firewall1
-
Posts
11 -
Joined
-
Last visited
-
Days Won
1
Posts posted by firewall1
-
-
did you test with another power supply ? (i mean adapter plug in wall outlet).
is your hub external supplied or not ?
WBR
-
Hello Boba Fett.
What do you use as power supply ?
-
Hello there.
So i found a acceptable solution.
It look like the Fstab mount the Sd card and the 3G script is disturbed by the Fstab ....
What i do is :
disable the option enable in the fs tab :
option enabled 0
Both for sda1 and sda2
now i put this in WPS button script :
mount /dev/sda /usb mount /dev/sda1 /usb
Now after booting, i wait untill del stop blinking.
I push the button ( i push two times because maybe i should put some tempo...)
Now i look in my ressources and my Sd card is mounted on /usb.
Everything works fine after that .
But i can not enjoy Autostart from SSLstrip...
Maybe a master can found another, better issue to this problem.
Best Regards
Firewall1
-
I try both with 2.7.7 and 2.8.0 and i have same problem.
But like you if i "mount /dev/sda /usb" it mount the card (with error message).
-
@Boba Fett
Thank you for your help.
Yes this is what i was thinking but i try without mount 3G on boot and the problem is exactly the same.
Any other ideas?
Did someone already mount µSD inside 3G modem ?
Did someone use USB Hub ?
Firewall1
-
Thank you for your answer.
I try with your FStab and it is the same.
Mount for few seconds and then disepear.
I think maybe a problem when mounting the 3G connection.
Any other ideas ?
thanks in advance
Firewall1
-
I spend my day on this problem so with the result maybe some master can help me :
1) factory reset => paste 3G script : can see swap mounted and sda1 mounted for few second after reboot.... after few second, sda1 diseapear.
2) format scard for remove swap. make 3.9Gb partition => factory reset : sda1 mounted for few second after reboot.... after few second, sda1 diseapear.
can thishelp people forhelp me ?
Thanks
Firewall1
-
Hi to all.
i want to use my USB 3G modem on pineapple MK4 box.
i succeeded to use the modem by this script :
*12d1:1506*) echo "Huawei E303F detected. Attempting mode switch" uci delete network.wan2 uci set network.wan2=interface uci set network.wan2.ifname=ppp0 uci set network.wan2.proto=3g uci set network.wan2.service=umts uci set network.wan2.device=/dev/ttyUSB0 uci set network.wan2.apn=myapnname uci set network.wan2.username=myusernameoperator uci set network.wan2.password=mypasswordoperator uci set network.wan2.defaultroute=1 uci commit network usb_modeswitch -v 12d1 -p 1506 sleep 10; rmmod usbserial sleep 3; insmod usbserial vendor=0x12d1 product=0x1506 sleep 5; /etc/init.d/firewall disable; /etc/init.d/firewall stop logger "3G: firewall stopped" iptables -t nat -A POSTROUTING -s 172.16.42.0/24 -o 3g-wan2 -j MASQUERADE iptables -A FORWARD -s 172.16.42.0/24 -o 3g-wan2 -j ACCEPT iptables -A FORWARD -d 172.16.42.0/24 -m state --state ESTABLISHED,RELATED -i 3g-wan2 -j ACCEPT ;;
Ok now i would like to mount the 4Gb µSD that i have inside this key.
So my card is Ext4 formatted with 1Gb for Swap (Ext4) and a 3Gb for data (Ext4) (i follow instructions i found in forum).
Now is the problem:
1) in /dev , the name of Sdcard is sdb.
so i modify the fstab with the following options :
config global automount option from_fstab 1 option anon_mount 1 config global autoswap option from_fstab 1 option anon_swap 0 config mount option target /usb option device /dev/sdb option fstype ext4 option options rw,sync option enabled 1 option enabled_fsck 0 config swap option device /dev/sda2 option enabled 0
if i do that, i can see my 3Gb partion on ressources
/dev/sda1 2.9G 68.4M 2.7G 2% /mnt/sda1
But at this step i can not use USB storage (look like not found by pineapple).
if i check in /mnt at this step i have
sda1 and sda2 present.
now i try to mount swap on sda2, so i change config swap to:
config swap option device /dev/sda2 option enabled 1
i update FStab and i "mkswap /dev/sda2"
i reboot
now i can see my swap :
Swap: 787180 76 787104
but i can not see my 3Gb partition.
Can somebody help me with this pb please ?
Thanks in advance
Firewall1
-
Thank you for your reply , the issue of all my problems was the browser ( ie is big s..t)
I install chrome and all work perfectly now. Have a good day :D
-
I just aquire my pineapple mk4 is was on firmware 2.4.1 then i update the box 2.7.0 correctly. But i have some trouble like when i try to mount the monitor ,.enable or disable wlan0 with reaver that not work i cannot scan any ap. In command line reaver works perferctly. I try to reinstall firmware manually , i try to downgrade upgrade again . Same problem
Any comments will be welcome. Thank to all for your help.
May be my hardware have some trouble i don t know.
Downgrade 3.0 to 2.81
in WiFi Pineapple Mark IV
Posted
For downgrade firmware 3.0 to 2.81
That s work 100% but please wait don t try to do anything before reboot.