[Urgent - Need help with failed update]

Thanks for hooking me up Darren!

[Urgent - Need help with failed update]

Foxtrot, yes, was a bad choice. Thanks for kicking a guy when hes down.

[Urgent - Need help with failed update]

I forgot to include the default questions. So here ya go

Pineapple Hardware Version: Mark IV

Pineapple Software Version: 2.7.7

OS used to connect to the pineapple: Windows7

Network layout of how your setup is connected (including IP information): Windows ETH LAN is set to 172.16.42.42 and plugged into PoE LAN

Ping results from computer to pineapple: Failed

Is the problem repeatable (Yes/No): Yes

Steps taken which created the problem:

Was running 2.7.0 Decided to upgrade to latest dev build 2.7.7

I SCP'd the upgrade.bin to /tmp/

sysupgrade -n -v /tmp/upgrade.bin

Error Messages: None

Log file information: Not available

Anything else that was attempted to 'fix' the problem:

Unplugged, tried reset button for 7-10 seconds, tried different cables

[Urgent - Need help with failed update]

Today while preparing for a presentation I'd doing about the Pineapple for B-Sides SF, I decided to upgrade to latest dev version Version: 2.7.7

Since then my pineapple is not working. I have been playing around for awhile with no luck.

Here is what I did and what little debugging data I have been able to gather

I tried thru the web interface and it said the md5 didnt match, so I just scp'd the file to /tmp and executed sysupgrade

root@Pineapple:~# sysupgrade -n -v /tmp/upgrade.bin
Sending TERM to remaining processes ... netifd udhcpc atd crond uhttpd uhttpd dnsmasq ntpd syslogd klogd hotplug2 ubusd
Sending KILL to remaining processes ... uhttpd uhttpd ntpd
Switching to ramdisk...
Performing system upgrade...
Unlocking firmware ...


Writing from <stdin> to firmware ...
Upgrade completed
Rebooting system... 

Since then it wont work. When I power it,

Without ethernet: PWR goes on, the LAN blinks, WAN blinks, then LAN stays half-lit

Eth into PoE LAN: PWR goes on, the LAN blinks, WAN blinks, then LAN blinks a few times, then goes to half-lit

Eth into WAN/LAN: PWR goes on, the LAN blinks, WAN blinks a few times, then LAN goes to half-lit

WiFi never comes on. And it never replies to any pings. It seems dead.

The next step I am planning is to run to Fry's and pickup something like this

http://store.jpgottech.com/shop/usb-uart-console-adapter-v2/

This would allow me to crack it open and try the Clean Flash (Serial) instructions. I hope.

I need to get this fixed for my talk on Monday or get a new device by Monday morning. HELP!