Mk2 flashed with Mk3 package install problem in WiFi Pineapples Mark I, II, III Posted July 22, 2013 · Edited July 22, 2013 by La_Vallette Attached is the boot information obtained from Serial of which I assume is wifi Pineapple mk2. (pic below) My question is if all basic components like firmware etc is the latest I could flash or if there is something newer. I changed it's ip address from 172.16.42.1 to 192.168.1.110 in order to connect it to my default gateway. My pineapple has access to the internet as I tried ping google.com with success. I am trying to update my packages with opkg update but the link seems to be down. root@Pineapple:~# opkg update Package opkg version 4564-3.1 has no valid architecture, ignoring. Downloading http://downloads.openwrt.org/snapshots/trunk/atheros/packages/Packages.gz. Updated list of available packages in /var/opkg-lists/barrier_breaker. Downloading http://downloads.x-wrt.org/xwrt/snapshots/trunk/atheros/packages/Packages.gz. Collected errors: * opkg_download: Failed to download http://downloads.x-wrt.org/xwrt/snapshots/trunk/atheros/packages/Packages.gz, wget returned 4. How can I fix this ? Is there any other way? I cannot install any jasager version, madwifi, kmod etc.. root@Pineapple:~# opkg install jasager_2.1-1_mips.ipk Package opkg version 4564-3.1 has no valid architecture, ignoring. Unknown package 'jasager'. Collected errors: * pkg_hash_fetch_best_installation_candidate: Packages for jasager found, but incompatible with the architectures configured * opkg_install_cmd: Cannot install package jasager. I aprecciate if you can point me to recommended jasager and webif versions.. thanks +PHY ID is 0022:5521 Ethernet eth0: MAC address 00:12:cf:a4:90:50 IP: 192.168.0.1/255.255.255.0, Gateway: 0.0.0.0 Default server: 0.0.0.0 RedBoot(tm) bootstrap and debug environment [ROMRAM] Non-certified release, version v1.3.4 - built 19:22:52, Oct 15 2007 Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. Board: ap51 RAM: 0x80000000-0x82000000, [0x8003eaf0-0x80fe1000] available FLASH: 0xa8000000 - 0xa87f0000, 128 blocks of 0x00010000 bytes each. == Executing boot script in 3.000 seconds - enter ^C to abort RedBoot> fis load -l vmlinux.bin.l7 Image loaded from 0x80041000-0x802a73e0 RedBoot> exec Now booting linux kernel: Base address 0x80030000 Entry 0x80041000 Cmdline : [ 0.000000] Linux version 2.6.37.6 (sebkinne@WorkstationMeltdown) (gcc version 4.5.4 20120105 (prerelease) (Linaro GCC 4.5-2012.01) ) #4 Sat Jan 28 03:52:49 CET 2012 [ 0.000000] ar2315-gpio: registered 22 GPIOs [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU revision is: 00019064 (MIPS 4KEc) [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone PFN ranges: [ 0.000000] Normal 0x00000000 -> 0x00002000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00002000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: console=ttyS0,9600 rootfstype=squashfs,jffs2 [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Memory: 29616k/32768k available (1993k kernel code, 3152k reserved, 311k data, 152k init, 0k highmem) [ 0.000000] NR_IRQS:128 [ 0.000000] console [ttyS0] enabled, bootconsole disabled [ 0.000000] console [ttyS0] enabled, bootconsole disabled [ 0.010000] Calibrating delay loop... 183.50 BogoMIPS (lpj=917504) [ 0.260000] pid_max: default: 32768 minimum: 301 [ 0.270000] Mount-cache hash table entries: 512 [ 0.290000] NET: Registered protocol family 16 [ 0.970000] bio: create slab <bio-0> at 0 [ 0.990000] pci 0000:00:00.0: BAR 1: can't assign mem (size 0x4000000) [ 1.000000] pci 0000:00:03.0: BAR 1: can't assign mem (size 0x4000000) [ 1.010000] pci 0000:00:00.0: BAR 2: assigned [mem 0x80800000-0x80bfffff] [ 1.020000] pci 0000:00:00.0: BAR 2: set to [mem 0x80800000-0x80bfffff] (PCI address [0x80800000-0x80bfffff]) [ 1.030000] pci 0000:00:03.0: BAR 2: assigned [mem 0x80c00000-0x80ffffff] [ 1.040000] pci 0000:00:03.0: BAR 2: set to [mem 0x80c00000-0x80ffffff] (PCI address [0x80c00000-0x80ffffff]) [ 1.050000] pci 0000:00:00.0: BAR 0: assigned [mem 0x81000000-0x8101ffff] [ 1.060000] pci 0000:00:00.0: BAR 0: set to [mem 0x81000000-0x8101ffff] (PCI address [0x81000000-0x8101ffff]) [ 1.070000] pci 0000:00:03.0: BAR 0: assigned [mem 0x81020000-0x8103ffff] [ 1.080000] pci 0000:00:03.0: BAR 0: set to [mem 0x81020000-0x8103ffff] (PCI address [0x81020000-0x8103ffff]) [ 1.090000] Switching to clocksource MIPS [ 1.110000] NET: Registered protocol family 2 [ 1.170000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 1.250000] TCP established hash table entries: 1024 (order: 1, 8192 bytes) [ 1.340000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 1.410000] TCP: Hash tables configured (established 1024 bind 1024) [ 1.490000] TCP reno registered [ 1.530000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 1.600000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 1.670000] NET: Registered protocol family 1 [ 1.730000] Radio config found at offset 0xf8(0x1f8) [ 1.800000] Radio MAC is blank; using board-data [ 1.870000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.940000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 2.050000] msgmni has been set to 57 [ 2.100000] io scheduler noop registered [ 2.150000] io scheduler deadline registered (default) [ 2.210000] gpiodev: gpio device registered with major 254 [ 2.280000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 2.380000] serial8250: ttyS0 at MMIO 0xb1100003 (irq = 37) is a 16550A [ 2.470000] cmdlinepart partition parsing not available [ 2.540000] Searching for RedBoot partition table in spiflash at offset 0x7d0000 [ 2.720000] Searching for RedBoot partition table in spiflash at offset 0x7e0000 [ 2.910000] 6 RedBoot partitions found on MTD device spiflash [ 2.980000] Creating 6 MTD partitions on "spiflash": [ 3.040000] 0x000000000000-0x000000030000 : "RedBoot" [ 3.110000] 0x000000030000-0x000000700000 : "rootfs" [ 3.180000] mtd: partition "rootfs" set to be root filesystem [ 3.240000] mtd: partition "rootfs_data" created automatically, ofs=350000, len=3B0000 [ 3.340000] 0x000000350000-0x000000700000 : "rootfs_data" [ 3.410000] 0x000000700000-0x0000007d0000 : "vmlinux.bin.l7" [ 3.490000] 0x0000007e0000-0x0000007ef000 : "FIS directory" [ 3.570000] 0x0000007ef000-0x0000007f0000 : "RedBoot config" [ 3.640000] 0x0000007f0000-0x000000800000 : "boardconfig" [ 3.790000] eth0: Atheros AR231x: 00:12:cf:a4:90:50, irq 4 [ 3.930000] ar231x_eth_mii: probed [ 3.970000] eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:00) [ 4.060000] TCP westwood registered [ 4.100000] NET: Registered protocol family 17 [ 4.150000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> [ 4.230000] All bugs added by David S. Miller <davem@redhat.com> [ 4.340000] VFS: Mounted root (squashfs filesystem) readonly on device 31:1. [ 4.420000] Freeing unused kernel memory: 152k freed - preinit - Press the [f] key and hit [enter] to enter failsafe mode - regular preinit - [ 13.830000] JFFS2 notice: (271) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 4 of xref (0 dead, 0 orphan) found. switching to jffs2 - init - Please press Enter to activate this console. [ 16.880000] Compat-wireless backport release: compat-wireless-2011-11-29 [ 16.960000] Backport based on wireless-testing.git master-2011-12-01 [ 17.450000] cfg80211: Calling CRDA to update world regulatory domain [ 21.250000] cfg80211: World regulatory domain updated: [ 21.310000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 21.410000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.510000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 21.600000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 21.700000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.790000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.900000] ath5k phy0: Atheros AR2315 chip found (MAC: 0x86, PHY: 0x48) [ 22.530000] cfg80211: Calling CRDA for country: US [ 22.710000] cfg80211: Regulatory domain changed to country: US [ 22.780000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 22.880000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 22.980000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 23.080000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.170000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.270000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.360000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 24.050000] RPC: Registered udp transport module. [ 24.110000] RPC: Registered tcp transport module. [ 24.160000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 25.530000] PPP generic driver version 2.4.2 [ 26.690000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 27.720000] NET: Registered protocol family 24 [ 28.490000] nf_conntrack version 0.5.0 (465 buckets, 1860 max) [ 35.300000] device eth0 entered promiscuous mode [ 35.450000] br-lan: port 1(eth0) entering forwarding state [ 35.510000] br-lan: port 1(eth0) entering forwarding state [ 41.520000] device eth0 left promiscuous mode [ 41.580000] br-lan: port 1(eth0) entering forwarding state [ 43.440000] device eth0 entered promiscuous mode [ 43.490000] br-lan: port 1(eth0) entering forwarding state [ 43.560000] br-lan: port 1(eth0) entering forwarding state [ 43.760000] device wlan0 entered promiscuous mode [ 43.820000] br-lan: port 2(wlan0) entering forwarding state [ 43.880000] br-lan: port 2(wlan0) entering forwarding state [ 45.470000] device wlan0 left promiscuous mode [ 45.530000] br-lan: port 2(wlan0) entering forwarding state [ 46.110000] device wlan0 entered promiscuous mode [ 46.160000] br-lan: port 2(wlan0) entering forwarding state [ 46.230000] br-lan: port 2(wlan0) entering forwarding state [ 48.310000] eth0: Configuring MAC for full duplex [ 72.130000] device wlan0 left promiscuous mode [ 72.190000] br-lan: port 2(wlan0) entering forwarding state [ 74.970000] device wlan0 entered promiscuous mode [ 75.090000] br-lan: port 2(wlan0) entering forwarding state [ 75.160000] br-lan: port 2(wlan0) entering forwarding state [ 77.330000] device wlan0 left promiscuous mode [ 77.380000] br-lan: port 2(wlan0) entering forwarding state [ 77.950000] device wlan0 entered promiscuous mode [ 78.010000] br-lan: port 2(wlan0) entering forwarding state [ 78.080000] br-lan: port 2(wlan0) entering forwarding state BusyBox v1.19.3 (2012-01-27 03:52:18 CET) built-in shell (ash) Enter 'help' for a list of built-in commands. _______ ________ __ \ | |.-----.-----.-----.| | | |.----.| |_ \ \ | - || _ | -__| || | | || _|| _| \ \ \ |_______|| __|_____|__|__||________||__| |____| <, .v , // ) ) ) ) ) |__| W I R E L E S S F R E E D O M \\; \// // / / / ATTITUDE ADJUSTMENT (bleeding edge, r29839) ---------- ;\\|||//; / / * 1/4 oz Vodka Pour all ingredients into mixing ,'<\/><\/` / * 1/4 oz Gin tin with ice, strain into glass.,.`X/\><\\>` * 1/4 oz Amaretto ;>/>><\\><\/` * 1/4 oz Triple sec |<\\>>X/<>/\| * 1/4 oz Peach schnapps `<\/><\/><\\; * 1/4 oz Sour mix '/\<>/\<>/' * 1 splash Cranberry juice `<\/><;` -----------------------------------------------------WiFi_Pineapple MKIII root@Pineapple:/#
Mk2 flashed with Mk3 package install problem
in WiFi Pineapples Mark I, II, III
Posted · Edited by La_Vallette
Attached is the boot information obtained from Serial of which I assume is wifi Pineapple mk2. (pic below)
My question is if all basic components like firmware etc is the latest I could flash or if there is something newer.
I changed it's ip address from 172.16.42.1 to 192.168.1.110 in order to connect it to my default gateway.
My pineapple has access to the internet as I tried ping google.com with success.
I am trying to update my packages with opkg update but the link seems to be down.
How can I fix this ? Is there any other way?
I cannot install any jasager version, madwifi, kmod etc..
I aprecciate if you can point me to recommended jasager and webif versions..
thanks
+PHY ID is 0022:5521 Ethernet eth0: MAC address 00:12:cf:a4:90:50 IP: 192.168.0.1/255.255.255.0, Gateway: 0.0.0.0 Default server: 0.0.0.0 RedBoot(tm) bootstrap and debug environment [ROMRAM] Non-certified release, version v1.3.4 - built 19:22:52, Oct 15 2007 Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. Board: ap51 RAM: 0x80000000-0x82000000, [0x8003eaf0-0x80fe1000] available FLASH: 0xa8000000 - 0xa87f0000, 128 blocks of 0x00010000 bytes each. == Executing boot script in 3.000 seconds - enter ^C to abort RedBoot> fis load -l vmlinux.bin.l7 Image loaded from 0x80041000-0x802a73e0 RedBoot> exec Now booting linux kernel: Base address 0x80030000 Entry 0x80041000 Cmdline : [ 0.000000] Linux version 2.6.37.6 (sebkinne@WorkstationMeltdown) (gcc version 4.5.4 20120105 (prerelease) (Linaro GCC 4.5-2012.01) ) #4 Sat Jan 28 03:52:49 CET 2012 [ 0.000000] ar2315-gpio: registered 22 GPIOs [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU revision is: 00019064 (MIPS 4KEc) [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 02000000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone PFN ranges: [ 0.000000] Normal 0x00000000 -> 0x00002000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00002000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128 [ 0.000000] Kernel command line: console=ttyS0,9600 rootfstype=squashfs,jffs2 [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes. [ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Memory: 29616k/32768k available (1993k kernel code, 3152k reserved, 311k data, 152k init, 0k highmem) [ 0.000000] NR_IRQS:128 [ 0.000000] console [ttyS0] enabled, bootconsole disabled [ 0.000000] console [ttyS0] enabled, bootconsole disabled [ 0.010000] Calibrating delay loop... 183.50 BogoMIPS (lpj=917504) [ 0.260000] pid_max: default: 32768 minimum: 301 [ 0.270000] Mount-cache hash table entries: 512 [ 0.290000] NET: Registered protocol family 16 [ 0.970000] bio: create slab <bio-0> at 0 [ 0.990000] pci 0000:00:00.0: BAR 1: can't assign mem (size 0x4000000) [ 1.000000] pci 0000:00:03.0: BAR 1: can't assign mem (size 0x4000000) [ 1.010000] pci 0000:00:00.0: BAR 2: assigned [mem 0x80800000-0x80bfffff] [ 1.020000] pci 0000:00:00.0: BAR 2: set to [mem 0x80800000-0x80bfffff] (PCI address [0x80800000-0x80bfffff]) [ 1.030000] pci 0000:00:03.0: BAR 2: assigned [mem 0x80c00000-0x80ffffff] [ 1.040000] pci 0000:00:03.0: BAR 2: set to [mem 0x80c00000-0x80ffffff] (PCI address [0x80c00000-0x80ffffff]) [ 1.050000] pci 0000:00:00.0: BAR 0: assigned [mem 0x81000000-0x8101ffff] [ 1.060000] pci 0000:00:00.0: BAR 0: set to [mem 0x81000000-0x8101ffff] (PCI address [0x81000000-0x8101ffff]) [ 1.070000] pci 0000:00:03.0: BAR 0: assigned [mem 0x81020000-0x8103ffff] [ 1.080000] pci 0000:00:03.0: BAR 0: set to [mem 0x81020000-0x8103ffff] (PCI address [0x81020000-0x8103ffff]) [ 1.090000] Switching to clocksource MIPS [ 1.110000] NET: Registered protocol family 2 [ 1.170000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 1.250000] TCP established hash table entries: 1024 (order: 1, 8192 bytes) [ 1.340000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 1.410000] TCP: Hash tables configured (established 1024 bind 1024) [ 1.490000] TCP reno registered [ 1.530000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 1.600000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 1.670000] NET: Registered protocol family 1 [ 1.730000] Radio config found at offset 0xf8(0x1f8) [ 1.800000] Radio MAC is blank; using board-data [ 1.870000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.940000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 2.050000] msgmni has been set to 57 [ 2.100000] io scheduler noop registered [ 2.150000] io scheduler deadline registered (default) [ 2.210000] gpiodev: gpio device registered with major 254 [ 2.280000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 2.380000] serial8250: ttyS0 at MMIO 0xb1100003 (irq = 37) is a 16550A [ 2.470000] cmdlinepart partition parsing not available [ 2.540000] Searching for RedBoot partition table in spiflash at offset 0x7d0000 [ 2.720000] Searching for RedBoot partition table in spiflash at offset 0x7e0000 [ 2.910000] 6 RedBoot partitions found on MTD device spiflash [ 2.980000] Creating 6 MTD partitions on "spiflash": [ 3.040000] 0x000000000000-0x000000030000 : "RedBoot" [ 3.110000] 0x000000030000-0x000000700000 : "rootfs" [ 3.180000] mtd: partition "rootfs" set to be root filesystem [ 3.240000] mtd: partition "rootfs_data" created automatically, ofs=350000, len=3B0000 [ 3.340000] 0x000000350000-0x000000700000 : "rootfs_data" [ 3.410000] 0x000000700000-0x0000007d0000 : "vmlinux.bin.l7" [ 3.490000] 0x0000007e0000-0x0000007ef000 : "FIS directory" [ 3.570000] 0x0000007ef000-0x0000007f0000 : "RedBoot config" [ 3.640000] 0x0000007f0000-0x000000800000 : "boardconfig" [ 3.790000] eth0: Atheros AR231x: 00:12:cf:a4:90:50, irq 4 [ 3.930000] ar231x_eth_mii: probed [ 3.970000] eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:00) [ 4.060000] TCP westwood registered [ 4.100000] NET: Registered protocol family 17 [ 4.150000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> [ 4.230000] All bugs added by David S. Miller <davem@redhat.com> [ 4.340000] VFS: Mounted root (squashfs filesystem) readonly on device 31:1. [ 4.420000] Freeing unused kernel memory: 152k freed - preinit - Press the [f] key and hit [enter] to enter failsafe mode - regular preinit - [ 13.830000] JFFS2 notice: (271) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 4 of xref (0 dead, 0 orphan) found. switching to jffs2 - init - Please press Enter to activate this console. [ 16.880000] Compat-wireless backport release: compat-wireless-2011-11-29 [ 16.960000] Backport based on wireless-testing.git master-2011-12-01 [ 17.450000] cfg80211: Calling CRDA to update world regulatory domain [ 21.250000] cfg80211: World regulatory domain updated: [ 21.310000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 21.410000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.510000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 21.600000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 21.700000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.790000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.900000] ath5k phy0: Atheros AR2315 chip found (MAC: 0x86, PHY: 0x48) [ 22.530000] cfg80211: Calling CRDA for country: US [ 22.710000] cfg80211: Regulatory domain changed to country: US [ 22.780000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 22.880000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 22.980000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 23.080000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.170000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.270000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.360000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 24.050000] RPC: Registered udp transport module. [ 24.110000] RPC: Registered tcp transport module. [ 24.160000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 25.530000] PPP generic driver version 2.4.2 [ 26.690000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 27.720000] NET: Registered protocol family 24 [ 28.490000] nf_conntrack version 0.5.0 (465 buckets, 1860 max) [ 35.300000] device eth0 entered promiscuous mode [ 35.450000] br-lan: port 1(eth0) entering forwarding state [ 35.510000] br-lan: port 1(eth0) entering forwarding state [ 41.520000] device eth0 left promiscuous mode [ 41.580000] br-lan: port 1(eth0) entering forwarding state [ 43.440000] device eth0 entered promiscuous mode [ 43.490000] br-lan: port 1(eth0) entering forwarding state [ 43.560000] br-lan: port 1(eth0) entering forwarding state [ 43.760000] device wlan0 entered promiscuous mode [ 43.820000] br-lan: port 2(wlan0) entering forwarding state [ 43.880000] br-lan: port 2(wlan0) entering forwarding state [ 45.470000] device wlan0 left promiscuous mode [ 45.530000] br-lan: port 2(wlan0) entering forwarding state [ 46.110000] device wlan0 entered promiscuous mode [ 46.160000] br-lan: port 2(wlan0) entering forwarding state [ 46.230000] br-lan: port 2(wlan0) entering forwarding state [ 48.310000] eth0: Configuring MAC for full duplex [ 72.130000] device wlan0 left promiscuous mode [ 72.190000] br-lan: port 2(wlan0) entering forwarding state [ 74.970000] device wlan0 entered promiscuous mode [ 75.090000] br-lan: port 2(wlan0) entering forwarding state [ 75.160000] br-lan: port 2(wlan0) entering forwarding state [ 77.330000] device wlan0 left promiscuous mode [ 77.380000] br-lan: port 2(wlan0) entering forwarding state [ 77.950000] device wlan0 entered promiscuous mode [ 78.010000] br-lan: port 2(wlan0) entering forwarding state [ 78.080000] br-lan: port 2(wlan0) entering forwarding state BusyBox v1.19.3 (2012-01-27 03:52:18 CET) built-in shell (ash) Enter 'help' for a list of built-in commands. _______ ________ __ \ | |.-----.-----.-----.| | | |.----.| |_ \ \ | - || _ | -__| || | | || _|| _| \ \ \ |_______|| __|_____|__|__||________||__| |____| <, .v , // ) ) ) ) ) |__| W I R E L E S S F R E E D O M \\; \// // / / / ATTITUDE ADJUSTMENT (bleeding edge, r29839) ---------- ;\\|||//; / / * 1/4 oz Vodka Pour all ingredients into mixing ,'<\/><\/` / * 1/4 oz Gin tin with ice, strain into glass.,.`X/\><\\>` * 1/4 oz Amaretto ;>/>><\\><\/` * 1/4 oz Triple sec |<\\>>X/<>/\| * 1/4 oz Peach schnapps `<\/><\/><\\; * 1/4 oz Sour mix '/\<>/\<>/' * 1 splash Cranberry juice `<\/><;` -----------------------------------------------------WiFi_Pineapple MKIII root@Pineapple:/#