Slippy
-
Posts
18 -
Joined
-
Last visited
Posts posted by Slippy
-
-
I'm not exactly sure. The apk itself changed a lot after 413, so some of the patches might not be needed on later versions. Also some may not have been done yet. 413 remains my favorite, and maybe even the favorite of the folks making the patches! Unless using a Spark, or using a Mavic with the quickshot firmware, I'm not sure there is any good reason to use anything but 413.
-
On 2017-09-26 at 11:17 AM, oakman said:
ok so I'm patching v419 as it seems v4110 is not patchable due to added security and it's building a v37. Is there a way to see what's changed between versions ? v36 added Spark waypoint compatibility apparently ? Thanks !
The very best way to observe the changes is to mirror the repo, you can then see the literal changes and choose to mirror them again.
-
On 2017-08-29 at 12:28 AM, Aladin said:
What do you think about it ? Could the range effectively be a combination of soft and hard limitation ?
Possibly. 0700 is a popular firmware if you were wanting to experiment.
32 minutes ago, Koncio said:I just try on W10 and W7 with few DJI versions and recived this error all the time. CMD and GUI tested.
Can You help ?
Now that is a new one! Knowing Bin4ry he'll probably have an explanation at some point, but I recently patched 418 and it didn't do that.
-
More good news! Another patch is available for Bin4ry's amazing patcher, this one restores flight path viewing to the app. Special thanks to some Russian dudes!
-
On 2017-08-24 at 4:57 AM, Tanos said:
Is there any chance modifying the bitrate of the Mavic?
I looked and looked and looked some more through the apk and while there are most certainly many references to bitrate, not a single one of them indicated that the bitrate details are part of the apk itself, which suggests to me that it is in the firmware.
-
48 minutes ago, Invernomuto said:
Is it true that the latest DJI spark update blocks Exploit?
I'm not sure but I would assume that any update after all this started a few weeks ago has the potential to block exploit.
-
joe2000 don't worry about that error you can ignore it, its just a rename error after the patching gets done, and it is fixed also in the latest version.
btw 413 has more patches available and has been tested a great deal, im sticking with 413 it works great!
-
On 2017-07-25 at 6:09 AM, Invernomuto said:
hi guys,
I followed the steps but when I run runme.bat (administer mode) says file not found.
can you post screenshot? it should be reporting what file isn't found so image will give clue. If you haven't got the most recent version do try that first.
-
2 hours ago, bme2008 said:
I created the apk from both Bin4ry as well as Pathogenius. The first one did open but crashed, the last one did run. Seeing the latest modifications I'm assuming it's the latest version. Could it be a phone limitation?
the patho repo is a mirror of the master from Bin4ry, and since they are both identical as of this typing, you might want to try again.
-
4 hours ago, bme2008 said:
Thanks for all the progress, I've just installed the modded .apk and installed it on a HTC Desire 610. I was able to "login" with e-mail "a" and password "b". While flying with the DJI Spark I've managed to raise the altitude much higher than the max of 120 meters (EU). Unfortunately the video feed is very choppy, while the Spark itself seems to respond quite good. Seen some comments about the video feed, but not sure if it depends on the used phone, for example the Desire in my case. Are there any settings in the DJI App source to finetune this part?
The most recent version has some major cleanups that might prove to make the app more responsive. I notice the video is much smoother now on my device.
-
On 2017-07-12 at 2:38 PM, Bin4ry said:
Nice :-) You could open a pull request at my repo and then i can merge it.
Best Regards
Okiedoke I think I managed to do one of those now.
Also I almost put in a manual delete of that lone leftover .orig file, but then I thought since it is a failure of some sort I'd leave it in, maybe someone will be able to figure out what the issue is. Cheers!
The failure was on my end and there is no failure in fact, v22 is golden
-
Just now, Bin4ry said:
Hm i think this is an issue from patch.exe for windows then .... cannot help you unfortunatly. Maybe just use bash shell for Windows10 ;-)
Best Regards
The error may be cosmetic, it does do the patch, it just doesn't delete the leftover .orig file. A mystery indeed!
v21 looking great! I fixed the unknown.patch call errors in runme.bat, sorry I am brand new at using github don't know what the proper procedure is yet.
-
\smali_classes5\dji\pilot\publics\objects\DJIGlobalService.smali.orig isn't getting deleted after being patched for some reason
-
14 hours ago, Slippy said:
3) DJIGlobalService.smali.orig was not being deleted
-
13 hours ago, Slippy said:
2) fixed diff error
3) I cant fix it, best guess file too large for W32
4) fixed path error
-
16 hours ago, Slippy said:
1) 4 or so of the patch files weren't CR/LF fixed for patch.exe and thusly failed until I used my uber leet skills to fix them
2) removeSocial fails, malformed patch facebook/d.smali
3) Smaling smali_classes5 reports Unknown file type ignoring DJIGlobalService.smali.orig
W32 (v9)
1) someone added advanced lines of mega code to fix this issue
2) 'error' persists
3) 'error' persists
A new 'error' occurs
4) at 'removing nfz...', attempt to delete reports could not find decompile_out\lib\libSDKRelativeJNI.so
-
13 hours ago, Bin4ry said:
Just fyi, i pushed some interesting updates to github. Removed all the online communications and some more.
Check it out on github :-)
Neat stuff!
Sorry ahead of time if this is the wrong place for the following?
I had a few issues:
1) 4 or so of the patch files weren't CR/LF fixed for patch.exe and thusly failed until I used my uber leet skills to fix them
2) removeSocial fails, malformed patch facebook/d.smali
3) Smaling smali_classes5 reports Unknown file type ignoring DJIGlobalService.smali.orig
Hey does this make me a contributor now?
-
1
-
Remove CE limits from DJI products and other fun stuff in DJI Go4
in Community Projects
Posted · Edited by Slippy
I don't think 413 has that option no, cant test for sure because I have the caching disabled entirely. Sure I don't see why a patch for that wouldn't be possible, way beyond me thought! :-)