[Serial Driver]

; Windows USB CDC ACM Setup File

; Based on INF template which was:
;     Copyright (c) 2000 Microsoft Corporation
;     Copyright (c) 2007 Microchip Technology Inc.
; likely to be covered by the MLPL as found at:
;    <http://msdn.microsoft.com/en-us/cc300389.aspx#MLPL>.
; For use only on Windows operating systems.

[Version]
Signature="$Windows NT$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%Linux%
DriverVer=11/15/2007,5.1.2600.0

[Manufacturer]
%Linux%=DeviceList, NTamd64

[DestinationDirs]
DefaultDestDir=12


;------------------------------------------------------------------------------
;  Windows 2000/XP/Vista-32bit Sections
;------------------------------------------------------------------------------

[DriverInstall.nt]
include=mdmcpq.inf
CopyFiles=DriverCopyFiles.nt
AddReg=DriverInstall.nt.AddReg

[DriverCopyFiles.nt]
usbser.sys,,,0x20

[DriverInstall.nt.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,USBSER.sys
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"

[DriverInstall.nt.Services]
AddService=usbser, 0x00000002, DriverService.nt

[DriverService.nt]
DisplayName=%SERVICE%
ServiceType=1
StartType=3
ErrorControl=1
ServiceBinary=%12%\USBSER.sys

;------------------------------------------------------------------------------
;  Vista-64bit Sections
;------------------------------------------------------------------------------

[DriverInstall.NTamd64]
include=mdmcpq.inf
CopyFiles=DriverCopyFiles.NTamd64
AddReg=DriverInstall.NTamd64.AddReg

[DriverCopyFiles.NTamd64]
USBSER.sys,,,0x20

[DriverInstall.NTamd64.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,USBSER.sys
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"

[DriverInstall.NTamd64.Services]
AddService=usbser, 0x00000002, DriverService.NTamd64

[DriverService.NTamd64]
DisplayName=%SERVICE%
ServiceType=1
StartType=3
ErrorControl=1
ServiceBinary=%12%\USBSER.sys


;------------------------------------------------------------------------------
;  Vendor and Product ID Definitions
;------------------------------------------------------------------------------
; When developing your USB device, the VID and PID used in the PC side
; application program and the firmware on the microcontroller must match.
; Modify the below line to use your VID and PID.  Use the format as shown
; below.
; Note: One INF file can be used for multiple devices with different
;       VID and PIDs.  For each supported device, append
;       ",USB\VID_xxxx&PID_yyyy" to the end of the line.
;------------------------------------------------------------------------------
[SourceDisksFiles]
[SourceDisksNames]
[DeviceList]
%DESCRIPTION%=DriverInstall, USB\VID_F000&PID_FFF0, USB\VID_F000&PID_FFF0&MI_00

[DeviceList.NTamd64]
%DESCRIPTION%=DriverInstall, USB\VID_F000&PID_FFF0, USB\VID_F000&PID_FFF0&MI_00


;------------------------------------------------------------------------------
;  String Definitions
;------------------------------------------------------------------------------
;Modify these strings to customize your device
;------------------------------------------------------------------------------
[Strings]
Linux               = "Linux Developer Community"
DESCRIPTION         = "Gadget Serial"
SERVICE             = "USB RS-232 Emulation Driver"

 

[Run on Battery for instant attacks?]

@Problex Darren mentioned the possibility and desire to work on the boot time.

[RNDIS driver fails to install Windows 7]

As a follow up you should be able to follow my instructions over here until step 4: 

Once you hit step 4 select 'Let me pick from a list of device drivers on my computer'. Scroll down and select `Microsoft Corporation`, select `Remote NDIS Compatible Device`, click next, Click Yes.

[RNDIS driver fails to install Windows 7]

Hey @TeCHemically

What switch did you have it set to? Try what @WatskeBart said and set one of the payloads to RNDIS_ETHERNET. You should be able to do this from arming mode or over serial. I haven't played with my bunny much yet so can't give you guidance on the internet sharing. This should give you a good start.

[Windows 7 "was unable to install your CDC Serial"]

oops! @ChaoticSecurity That was meant for you. I was having the same CDC serial issue and this did the trick for me.

[Windows 7 "was unable to install your CDC Serial"]

@Cpt.Pickles 

1. Open Device Manager
2. Right click on CDC Serial under 'Other devices'
3. Left click 'Update Driver Software...'
4. Left click 'Browse my computer for driver software'
5. Left click 'Browse...' and select the drive letter of your BashBunny
6. Left click 'Next'.
7. Left click 'Install this driver software anyway' (If you get a Windows Security popup).
8. Click 'Close'
9. Profit

At this point you should see 'Gadget Serial (COM#)' under 'Ports (COM & LPT). Let me know if that helps. Cheers.