to do the config.

How best could I cut that down to a script that only ever asked me for internet default gateway, since if i was in connecting to public wi-fi on my mac, this would be the only variable that ever changed, the rest always stays constant.

thanks in advance - i am a bit of n00b as u can tell.

[Getting tcp dump to output to /sd]

Hey there folks..

Just got the pineapple fired up and capturing using a honeypot...

Any ideas how i write the output of tcpdump to the mounted SD card in the unit?

[Newbie Question - TCPDUMP - which adapter to monitor ?]

Please excuse my ignorance, if I have WLAN0 acting as the honeypot, WLAN1 is in client mode connected to the actual WIFI access point which port do I monitor with TCPDUMP, eg, l0, wlan1, wlan0, eth0 or br-lan

(no ethernet cable connected to Pineapple)

Thanks in advance people.

Depends how you do it - I used wi-fi manager infusion to bridge wlan1 and wlan0, wlan1 being in client mode and wlan0 being the AP.

I initially ran a tcp-dump on br-lan and yes i got the data.

I then ran it on wlan1 and also got what i wanted.

I couldn't run it on wlan0 because it complained of "no interface"