/etc/config/wireless
root@Pineapple:~# cat /etc/config/wireless
config wifi-device 'radio0'
option type 'mac80211'
option hwmode '11g'
option path 'platform/ar934x_wmac'
option htmode 'HT20'
option channel '1'
config wifi-iface
option device 'radio0'
option network 'lan'
option mode 'ap'
option ssid 'Pineapple_8C33'
option encryption 'none'
config wifi-iface
option device 'radio0'
option network 'lan'
option mode 'ap'
option encryption 'psk2+ccmp'
option key 'password'
option ssid 'hacked'
config wifi-device 'radio1'
option type 'mac80211'
option channel '11'
option hwmode '11g'
option path 'pci0000:00/0000:00:00.0'
option htmode 'HT20'
config wifi-iface
option device 'radio1'
option ifname 'wlan1'
option mode 'sta'
option ssid 'ap1-2.4ghz'
option encryption 'mixed-psk+ccmp+tkip'
option key 'cRoa7#?E'
option network 'wwan'
config wifi-device 'radio2'
option type 'mac80211'
option channel '11'
option hwmode '11g'
option path 'platform/ehci-platform/usb1/1-1/1-1:1.0'
option htmode 'HT20'
config wifi-iface
option device 'radio2'
option ifname 'wlan2'
option mode 'sta'
option macaddr '88:9f:fa:8d:b9:67'
option network 'wwan'
option ssid 'RenderLab-Free'
option encryption 'none'
And here is dmesg:
root@Pineapple:~# dmesg
[ 0.000000] Linux version 3.18.23 (sebkinne@Worker) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r48411) ) #22 Mon Feb 15 19:45:32 PST 2016
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
[ 0.000000] SoC: Atheros AR9344 rev 2
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 08000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x07ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x07ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff]
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat 803880f0, node_mem_map 81000000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: board=TETRA console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env),256k(caldata),-(mb0);ar934x-nfc:2048k(kernel),-(ubi) rootfstype=squashfs noinitrd
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 125796K/131072K available (2642K kernel code, 125K rwdata, 556K rodata, 188K init, 186K bss, 5276K reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Clocks: CPU:560.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:40.000MHz
[ 0.000000] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
[ 0.070000] pid_max: default: 32768 minimum: 301
[ 0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.080000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.080000] NET: Registered protocol family 16
[ 0.090000] MIPS: machine is tetra
[ 0.090000] ar71xx: using random MAC address for eth0
[ 0.310000] ar71xx: using random MAC address for eth1
[ 0.530000] registering PCI controller with io_map_base unset
[ 0.540000] PCI host bridge to bus 0000:00
[ 0.540000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
[ 0.550000] pci_bus 0000:00: root bus resource [io 0x0000]
[ 0.550000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.560000] pci 0000:00:00.0: [168c:abcd] type 00 class 0x020000
[ 0.560000] pci 0000:00:00.0: invalid calibration data
[ 0.560000] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit]
[ 0.560000] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.560000] pci 0000:00:00.0: supports D1
[ 0.560000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.560000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.560000] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
[ 0.570000] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
[ 0.570000] pci 0000:00:00.0: using irq 40 for pin 1
[ 0.580000] Switched to clocksource MIPS
[ 0.580000] NET: Registered protocol family 2
[ 0.590000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.590000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.600000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.600000] TCP: reno registered
[ 0.610000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.610000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.620000] NET: Registered protocol family 1
[ 0.620000] PCI: CLS 0 bytes, default 32
[ 0.620000] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.650000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.650000] msgmni has been set to 245
[ 0.660000] io scheduler noop registered
[ 0.660000] io scheduler deadline registered (default)
[ 0.660000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.670000] console [ttyS0] disabled
[ 0.690000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 2500000) is a 16550A
[ 0.700000] console [ttyS0] enabled
[ 0.710000] bootconsole [early0] disabled
[ 0.730000] m25p80 spi0.0: found s25fl008k, expected m25p80
[ 0.730000] m25p80 spi0.0: s25fl008k (1024 Kbytes)
[ 0.740000] 4 cmdlinepart partitions found on MTD device spi0.0
[ 0.740000] Creating 4 MTD partitions on "spi0.0":
[ 0.750000] 0x000000000000-0x000000040000 : "u-boot"
[ 0.750000] 0x000000040000-0x000000080000 : "u-boot-env"
[ 0.760000] 0x000000080000-0x0000000c0000 : "caldata"
[ 0.770000] 0x0000000c0000-0x000000100000 : "mb0"
[ 0.770000] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
[ 0.780000] nand: Micron MT29F16G08ABABAWP 2GiB 3.3V 8-bit
[ 0.790000] nand: 2048MiB, SLC, page size: 4096, OOB size: 224
[ 0.790000] Scanning device for bad blocks
[ 1.070000] random: nonblocking pool is initialized
[ 1.080000] 2 cmdlinepart partitions found on MTD device ar934x-nfc
[ 1.080000] Creating 2 MTD partitions on "ar934x-nfc":
[ 1.090000] 0x000000000000-0x000000200000 : "kernel"
[ 1.090000] 0x000000200000-0x000080000000 : "ubi"
[ 1.110000] libphy: ag71xx_mdio: probed
[ 1.700000] ag71xx-mdio.1: Found an AR934X built-in switch
[ 1.740000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[ 2.340000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd042, driver=Generic PHY]
[ 2.350000] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[ 2.350000] TCP: cubic registered
[ 2.360000] NET: Registered protocol family 17
[ 2.360000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 2.380000] 8021q: 802.1Q VLAN Support v1.8
[ 2.380000] UBI: auto-attach mtd5
[ 2.390000] UBI: attaching mtd5 to ubi0
[ 14.940000] UBI: scanning is finished
[ 14.970000] UBI: attached mtd5 (name "ubi", size 2046 MiB) to ubi0
[ 14.970000] UBI: PEB size: 524288 bytes (512 KiB), LEB size: 516096 bytes
[ 14.980000] UBI: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
[ 14.990000] UBI: VID header offset: 4096 (aligned 4096), data offset: 8192
[ 14.990000] UBI: good PEBs: 4092, bad PEBs: 0, corrupted PEBs: 0
[ 15.000000] UBI: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 15.010000] UBI: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 858528783
[ 15.010000] UBI: available PEBs: 0, total reserved PEBs: 4092, PEBs reserved for bad PEB handling: 80
[ 15.020000] UBI: background thread "ubi_bgt0d" started, PID 236
[ 15.030000] UBI: ubiblock0_0 created from ubi0:0(rootfs)
[ 15.040000] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 15.050000] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 15.060000] Freeing unused kernel memory: 188K (803a1000 - 803d0000)
[ 16.610000] init: Console is alive
[ 16.610000] init: - watchdog -
[ 18.530000] usbcore: registered new interface driver usbfs
[ 18.540000] usbcore: registered new interface driver hub
[ 18.540000] usbcore: registered new device driver usb
[ 18.590000] SCSI subsystem initialized
[ 18.600000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 18.610000] ehci-platform: EHCI generic platform driver
[ 18.610000] ehci-platform ehci-platform: EHCI Host Controller
[ 18.620000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 18.630000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 18.660000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 18.660000] hub 1-0:1.0: USB hub found
[ 18.670000] hub 1-0:1.0: 1 port detected
[ 18.670000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 18.680000] ohci-platform: OHCI generic platform driver
[ 18.690000] uhci_hcd: USB Universal Host Controller Interface driver
[ 18.700000] usbcore: registered new interface driver usb-storage
[ 18.730000] init: - preinit -
[ 21.660000] eth0: link up (1000Mbps/Full duplex)
[ 23.330000] mount_root: loading kmods from internal overlay
[ 23.730000] UBIFS: background thread "ubifs_bgt0_1" started, PID 348
[ 24.060000] UBIFS: recovery needed
[ 24.860000] UBIFS: recovery completed
[ 24.860000] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 24.870000] UBIFS: LEB size: 516096 bytes (504 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
[ 24.880000] UBIFS: FS size: 2049417216 bytes (1954 MiB, 3971 LEBs), journal size 33546240 bytes (31 MiB, 65 LEBs)
[ 24.890000] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
[ 24.890000] UBIFS: media format: w4/r0 (latest is w4/r0), UUID CACB1913-CCE8-4E47-9995-DC9CA35A67BD, small LPT model
[ 24.910000] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 24.940000] block: extroot: not configured
[ 24.940000] UBIFS: un-mount UBI device 0, volume 1
[ 24.950000] UBIFS: background thread "ubifs_bgt0_1" stops
[ 24.960000] UBIFS: background thread "ubifs_bgt0_1" started, PID 351
[ 25.840000] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 25.850000] UBIFS: LEB size: 516096 bytes (504 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
[ 25.860000] UBIFS: FS size: 2049417216 bytes (1954 MiB, 3971 LEBs), journal size 33546240 bytes (31 MiB, 65 LEBs)
[ 25.870000] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
[ 25.880000] UBIFS: media format: w4/r0 (latest is w4/r0), UUID CACB1913-CCE8-4E47-9995-DC9CA35A67BD, small LPT model
[ 25.900000] mount_root: loading kmods from internal overlay
[ 26.170000] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 26.190000] block: extroot: not configured
[ 26.200000] mount_root: switching to jffs2 overlay
[ 26.270000] eth0: link down
[ 26.290000] procd: - early -
[ 26.290000] procd: - watchdog -
[ 27.400000] procd: - ubus -
[ 28.410000] procd: - init -
[ 30.190000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
[ 30.200000] Backport generated by backports.git backports-20150129-0-gdd4a670
[ 30.230000] cfg80211: Calling CRDA to update world regulatory domain
[ 30.230000] cfg80211: World regulatory domain updated:
[ 30.240000] cfg80211: DFS Master region: unset
[ 30.240000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 30.250000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 30.260000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 30.270000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 30.280000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 30.290000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 30.300000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 30.310000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 30.310000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 30.430000] ath: EEPROM regdomain: 0x0
[ 30.430000] ath: EEPROM indicates default country code should be used
[ 30.430000] ath: doing EEPROM country->regdmn map search
[ 30.430000] ath: country maps to regdmn code: 0x3a
[ 30.430000] ath: Country alpha2 being used: US
[ 30.430000] ath: Regpair used: 0x3a
[ 30.450000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 30.450000] ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=47
[ 30.460000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[ 30.460000] cfg80211: Calling CRDA for country: US
[ 30.470000] cfg80211: Regulatory domain changed to country: US
[ 30.480000] cfg80211: DFS Master region: FCC
[ 30.480000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 30.490000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 30.500000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
[ 30.510000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 30.520000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s)
[ 30.520000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 30.530000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 30.550000] ath: EEPROM regdomain: 0x0
[ 30.550000] ath: EEPROM indicates default country code should be used
[ 30.550000] ath: doing EEPROM country->regdmn map search
[ 30.550000] ath: country maps to regdmn code: 0x3a
[ 30.550000] ath: Country alpha2 being used: US
[ 30.550000] ath: Regpair used: 0x3a
[ 30.560000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 30.570000] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=40
[ 30.580000] usbcore: registered new interface driver ath9k_htc
[ 30.620000] RPC: Registered named UNIX socket transport module.
[ 30.620000] RPC: Registered udp transport module.
[ 30.630000] RPC: Registered tcp transport module.
[ 30.630000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 30.660000] tun: Universal TUN/TAP device driver, 1.6
[ 30.660000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 30.890000] usbcore: registered new interface driver rt2800usb
[ 30.900000] usbcore: registered new interface driver rtl8187
[ 30.930000] usbcore: registered new interface driver rtl8192cu
[ 30.980000] usbcore: registered new interface driver cdc_acm
[ 30.990000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 31.000000] usbcore: registered new interface driver cdc_wdm
[ 31.020000] nf_conntrack version 0.5.0 (1968 buckets, 7872 max)
[ 31.080000] usbcore: registered new interface driver ums-alauda
[ 31.080000] usbcore: registered new interface driver ums-cypress
[ 31.090000] usbcore: registered new interface driver ums-datafab
[ 31.100000] usbcore: registered new interface driver ums-freecom
[ 31.120000] usbcore: registered new interface driver ums-isd200
[ 31.130000] usbcore: registered new interface driver ums-jumpshot
[ 31.140000] usbcore: registered new interface driver ums-karma
[ 31.150000] usbcore: registered new interface driver ums-sddr09
[ 31.160000] usbcore: registered new interface driver ums-sddr55
[ 31.170000] usbcore: registered new interface driver ums-usbat
[ 31.200000] usbcore: registered new interface driver usbserial
[ 31.200000] usbcore: registered new interface driver usbserial_generic
[ 31.210000] usbserial: USB Serial support registered for generic
[ 31.300000] xt_time: kernel timezone is -0000
[ 31.310000] usbcore: registered new interface driver asix
[ 31.320000] usbcore: registered new interface driver cdc_ether
[ 31.340000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 31.360000] usbcore: registered new interface driver pl2303
[ 31.360000] usbserial: USB Serial support registered for pl2303
[ 31.380000] PPP generic driver version 2.4.2
[ 31.390000] NET: Registered protocol family 24
[ 31.400000] usbcore: registered new interface driver qmi_wwan
[ 31.410000] usbcore: registered new interface driver rndis_host
[ 31.420000] usbcore: registered new interface driver sierra_net
[ 31.430000] usbcore: registered new interface driver option
[ 31.440000] usbserial: USB Serial support registered for GSM modem (1-port)
[ 41.960000] device eth1 entered promiscuous mode
[ 41.960000] br-lan: port 1(eth1) entered forwarding state
[ 41.970000] br-lan: port 1(eth1) entered forwarding state
[ 41.980000] br-lan: port 1(eth1) entered disabled state
[ 43.980000] eth0: link up (1000Mbps/Full duplex)
[ 44.480000] eth1: link up (100Mbps/Full duplex)
[ 44.480000] br-lan: port 1(eth1) entered forwarding state
[ 44.490000] br-lan: port 1(eth1) entered forwarding state
[ 46.490000] br-lan: port 1(eth1) entered forwarding state
[ 48.000000] device wlan0 entered promiscuous mode
[ 48.080000] br-lan: port 2(wlan0) entered forwarding state
[ 48.080000] br-lan: port 2(wlan0) entered forwarding state
[ 48.390000] device wlan0-1 entered promiscuous mode
[ 48.410000] br-lan: port 3(wlan0-1) entered forwarding state
[ 48.410000] br-lan: port 3(wlan0-1) entered forwarding state
[ 48.990000] br-lan: port 3(wlan0-1) entered disabled state
[ 50.080000] br-lan: port 2(wlan0) entered forwarding state
[ 50.170000] br-lan: port 3(wlan0-1) entered forwarding state
[ 50.170000] br-lan: port 3(wlan0-1) entered forwarding state
[ 52.170000] br-lan: port 3(wlan0-1) entered forwarding state
[ 66.070000] device wlan1mon entered promiscuous mode
[ 181.140000] eth0: link down
[ 182.010000] eth1: link down
[ 182.140000] br-lan: port 1(eth1) entered disabled state
[ 182.640000] eth0: link up (1000Mbps/Full duplex)
[ 183.010000] eth1: link up (100Mbps/Full duplex)
[ 183.010000] br-lan: port 1(eth1) entered forwarding state
[ 183.020000] br-lan: port 1(eth1) entered forwarding state
[ 185.020000] br-lan: port 1(eth1) entered forwarding state
[ 199.720000] device wlan0-1 left promiscuous mode
[ 199.730000] br-lan: port 3(wlan0-1) entered disabled state
[ 200.470000] device wlan0 left promiscuous mode
[ 200.480000] br-lan: port 2(wlan0) entered disabled state
[ 202.470000] device wlan0 entered promiscuous mode
[ 202.540000] br-lan: port 2(wlan0) entered forwarding state
[ 202.540000] br-lan: port 2(wlan0) entered forwarding state
[ 202.580000] device wlan0-1 entered promiscuous mode
[ 202.600000] br-lan: port 3(wlan0-1) entered forwarding state
[ 202.600000] br-lan: port 3(wlan0-1) entered forwarding state
[ 204.540000] br-lan: port 2(wlan0) entered forwarding state
[ 204.600000] br-lan: port 3(wlan0-1) entered forwarding state
Hope that helps someone see something I'm missing