[Modules- internal only?]

OK, mounted it as /sd. Now I have the option o install modules to internal or sd. Rock and roll :)

[Modules- internal only?]

It was NTFS, now its ext4, relearning fdisk......  Now to relearn mnt... believe it should mount as /sd

[Modules- internal only?]

fdisk -l does show it as /dev/sda1

[Modules- internal only?]

Should have looked at this bfore upgrading to 3.0 I think. Supposedly there was a format option in older firmware; don't see it here.

[Modules- internal only?]

1 minute ago, mojo0243 said:

Yes the dip switches all go up unless you program them to do anything else specifically like toggle wlan1. 

As far as the micro sd card goes you may have to format it for it to recognize it as swap memory.  Otherwise it will not see the micro sd card and wont use it for available storage.

Format it over ssh? That's gonna require some googling....

[Modules- internal only?]

Using the 3.0 Beta firmware. When I install a module it gives button "install to internal storage", nothing about sd card. There is an sd card in the Pineapple but not sure what use it is. What can the sd card be used for?

 

Unrelated but rather than start a new thread, with 3.0 firmware the dip switches all go up, right?

 

Thanks!

[NO infusion is available]

Just upgraded to 3.0; rather proud of myself :D Whole new interface now .

[NO infusion is available]

I figured it out! The thing at top, click infusions, then title of pineapple bar. Top "infusions thing actually seems to do nothing....

[NO infusion is available]

7 minutes ago, mojo0243 said:

I'm confused now because I don't have a triangle at all.  Mine when you click on pineapple bar opens a new window with 4 tabs and the second tab lists all of the available infusions for install.

Totally different :(

[NO infusion is available]

10 minutes ago, mojo0243 said:

Are you running the 3.0 firmware?

No, 2.4, looks just like the screenie above.

[NO infusion is available]

16 hours ago, mojo0243 said:

When you open the pineapple bar there are are tabs at the top.  The first tab is install infusions which if you just updated to version 2.4.0 firmware you won't have any.  Then the second tab I can't remember what it says at the moment but that is where it will list all of the infusions that are available for install from wifipineapple.

Mine has "infusions" with a sideways triangle at the upper left. Clicking the triangle gives option of "infusions". Clicking it does nothing.

[NO infusion is available]

Mine is same, am I doing something wrong? Should there be a list, a big one even, of available infusions?

[Bricked Mark 5?]

5 hours ago, mojo0243 said:

WVDevil as far as the book goes of course since it is coming out now after the release of the nano and the tetra it will be based more around using those.  However the concepts are still the same regardless of which one you are using the difference is how modules work and which ones are available but if you understand the concepts and how they work not just how to use a module then you can use either pineapple.  The difference is the ease of use and how the interface works.

Old hardware gives way to new, its the way of our world. Eventually I'll update my Pineapple to the latest to take advantage of the book. Glad it was written, I need the knowledge!

[Bricked Mark 5?]

Worked perfectly. Unbricked. Again, thank you. Now to do some reading...

[Bricked Mark 5?]

Thanks!

[Bricked Mark 5?]

Have a Mark 5 I've had for a while and only used it once. Got the book today (which btw seems to barely mention the old Mark 5) and decided to try it again. Don't recall password so decided to reset it. Used the DIP switches (10011) and booted it. Had green steady and flashing blue forever. Shut it off and retried. Now have steady green and steady red in either normal mode or reset mode. Am I toast?

 

Thanks!