w1r3d.au

Can you give me the steps and code you used wih the older version of responder? Do I need to factory reset or delete all the modules and start from scratch?

So when I plugged in my Lan Turtle this morning I was able to install the dependencies for Quicikcreds without having to manually install them however I still cannot get the module to complete with saved creds. I am testing on a Windows 10 22H2 workstation that is only locked. When I plug in the Lan Turle I get the usual boot flashes and once the module is running I can see the led flashing on for a second then off for a second. Once I open the ifconfig_dump.log file with 'cat' command I can only see the status features of the ethernet eh0, eth1 and lo connections. eth0 Link encap:Ethernet HWaddr 00:13:37:A9:A6:F2 inet addr:172.16.84.1 Bcast:172.16.84.255 Mask:255.255.255.0 inet6 addr: fe80::213:37ff:fea9:a6f2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:142 errors:0 dropped:3 overruns:0 frame:0 TX packets:29 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:27148 (26.5 KiB) TX bytes:3770 (3.6 KiB) Interrupt:4 eth1 Link encap:Ethernet HWaddr 00:13:37:A9:A6:F0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:5 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:816 (816.0 B) TX bytes:816 (816.0 B) When I open the responder.log I can see that the module was started but no creds. Creds1 - Initiating Responder attack... Creds1 - Stopping dnsmasq Creds1 - Starting screen and Responder Creds1 - LED blink pattern during attack enabled Creds2 - Initiating Responder attack... Creds2 - Stopping dnsmasq Creds2 - Starting screen and Responder Creds2 - LED blink pattern during attack enabled Creds1 - Initiating Responder attack... Creds1 - Stopping dnsmasq Creds1 - Starting screen and Responder Creds1 - LED blink pattern during attack enabled Creds2 - Initiating Responder attack... Creds2 - Stopping dnsmasq Creds2 - Starting screen and Responder Creds2 - LED blink pattern during attack enabled Creds1 - Initiating Responder attack... Creds1 - Stopping dnsmasq Creds1 - Starting screen and Responder Creds1 - LED blink pattern during attack enabled Creds2 - Initiating Responder attack... Creds2 - Stopping dnsmasq Creds2 - Starting screen and Responder Creds2 - LED blink pattern during attack enabled Creds3 - Initiating Responder attack... Creds3 - Stopping dnsmasq Creds3 - Starting screen and Responder Creds3 - LED blink pattern during attack enabled Creds1 - Initiating Responder attack... Creds1 - Stopping dnsmasq Creds1 - Starting screen and Responder Creds1 - LED blink pattern during attack enabled Creds2 - Initiating Responder attack... Creds2 - Stopping dnsmasq Creds2 - Starting screen and Responder Creds2 - LED blink pattern during attack enabled It feels like I am very close to getting this module to work and really appreciate the help

Hi fellow Hak5 users, I am trying to get the Qucikcreds module to work on my lan turtle. I have just also installed a 1tb sd card for storage to be able to run this module. When I go into configure the module I get a message 'an sd card is required to install this module' Is my sd card too big?? what could be the issue? When I run the module on startup I get the numbered Creds folders with a ifconfig_dump.log file which does not look to have the creds of the user just some network stuff. What I am I doing wrong? from Darrens vidoe it looked so easy maybe too easy I was able to format the sd card while it was in the turle without any issues. Changed it to a 64gb sd card to test the size limits

q

do you still have the Alfa products for sale?

dito I went direct, just have to wait a little bit longer for delivery

yes it is connected to the internet I have been able to download modules and packages for the pineapple

Hi Guys and Gals, I am having issues setting the correct time with my Wifi Pineapple Mark VII version 2.1.3 . First issue which I cannot solve is that there is no timezone for where I am +9.5 Darwin is my actual timezone. When I select timezone +9 or +10 (it does not matter) and I update timezone and sync browser time for smoe reason my time is still not acurate. I am stuck in 2021 and cant change it no matter what I try. once again all help is greatly appreciated

Hi all, Quick short question here Does the O.MG plug use Hak5 Payload Studio to write and compile scripts?

Hi, Have you looking into the LONG RANGE WIFI BOOSTER from Hak5? https://shop.hak5.org/collections/wifi-gear/products/long-range-wifi-kit I am also looking to extend my range. How many of these would I need?

I went with the Hak5 Wifi pineapple mark VII from their website Got to support the little guy

Hi All, Has anyone had any experience with Hamgeek upgraded pineapples? https://www.ebay.com.au/itm/155281097597?hash=item242779837d:g:HYwAAOSwhChi15wB&amdata=enc%3AAQAIAAAA4EikNKKr%2BfrOCNuPeRkyKF3SUi8nbUWEi56mju8zVgFfqoCB3D48DbR%2FToTxnfT%2FwqLLp0Hl%2F8dYBjhvkmc3hXdOjkBapYGqg0%2Fzbi80IKiFu%2FMRyucsNYLtsNggQ79NXdBSQpeQnUDRZvpG9VMtjZXEgJrSM8w4XvSdvb5hLBg9oO%2B3Ud%2Bn3AnMew6jA51AT428pQlGrUGqwSeOVvRrbYYJak7FUg56XMk4Mo0mOhSRok890AmOggp8XJYbztrbZ0x9H1ZMkhH6N7C95awZpQbuPhoaHdlIHOyaGkfaQS3r|tkp%3ABk9SR5Cw2d-CYg My mind is saying go with a genuine Hak5 pineapple But my wallet is saying Hamgeek upgraded pineapple The Hak5 model is ~$40 more expensive My question is will these be locked out of firmware and software? HamGeek claim the below Specifications:1. CPU: SoC 800MHz2. Memory: 128MB RAM; ROM can be expanded by a U disk3. Interface: USB 2.0 x 2, wired network port, Micro USB, RESET button, and system LED4. WIFI: 300Mbps 2.4G, 1200Mbps 2.4G/5G AC dual-band5. The power supply can be powered by a 5V power adapter or a power bank6. External 6DB four antennas and built-in dual network card7. Dimensions (LxWxT): 80 x 80 x 21mm/3.1 x 3.1 x 0.8"; Antenna length 20cm/7.9"8. Its firmware is the latest official version, supporting online upgrade and factory resetAdvantages:- Upgraded NANO hardware- Dual-band WIFI- Supporting 5G- Double the CPU performance- Double the memory capacity

still selling your pineapple?