jimbojetset
-
Posts
5 -
Joined
-
Last visited
Posts posted by jimbojetset
-
-
Definitely NOT a power problem... I have found a way to install infusions manually via SSH.
If I paste the following into a text editor and replace $name with the name of the infusion and $version with the version of the infusion then copy and paste from the text editor into the ssh console then the infusion installs to my USB perfectly...
************************************************************************************************************************************
mkdir -p /usb/tmp/infusionswget -O /usb/tmp/infusions/mk4-module-$name-$version.tar.gz "http://cloud.wifipineapple.com/index.php?downloads&downloadModule=$name&moduleVersion=$version"mkdir -p /usb/infusions/rm /pineapple/infusions/usbModulesln -s /usb/infusions /pineapple/infusions/usbInfusionstar -xzf /usb/tmp/infusions/mk4-module-$name-$version.tar.gz -C /usb/tmp/infusions/config=$(cat /usb/tmp/infusions/mk4-module-$name-$version/module.conf)confName=$(echo "$config" | grep -i name | awk '{split($0,array,"=")} END{print array[2]}')confVersion=$(echo "$config" | grep -i version | awk '{split($0,array,"=")} END{print array[2]}')confAuthor=$(echo "$config" | grep -i author | awk '{split($0,array,"=")} END{print array[2]}')confStartPage=$(echo "$config" | grep -i startPage | awk '{split($0,array,"=")} END{print array[2]}')confSupportLink=$(echo "$config" | grep -i supportLink | sed 's/supportLink=//g')mv /usb/tmp/infusions/mk4-module-$name-$version/$confName /usb/infusions/rm -rf /usb/tmp/infusionsecho "$confName|$confVersion|$dest|$confStartPage|$confSupportLink" >> /pineapple/infusions/moduleListopkg update && opkg install $name --dest usb*****************************************************************************************************************************************The last line is only needed if a package is required for the infusion...It seems to work fine for me but not an ideal solution.... when I get time I will investigate further as to why the whole procedure is not reaching this point... -
USB link to Laptop
-
I was able to install modules fine with 2.8.1 it was only after setting up a USB stick (as per the manual) was I no longer able to install any modules to any location.
No amount of un-configuring the USB, system resetting or firmware re-flashing will fix the problem.
-
OK...
When I goto the pineapple bar and click on
List available Infusions (aka modules)
I am then presented with a list of available infusions such as sslstrip etc...
Regardless of the infusion I choose... when I click on install (internal or USB) the page just hangs with the message
Please wait, the infusion is being downloaded and installed.
Depending on network speed and infusion size, this could take a while.I've left it like this for hours but nothing ever installs.
Things to note...
When I first powered the device and update to 2.8.1 the Pineapple Bar worked perfectly but because I had no USB storage I was limited. The problem with the Pineapple bar only started after I configured a USB stick with a swap partition.
I have an 8GB USB stick configured for swap file and data... this all shows up correctly on both the USB & Resources pages.
I have reset & re-flashed to 2.8.1 several times but no joy.
Tried using the Pineapple Bar without having the USB configured but no joy.
I can putty(ssh) into the box and use opkg install --dest usb sslstrip and it does install, but nothing shows in the pineapple web interface.
The USB ext4 partitions were created in debian linux.
Does anyone have any ideas ??
Problem Installing Infusions
in WiFi Pineapple Mark IV
Posted
Thats a great help thanks....