[Flashing through Serial Issues]

ar7240> printenv

bootargs=console=ttyS0,115200 root=31:02 rootfstype=squashfs init=/sbin/init mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),14336k(rootfs),1600k(uImage),64k(NVRAM),64k(ART) REVISIONID

bootcmd=bootm 0x9f050000

bootdelay=4

baudrate=115200

ethaddr=0x00:0xaa:0xbb:0xcc:0xdd:0xee

ipaddr=192.168.2.10

serverip=192.168.2.100

stdin=serial

stdout=serial

stderr=serial

ethact=eth0

Environment size: 374/65532 bytes

[Flashing through Serial Issues]

Completed the flash and getting 'Bad magic number' when trying to boot up.

Is this because it is the 64MB version?

[Flashing through Serial Issues]

Changed IP to .100 and flashing just now :) Ill let you know how it goes

[Flashing through Serial Issues]

Hi Guys

I have the Alfa AP121 and I get it connected via Putty through serial.. Here is the log below

U-Boot 1.1.4 (Jul 24 2013 - 15:16:09)

AP121 (ar9331) U-boot

DRAM: 64 MB

Top of RAM usable for U-Boot at: 84000000

Reserving 149k for U-Boot at: 83fd8000

Reserving 192k for malloc() at: 83fa8000

Reserving 44 Bytes for Board Info at: 83fa7fd4

Reserving 36 Bytes for Global Data at: 83fa7fb0

Reserving 128k for boot params() at: 83f87fb0

Stack Pointer at: 83f87f98

Now running in RAM - U-Boot at: 83fd8000

Flash Manuf Id 0xc2, DeviceId0 0x20, DeviceId1 0x18

flash size 16777216, sector count = 256

Flash: 16 MB

Using default environment

In: serial

Out: serial

Err: serial

Net: ag7240_enet_initialize...

Fetching MAC Address from 0x83ff0608

Fetching MAC Address from 0x83ff0608

: cfg1 0x5 cfg2 0x7114

eth0: 00:c0:ca:74:45:81

eth0 up

: cfg1 0xf cfg2 0x7214

eth1: 00:c0:ca:74:45:80

athrs26_reg_init_lan

ATHRS26: resetting s26

ATHRS26: s26 reset done

eth1 up

eth0, eth1

Hit any key to stop autoboot: 0

## Booting image at 9f050000 ...

Bad Magic Number

I dont get any option to press 1-3 but I believe it already boots in. I run the first command from the tutorial but the 'saveenv' command isnt found.

If I move onto the next step then tftp tries to flash from 192.168.2.100 instead of 192.168.2.11 but the static IP is set within windows for it and shows in ipconfig

Any ideas?

Thanks,

Kevin.

[Reaver Pro ~~ Wifi Pineapple]

I have the Reaver Pro device and its limited. They have compiled the kernel WITHOUT USB Support. Pain in my ass (apologies for my french)

Something I want to query... Is it possible for me to flash the Pineapple software onto this device for free?? Is that allowed by hak5??

Also I have checked the files they use. They have made there own branded version of aircrack on the device called aircracktns and they use php and sh scripts to run the commands. Very basic.

I wouldnt recommend to be honest. I am thinking of flashing my device to the pineapple software (only if its allowed and if it can be done)