Hello all,
I recieved my MkIV in the mail yesterday and I've been tinkering with getting it set up, but I'm having problems getting it to recognize any USB devices (light doesn't come on, devices don't show up in web portal, etc), and I'm concerned that it may be a hardware issue? Here's a summary of where I'm at and how I've tried to diagnose the problem:
Firmware: 2.8.1 (flashed twice, no devices plugged in; able to access web portal and SSH, ICS enabled and confirmed working)
Power: From the wall through the stock brick
Devices tried:
PNY 16GB drive
PNY 32 GB drive
SanDisk 4 GB Cruzer Fit
(All three have been formatted according to http://forums.hak5.org/index.php?/topic/25882-how-to-enable-usb-mass-storage-with-swap-partition/ and have been tested successfully on two other systems)
Alfa NHA card (also verified working)
lsusb Output:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
mount Output:
rootfs on / type rootfs (rw)
/dev/root on /rm type squashfs (ro,relatime)
proc on /proc type proc (rw,noatime)
sysfs on /sys type sysfs (rw,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime,size=14672k)
tmpfs on /dev type tmpfs (rw,noatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,noatime,mode=600)
/dev/mtdblock3 on /overlay type jffs2 (rw,noatime)
overlayfs:/overlay on / type overlayfs (rw,relatime,lowerdir= ,upperdir=/overlay)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
none on /proc/bus/usb type usbfs (rw,relatime)
And
ls /dev/sd*
Returns 'No such file or directory'
As I said, none of the devices get any response from the Pineapple from what I can tell. I'm hoping that maybe it's a configuration issue? I'm not experienced enough with Linux to know where to look or what to try to verify that USB services are enabled and running, my Google-fu isn't turning anything up, and I've run out of ideas as to how to diagnose the issue with hardware alone. I'd really like to get some Infusions running and start actually experimenting with the device, so any thoughts or suggestions would be welcome.
Here's the dmesg output:
@qualcomm.com>
And the fstab settings:
If there's any other info I can provide, let me know.
Thanks in advance
