Jump to content

Jashmane

Active Members
 View Profile  See their activity

  • Posts

    11

  • Joined

  • Last visited

 Content Type 

Posts posted by Jashmane

    Problem with flashing over Serial

    in WiFi Pineapple Mark IV

    Posted

    So.. if your bootloader tries to get it at 192.168.2.100 have you tried setting your IP to that instead of .11?

    I mean sure, you can change it to listen to 192.168.2.11 but I see no reason to. Just set your IP to .100.

    I'll try to set it to 192.168.2.11. But yea iv'e already tried to set it to .100 but i'm geting the same error

    Problem with flashing over Serial

    in WiFi Pineapple Mark IV

    Posted

    Read the wiki again to make sure everything is correctly setup, and in the tftpd program, you can select what IP to use from the dropdown... I recommend following the video on the wiki if your new to flashing, it makes it easier to understand a lil'

    -Foxtrot

    Yes i have watched it many time's and i'm still getting stuck at the part of putty not connecting to the Tftpd server

    Problem with flashing over Serial

    in WiFi Pineapple Mark IV

    Posted

    Problem with flashing over Serial PLZ HELP

    Iv'e done every step by step to do a clean flash over TTL UART OVER SERIAL because iv'e bricked it.
    Iv'e set the local area connection to iP 192.168.2.11 for the pinapple Iv'e set the same IP on Tftpd server.
    Iv'e set up putty right, serial line COM3 speed 115200, even in the serial tab flow control none.
    but putty is where i'm having a problem. once i open it i choosed 1, then i open Trtpd64 server
    I set my server interface to 192.168.2.11 change my dir to the factory files

    i run in putty

    "setenv bootargs "board=ALFA console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd"
    "saveenv"
    "tftp 0x80600000 kernel.bin" < this is where i get stuck!

    putty say's

    ar7240> tftp 0x80600000 kernel.bin
eth0 link down
FAIL
dup 1 speed 1000
Using eth1 device
TFTP from server "192.168.2.100";<(problem it should be 192.168.2.11) our IP address is 192.168.2.1
Filename 'kernel.bin'.
Load address: 0x80600000
Loading: T T T T T T T T T T
Retry count exceeded; starting again
eth0 link down
FAIL

    I can't get Putty to use the 192.168.2.11 it try's to connect to 192.168.2.100. on Putty
    Iv'e tried everything i can think of

    PLZ HELP THNKS ALOT (I miss playing around with my Wifi pineapple I was learning alot)

    I have set everything up right put for some reason putty will not connect to the Tftpd64 server,

    Iv'e ever tried to set the pineapple to the ip that putty's trying to connect to " 192.168.2.100" still no luck, it just wont connect to the server.

    IF ANYBODY HAS A IDEA HOW TO HELP ME FLASH MY PINEAPPLE OVER Serial IT WOULD MEAN ALOT TO ME THNKS

    post-42627-0-12424600-1363114951_thumb.p

    [Release][Stable] 2.8.0 Firmware

    in WiFi Pineapple Mark IV

    Posted

    problem's with flashing over TTL UART OVER SERIAL

    Iv'e done every step by step to do a clean flash over TTL UART OVER SERIAL because iv'e bricked it.
    Iv'e set the local area connection to iP 192.168.2.11 for the pinapple Iv'e set the same IP on Tftpd server.
    Iv'e set up putty right, serial line COM3 speed 115200, even in the serial tab flow control none.
    but putty is where i'm having a problem. once i open it i choosed 1, then i open Trtpd64 server
    I set my server interface to 192.168.2.11 change my dir to the factory files
    i run in putty "setenv bootargs "board=ALFA console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd"
    "saveenv"
    "tftp 0x80600000 kernel.bin" < this is where i get stuck!
    putty say's
    ar7240> tftp 0x80600000 kernel.bin
    eth0 link down
    FAIL
    dup 1 speed 1000
    Using eth1 device
    TFTP from server "192.168.2.100";<(problem it should be 192.168.2.11) our IP address is 192.168.2.1
    Filename 'kernel.bin'.
    Load address: 0x80600000
    Loading: T T T T T T T T T T
    Retry count exceeded; starting again
    eth0 link down
    FAIL
    I can't get Putty to use the 192.168.2.11 it try's to connect to 192.168.2.100. on Putty
    Iv'e tried everything i can think of
    PLZ HELP THNKS ALOT (I miss playing around with my Wifi pineapple I was learning alot)
×
×
  • Create New...