Yousef Hanoun
Active Members-
Posts
20 -
Joined
-
Last visited
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
Yousef Hanoun's Achievements
Newbie (1/14)
-
i have tested 3cx o my LAN and it is very nice and simple VOIP system. i have a sony ericsson c905 and it is support SIP client on J2ME can some one advise which SIP client can i use on mobile phone to connect to 3cx system thanks,
-
Worked, SSID openwrt or unnamed network!!!
Yousef Hanoun replied to Yousef Hanoun's topic in WiFi Pineapples Mark I, II, III
Security Mode: WPA-PSK Security Key Info: TKIP these are settings i used on my home router. -
Worked, SSID openwrt or unnamed network!!!
Yousef Hanoun replied to Yousef Hanoun's topic in WiFi Pineapples Mark I, II, III
thanks for replay, yes karma is on and also vista is auto connecting to my home ssid, so when i true off the actual home ssid off(wirless router). Fon do not tell my laptop that he is my home ssid !!! thanks, -
OpenVPN to connect to Internet
Yousef Hanoun replied to Yousef Hanoun's topic in WiFi Pineapples Mark I, II, III
installation did not complete there was an error! -
OpenVPN to connect to Internet
Yousef Hanoun replied to Yousef Hanoun's topic in WiFi Pineapples Mark I, II, III
thanks again, that what i did when i used openvpn_2.0.9-5_mips.ipk but i recived the following error root@OpenWrt:~# ipkg install openvpn_2.0.9-5_mips.ipk Installing openvpn (2.0.9-5) to root... Nothing to be done An error ocurred, return value: 28. Collected errors: Only have 0 available blocks on filesystem /, pkg openvpn needs 385 root@OpenWrt:~# could please advise which package did you use it. thanks, Yousef -
OpenVPN to connect to Internet
Yousef Hanoun replied to Yousef Hanoun's topic in WiFi Pineapples Mark I, II, III
thanks again. ok now Fon is connected to internet using ICS with DHCP on FON in LAN network , but failed to find the package plz help i did check the fourm nothing usefull found. root@OpenWrt:~# ipkg update Downloading http://downloads.openwrt.org/kamikaze/7.09/atheros-2.6/packages/Packages Updated list of available packages in /usr/lib/ipkg/lists/release Downloading http://downloads.openwrt.org/kamikaze/packages/mips/Packages wget: server returned error: HTTP/1.1 404 Not Found Downloading http://downloads.x-wrt.org/xwrt/kamikaze/7.09/atheros-2.6/packages/Packages Updated list of available packages in /usr/lib/ipkg/lists/X-Wrt An error ocurred, return value: 1. Collected errors: ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp -q -P /tmp/ipkg-UCMjJw http://downloads.openwrt.org/kamikaze/packages/mips/Packages' root@OpenWrt:~# ipkg search openvpn Done. root@OpenWrt:~# ipkg install openvpn Nothing to be done An error ocurred, return value: 4. Collected errors: Cannot find package openvpn. Check the spelling or perhaps run 'ipkg update' -
Hi, i want to make a vpn connection to dial to vpn server so client connected to Jasager will have internet through. but when i try to go to this link http://192.168.1.1/cgi-bin/webif/vpn-openvpn.sh i get this OpenVPN Installing openvpn package ... Nothing to be done An error ocurred, return value: 4. Collected errors: Cannot find package openvpn. Check the spelling or perhaps run 'ipkg update' Downloading http://downloads.openwrt.org/kamikaze/7.09/atheros-2.6/packages/Packages wget: bad address 'downloads.openwrt.org' Downloading http://downloads.openwrt.org/kamikaze/packages/mips/Packages wget: bad address 'downloads.openwrt.org' Downloading http://downloads.x-wrt.org/xwrt/kamikaze/7.09/atheros-2.6/packages/Packages wget: bad address 'downloads.x-wrt.org' An error ocurred, return value: 3. Collected errors: ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp -q -P /tmp/ipkg-2blcp9 http://downloads.openwrt.org/kamikaze/7.09/atheros-2.6/packages/Packages' ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp -q -P /tmp/ipkg-2blcp9 http://downloads.openwrt.org/kamikaze/packages/mips/Packages' ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp -q -P /tmp/ipkg-2blcp9 http://downloads.x-wrt.org/xwrt/kamikaze/7.09/atheros-2.6/packages/Packages' Nothing to be done An error ocurred, return value: 4. Collected errors: Cannot find package openvpn. Check the spelling or perhaps run 'ipkg update' which mean FON can not connect to internet to download the package ?! then i uploaded openvpn_2.0.9-5_mips.ipk using winSCP and then tried to install but i get the following error. root@OpenWrt:~# ipkg install openvpn_2.0.9-5_mips.ipk Installing openvpn (2.0.9-5) to root... Nothing to be done An error ocurred, return value: 28. Collected errors: Only have 0 available blocks on filesystem /, pkg openvpn needs 385 root@OpenWrt:~# please help
-
HOWTO DDWRT to OpenWRT
Yousef Hanoun replied to Yousef Hanoun's topic in WiFi Pineapples Mark I, II, III
-
HOWTO DDWRT to OpenWRT
Yousef Hanoun replied to Yousef Hanoun's topic in WiFi Pineapples Mark I, II, III
thanks, i did flash my FON with openwrt firmware, still the same i am not getting the promot for more than 1:30hr i used the following files openwrt-atheros-2.6-root.squashfs openwrt-atheros-2.6-vmlinux.lzma help.... note: i am tried the TFTP way from http://wiki.cuwin.net/index.php?title=Flas...ra_with_OpenWRT RedBoot> ip_address -l 192.168.1.254/24 -h 192.168.1.166 IP: 192.168.1.254/255.255.255.0, Gateway: 0.0.0.0 Default server: 192.168.1.166 RedBoot> fis init About to initialize [format] FLASH image system - continue (y/n)? y *** Initialize FLASH Image System ... Erase from 0xa87e0000-0xa87f0000: . ... Program from 0x80ff0000-0x81000000 at 0xa87e0000: . RedBoot> load -r -b 0x80041000 openwrt-atheros-2.6-root.squashfs Using default protocol (TFTP) Raw file loaded 0x80041000-0x80160fff, assumed entry at 0x80041000 RedBoot> fis create -l 0x06F0000 rootfs ... Erase from 0xa8030000-0xa8720000: .......................................... ..................................................................... ... Program from 0x80041000-0x80161000 at 0xa8030000: .................. ... Erase from 0xa87e0000-0xa87f0000: . ... Program from 0x80ff0000-0x81000000 at 0xa87e0000: . RedBoot> load -r -b 0x80041000 openwrt-atheros-2.6-vmlinux.lzma Using default protocol (TFTP) Raw file loaded 0x80041000-0x80100fff, assumed entry at 0x80041000 RedBoot> fis create -r 0x80041000 -e 0x80041000 vmlinux.bin.l7 ... Erase from 0xa8720000-0xa87e0000: ............ ... Program from 0x80041000-0x80101000 at 0xa8720000: ............ ... Erase from 0xa87e0000-0xa87f0000: . ... Program from 0x80ff0000-0x81000000 at 0xa87e0000: . RedBoot> fis load -l vmlinux.bin.l7 Image loaded from 0x80041000-0x80290085 RedBoot> exec still the same could not telnet to 192.168.1.1 BTW it took only 2 min. at fis create -l 0x06F0000 rootfs not 20min. i think the process not correctly completed i repeated the steps again lol it worked now able to telnet 192.168.1.1 :D i will try now to finish the reset thanks all -
HOWTO DDWRT to OpenWRT
Yousef Hanoun replied to Yousef Hanoun's topic in WiFi Pineapples Mark I, II, III
it was Local IP ;) i found this hacking-the-la-fonera i have used now both of the flash tools Freifunk Ap51 EasyFlash and Gargoyle Fon Flash and i can see both of them able to deteced the FON but now i can not access the Fon i can only do redboot telnet on port 9000 or redboot using serial. please help what should i do !!! :o i will try this recover http://flash.fonera.be/ -
HOWTO DDWRT to OpenWRT
Yousef Hanoun replied to Yousef Hanoun's topic in WiFi Pineapples Mark I, II, III
i think i have to set BOOTP to false Use BOOTP for network configuration: false Gateway IP address: Local IP address: Local IP address mask: Default server IP address: Console baud rate: 9600 GDB connection port: 9000 so which one i have to set the redboot telnet server ip ? Gateway / Local IP / Default server -
HOWTO DDWRT to OpenWRT
Yousef Hanoun replied to Yousef Hanoun's topic in WiFi Pineapples Mark I, II, III
right now i am able to log to Redboot loader using the COM port, now please help how enable telnet for redboot note: i have tried this cmd fconfig -i Initialize non-volatile configuration - continue (y/n)? y Run script at boot: false Use BOOTP for network configuration: true Default server IP address: 192.168.1.254 Console baud rate: 9600 GDB connection port: 9000 Force console for special debug messages: false Network debug at boot time: false Update RedBoot non-volatile configuration - continue (y/n)? y ******************************************************************** still could not telnet redboot port 9000 -
HOWTO DDWRT to OpenWRT
Yousef Hanoun replied to Yousef Hanoun's topic in WiFi Pineapples Mark I, II, III
thanks again i order the following converter RS232ToTTL and i hope i will be able to update firmware or enable redboot configuration using serial cable. i will update once i have it. B) -
HOWTO DDWRT to OpenWRT
Yousef Hanoun replied to Yousef Hanoun's topic in WiFi Pineapples Mark I, II, III
i used FON FLASH but still the same :o Expect arp with length 60, received 42 Non arp received. Make sure, the device is connected directly! Peer MAC: 00:18:84:1a:f8:e4 Peer IP : 0.0.0.0 Telnet for RedBoot not enabled.