The_challanger
-
Posts
12 -
Joined
-
Last visited
Posts posted by The_challanger
-
-
Hey ALFA ALFA ,
big thanks for your effort, your tuttorial worked well for me in the 1st time then i wanted to edit the hostapd.conf file to change the ap name and password and then i typed: hostapd -d -B /etc/hostapd/hostapd.conf so i got this error message nl80211 could not configure driver mode...i restarted my kali linux 2.0 but i got the same. maybe the hostapd still running after restart idk.
thanks again man!
-
Dude, seriously....
oops I think i got into the wrong forum...
-
root@kali:~# systemctl status
● kali
State: degraded
Jobs: 0 queued
Failed: 5 units
Since: Thu 2015-12-24 04:45:28 EST; 8h ago
CGroup: /
├─1 /sbin/init
├─system.slice
│ ├─avahi-daemon.service
│ │ ├─826 avahi-daemon: running [kali.local
│ │ └─827 avahi-daemon: chroot helpe
│ ├─inetd.service
│ │ └─516 /usr/sbin/inetd -i
│ ├─dbus.service
│ │ └─536 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
│ ├─ModemManager.service
│ │ └─509 /usr/sbin/ModemManager
│ ├─cron.service
│ │ └─513 /usr/sbin/cron -f
│ ├─wpa_supplicant.service
│ │ └─24903 /sbin/wpa_supplicant -u -s -O /run/wpa_supplicant
│ ├─accounts-daemon.service
│ │ └─507 /usr/lib/accountsservice/accounts-daemon
│ ├─colord.service
│ │ └─719 /usr/lib/colord/colord
│ ├─atd.service
│ │ └─511 /usr/sbin/atd -f
│ ├─systemd-journald.service
│ │ └─189 /lib/systemd/systemd-journald
│ ├─udisks2.service
│ │ └─1053 /usr/lib/udisks2/udisksd --no-debug
│ ├─upower.service
│ │ └─706 /usr/lib/upower/upowerd
│ ├─packagekit.service
│ │ └─838 /usr/lib/packagekit/packagekitd
│ ├─systemd-logind.service
│ │ └─522 /lib/systemd/systemd-logind -
root@kali:~# journalctl -xn
-- Logs begin at Thu 2015-12-24 04:45:32 EST, end at Thu 2015-12-24 13:04:34 EST. --
Dec 24 13:04:15 kali isc-dhcp-server[42588]: ^
Dec 24 13:04:15 kali isc-dhcp-server[42588]: Configuration file errors encountered -- exiting
Dec 24 13:04:15 kali isc-dhcp-server[42588]: If you think you have received this message due to a bug rather
Dec 24 13:04:15 kali isc-dhcp-server[42588]: than a configuration issue please read the section on submitting
Dec 24 13:04:15 kali isc-dhcp-server[42588]: bugs on either our web page at www.isc.org or in the README file
Dec 24 13:04:15 kali isc-dhcp-server[42588]: before submitting a bug. These pages explain the proper
Dec 24 13:04:15 kali isc-dhcp-server[42588]: process and the information we find helpful for debugging..
Dec 24 13:04:15 kali isc-dhcp-server[42588]: exiting.
Dec 24 13:04:26 kali dhclient[24972]: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8
Dec 24 13:04:34 kali dhclient[24972]: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12 -
ok here is my /etc/dhcpd.conf
authoritative;
default-lease-time 600;
max-lease-time 7200;
subnet 192.168.1.128 netmask 255.255.255.128 {
option subnet-mask 255.255.255.128;
option broadcast-address 192.168.1.255;
option routers 192.168.1.129;
option domain-name-servers 8.8.8.8;
range 192.168.1.130 192.168.1.140;
}and then i typed this
root@kali:~# ifconfif at0 192.168.1.129 netmask 255.255.255.128
bash: ifconfif: command not found
root@kali:~# route add -net 192.168.1.128 netmask 255.255.255.128 gw 192.168.1.129
root@kali:~# echo 1 > /proc/sys/net/ipv4/ip_forward
root@kali:~# iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE
root@kali:~# iptables --append FORWARD --in-interface at0 -j ACCEPT
root@kali:~# iptables -t nat -A PREROUTING -p tcp --dport 80 -j DNAT --to-destination 192.168.246.128:80
root@kali:~# iptables -t nat -A POSTROUTING -j MASQUERADE
root@kali:~# dhcpd -cf /etc/dhcpd.conf -pf /var/run/dhcpd.pid at0so i got this;
Internet Systems Consortium DHCP Server 4.3.3
Copyright 2004-2015 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Config file: /etc/dhcpd.conf
Database file: /var/lib/dhcp/dhcpd.leases
PID file: /var/run/dhcpd.pid
lease 192.168.1.100: no subnet.
lease 192.168.1.100: no subnet.
lease 192.168.1.100: no subnet.
Wrote 0 leases to leases file.
Listening on LPF/at0/c4:e9:84:0c:91:e6/192.168.1.128/25
Sending on LPF/at0/c4:e9:84:0c:91:e6/192.168.1.128/25
and then i typed this:/etc/init.d/isc-dhcp-server start
this is what got
[....] Starting isc-dhcp-server (via systemctl): isc-dhcp-server.serviceJob for isc-dhcp-server.service failed. See 'systemctl status isc-dhcp-server.service' and 'journalctl -xn' for details.
failed! -
I meant explaining every step in the process ( i guess i was asking for too much)..."google"...What is that?!!! i read almost every article i found on google. this is the only forum i signed for hoping to learn new stuff.
-
thank you guys,
i followed alfa alfa's Tutorial with no success then i tried many methods to set up a dhcp server and failed, so can you guys help me out here and explain everything about this to me.
-
Sorry for the delay I only had 3 posts yesterday, im not running any server, just created a faje ap after running airodump-ng and then airbase-ng with same mac adress and network name of my home network. .. what I noticed is when I look for my fake ap sometimes it shows the fake one and sometimes it shows the real one.
-
Access point with BSSID started
Client ############ associated (unencrypted) to ESSID "WIFI NAME"
And MY android phone keep saying getting ip address
-
Thnx for the quick reply mr cooper, the client when trying to connect to the fake AP gets a message saying its taking too long to connect
-
Hello everyone;
So I wanted to make a fake access point using airbase-ng;
So I types airbase-ng -a bssid --essid "essid" -c # interface
The rogue ip started but I cant log on it and said its taking too long
Ps: I have tp-link 722 wifi adapter
No access to my fake AP
in Hacks & Mods
Posted · Edited by The_challanger
Hey ALF how is it going; so I guess my problem was that the hostapd keep running even after i restart my kali linux, so i run "ps ax" and then kill hostapd pid (i wonder if there's a command line to do that)...anyway now i know how to create a an access point using hostapd the question now is how to create an evil twin ap using hostapd with same bssid and essid and channel of let's say my neighbor's network and its must be open so i can force him to connect to my fake ap when i deauth his network.