w1r3d.au
-
Posts
13 -
Joined
-
Last visited
Posts posted by w1r3d.au
-
-
So when I plugged in my Lan Turtle this morning I was able to install the dependencies for Quicikcreds without having to manually install them however I still cannot get the module to complete with saved creds.
I am testing on a Windows 10 22H2 workstation that is only locked.
When I plug in the Lan Turle I get the usual boot flashes and once the module is running I can see the led flashing on for a second then off for a second.
Once I open the ifconfig_dump.log file with 'cat' command I can only see the status features of the ethernet eh0, eth1 and lo connections.
eth0 Link encap:Ethernet HWaddr 00:13:37:A9:A6:F2 inet addr:172.16.84.1 Bcast:172.16.84.255 Mask:255.255.255.0 inet6 addr: fe80::213:37ff:fea9:a6f2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:142 errors:0 dropped:3 overruns:0 frame:0 TX packets:29 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:27148 (26.5 KiB) TX bytes:3770 (3.6 KiB) Interrupt:4 eth1 Link encap:Ethernet HWaddr 00:13:37:A9:A6:F0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:5 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:816 (816.0 B) TX bytes:816 (816.0 B)
When I open the responder.log I can see that the module was started but no creds.
Creds1 - Initiating Responder attack... Creds1 - Stopping dnsmasq Creds1 - Starting screen and Responder Creds1 - LED blink pattern during attack enabled Creds2 - Initiating Responder attack... Creds2 - Stopping dnsmasq Creds2 - Starting screen and Responder Creds2 - LED blink pattern during attack enabled Creds1 - Initiating Responder attack... Creds1 - Stopping dnsmasq Creds1 - Starting screen and Responder Creds1 - LED blink pattern during attack enabled Creds2 - Initiating Responder attack... Creds2 - Stopping dnsmasq Creds2 - Starting screen and Responder Creds2 - LED blink pattern during attack enabled Creds1 - Initiating Responder attack... Creds1 - Stopping dnsmasq Creds1 - Starting screen and Responder Creds1 - LED blink pattern during attack enabled Creds2 - Initiating Responder attack... Creds2 - Stopping dnsmasq Creds2 - Starting screen and Responder Creds2 - LED blink pattern during attack enabled Creds3 - Initiating Responder attack... Creds3 - Stopping dnsmasq Creds3 - Starting screen and Responder Creds3 - LED blink pattern during attack enabled Creds1 - Initiating Responder attack... Creds1 - Stopping dnsmasq Creds1 - Starting screen and Responder Creds1 - LED blink pattern during attack enabled Creds2 - Initiating Responder attack... Creds2 - Stopping dnsmasq Creds2 - Starting screen and Responder Creds2 - LED blink pattern during attack enabled
It feels like I am very close to getting this module to work and really appreciate the help
-
Hi fellow Hak5 users,
I am trying to get the Qucikcreds module to work on my lan turtle.
I have just also installed a 1tb sd card for storage to be able to run this module.
When I go into configure the module I get a message 'an sd card is required to install this module'
Is my sd card too big?? what could be the issue?
When I run the module on startup I get the numbered Creds folders with a ifconfig_dump.log file which does not look to have the creds of the user just some network stuff.
What I am I doing wrong? from Darrens vidoe it looked so easy maybe too easy
I was able to format the sd card while it was in the turle without any issues. Changed it to a 64gb sd card to test the size limits
-
q
in LAN Turtle
q
-
do you still have the Alfa products for sale?
-
dito I went direct, just have to wait a little bit longer for delivery
-
yes it is connected to the internet
I have been able to download modules and packages for the pineapple
-
Hi Guys and Gals,I am having issues setting the correct time with my Wifi Pineapple Mark VII version 2.1.3 .First issue which I cannot solve is that there is no timezone for where I am +9.5 Darwin is my actual timezone.When I select timezone +9 or +10 (it does not matter) and I update timezone and sync browser time for smoe reason my time is still not acurate.I am stuck in 2021 and cant change it no matter what I try.once again all help is greatly appreciated
-
Hi all,
Quick short question here
Does the O.MG plug use Hak5 Payload Studio to write and compile scripts?
-
Hi,
Have you looking into the LONG RANGE WIFI BOOSTER from Hak5?
https://shop.hak5.org/collections/wifi-gear/products/long-range-wifi-kit
I am also looking to extend my range.
How many of these would I need?
-
I went with the Hak5 Wifi pineapple mark VII from their website
Got to support the little guy
-
Hi All,
Has anyone had any experience with Hamgeek upgraded pineapples?
My mind is saying go with a genuine Hak5 pineapple
But my wallet is saying Hamgeek upgraded pineapple
The Hak5 model is ~$40 more expensive
My question is will these be locked out of firmware and software?
HamGeek claim the below
Specifications:
1. CPU: SoC 800MHz
2. Memory: 128MB RAM; ROM can be expanded by a U disk
3. Interface: USB 2.0 x 2, wired network port, Micro USB, RESET button, and system LED
4. WIFI: 300Mbps 2.4G, 1200Mbps 2.4G/5G AC dual-band
5. The power supply can be powered by a 5V power adapter or a power bank
6. External 6DB four antennas and built-in dual network card
7. Dimensions (LxWxT): 80 x 80 x 21mm/3.1 x 3.1 x 0.8"; Antenna length 20cm/7.9"
8. Its firmware is the latest official version, supporting online upgrade and factory reset
Advantages:
- Upgraded NANO hardware
- Dual-band WIFI
- Supporting 5G
- Double the CPU performance
- Double the memory capacity -
still selling your pineapple?
Lan Turtle Quickcreds
in LAN Turtle
Posted
Can you give me the steps and code you used wih the older version of responder?
Do I need to factory reset or delete all the modules and start from scratch?